8431 Results
Active, high-impedance probes can be connected to spectrum analyzers, providing a practical and highly precise measurement solution to overcome an otherwise cumbersome RF testing issue. This application note provides information on how to use oscilloscope probes in RF measurements using spectrum analyzers
04-Jul-2023 | AN-No. 1EF116
Creating MediaFLO™ Test Scenarios in Accordance with the Minimum Performance Specification (MPS) V 1.2
31-Aug-2006 | AN-No. 7BM62
Internal Data Transfer between Windows 3.1 / Excel and Vector Network Analyzer ZVR
28-Jul-1998 | AN-No. 1EZ39
Measurements on Hearing Aids with the Audio Analyzers UPL and UPD
04-Jun-1998 | AN-No. 1GA34
This application note provides information how to perform noise figure measurements under pulsed or bursted conditions with spectrum analyzers and noise sources.
28-Jun-2018 | AN-No. 1EF103
Measurements on 3GPP WCDMA User Equipment According to Standard TS 34.121
10-Dec-2008 | AN-No. 1MA68
Verify the energy efficiency of your O-RAN radio units
19-Mar-2024
Rohde&Schwarz Smart Instruments Family300 Basic Programming Guide
25-Jun-2007 | AN-No. 1MA73
Rohde & Schwarz Realtime deembedding with the R&S®RTP
25-Sep-2018
Remote Emulation with the R&S<sup>®</sup>SMF100A Microwave Signal Generator
11-Oct-2016 | AN-No. 1GP92
Remote Emulation with the R&S<sup>®</sup>NRP2 Power Meter
28-Feb-2012 | AN-No. 1GP83
Buffer Analysis MPEG-2 TS Analysis & Monitoring
23-Mar-2006 | AN-No. 7BM53
Trace minimum hold function and utilize better visualization of persistent interferers with the R&S®MNT100, R&S®PR200, R&S®PR100 and R&S®DDF007.
15-Jul-2019
For A/V devices such as smartphones, tablet PCs, Blu-ray players, set-top boxes and TV sets, the perceived video quality must satisfy very high standards. A/V devices need to hold their own in three main areas: ı Stability (environmental influences, response to source signal disturbances, etc.) ı Performance (switching times, delays) ı Compliance with standards (input and output formats) Any deviations from the expected video and audio output can be automatically and precisely detected with R&S A/V distortion analysis on all common analog and digital interfaces such as HDMI™ and MHL™. This document examines the relevant setups and configurations.
15-Oct-2014 | AN-No. 7BM87
This application note covers the fundamentals of analog component signals and shows how the signal quality can be measured.
28-May-2015 | AN-No. 7MH107
Spurious Emission Measurement on 3GPP Base Station Transmitters
10-Jan-2002 | AN-No. 1EF45
Rohde & Schwarz offers RF solid-state amplifiers for various frequencies ranging from 9 kHz to 6 GHz and delivering CW power up to 80 kW.
27-Apr-2016
Synchronous Node B Testing with R&S CMU300
10-Nov-2005 | AN-No. 1CM58
Alibi verification with cellular network analysis
10-Apr-2024
This document is divided in two parts and starts with an introduction in AC-DC conversion principles in general. It will present the most common circuits used for different power levels. The switching mode power supply (SMPS) converter will be the main focus as they are used everywhere in the electronics. Especially the flyback converter design in different flavors are highlighted. Nevertheless, all measurements are also applicable for other SMPS converter designs operating at higher power levels.In the second part of this document, most relevant testing methods and procedures of an AC-DC converter are highlighted. For each testing section, a fundamental part will be upfront discussed and it is followed by a presentation of a suitable measurement method. In this second part, the device under test (DUT) is considered as black box device and thus the structure is similar. Therefore, the testing parts consists of methods related to input tests, output tests and a combination of both like efficiency. Of course, some test performed at the output of the converter are also relevant for DC-DC converter, e.g. the validation of the output ripple.
14-Nov-2022 | AN-No. 1SL387
Handheld solutions from Rohde & Schwarz support a gated trigger, enabling users to separate uplink and downlink signals in the time domain.
09-Apr-2019
Conversion Gain Measurements on Mixers with Different Input and Output Impedances
16-May-2002 | AN-No. 1EZ50
Frequency Response Compensation for SMx Generator Series
27-Oct-2009 | AN-No. 1MA56
VOR-Receiver Tests using the Signal Generator SMT
06-Jul-1994 | AN-No. 1GPAN10
How to implement GTSL outside a test stand environment
02-Jul-2002 | AN-No. 1SC01