R&S®ZV-WRx/ZCWMxx waveguide calibration kits

up to 1100 GHz

R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Open Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Open Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Open Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Open Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Open Lightbox
R&S®ZV-WRx network analyzer calibration kits – waveguide, Front High R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view

Key facts

  • Waveguide calibration kit series covering 50 GHz to 1100 GHz
  • Including match, short, offset short
  • Optional version including sliding match
  • Calibration kit parameters pre-installed in R&S®VNAs
  • Calibration kit versions with sliding match available

Extending to the mmWave range

The R&S®ZV-WRxx calibration kit series provides waveguide calibration standards for system error correction of mmWave network analyzer setups. All common waveguide bands from 50 GHz to 1100 GHz are supported. The calibration kits contain short, offset short and match. Separate models with a sliding match are also available. The sets come with a hex ball driver and hex ball screws. The calibration kit data are pre-defined on each Rohde & Schwarz vector network analyzer, allowing for straightforward and reliable calibration.

Features & benefits

Sliding match models

Get high-end accuracy

There are extra models that include a sliding match. Using a sliding match instead of a fixed match further increases measurement accuracy.

ZV-WR10 kit with sliding match
Open Lightbox

ZV-WR10 kit with sliding match

High mechanical stability

Short with offset margin for reliable results

Especially with the high-frequency kits, a bare lambda/4 shim standard is very thin, which can result in tensions and bending when connected and in poor accuracy. To ensure reliable results, the shim standard for some ZV-WRxx kits is designed with an additional offset length to ensure high mechanical stability and reproducible results. (Please note: the dedicated offset short is a different standard.)

Available models

Available models
Models
Type
Frequency range
Connector type
Calibration standards

R&S®ZV-WR02

Order number 1314.5550.10

Click on order no. to copy
Order number 1314.5550.10 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
325 GHz to 500 GHz
Connector type
WR02
Calibration standards
Short, Offset Short, Match,  without sliding Match

R&S®ZV-WR03

Order number 1307.7300.30

Click on order no. to copy
Order number 1307.7300.30 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
220 GHz to 325 GHz
Connector type
WR03
Calibration standards
without sliding match

R&S®ZV-WR03

Order number 1307.7300.31

Click on order no. to copy
Order number 1307.7300.31 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
220 GHz to 325 GHz
Connector type
WR03
Calibration standards
with sliding match

R&S®ZV-WR05

Order number 1307.8106.10

Click on order no. to copy
Order number 1307.8106.10 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
140 GHz to 220 GHz
Connector type
WR05
Calibration standards
without sliding match

R&S®ZV-WR05

Order number 1307.8106.11

Click on order no. to copy
Order number 1307.8106.11 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
140 GHz to 220 GHz
Connector type
WR05
Calibration standards
with sliding match

R&S®ZV-WR06

Order number 1311.8807.10

Click on order no. to copy
Order number 1311.8807.10 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
110 GHz to 170 GHz
Connector type
WR06
Calibration standards
without sliding match

R&S®ZV-WR06

Order number 1311.8807.11

Click on order no. to copy
Order number 1311.8807.11 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
110 GHz to 170 GHz
Connector type
WR06
Calibration standards
with sliding match

R&S®ZV-WR08

Order number 1307.7900.10

Click on order no. to copy
Order number 1307.7900.10 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
90 GHz to 140 GHz
Connector type
WR08
Calibration standards
without sliding match

R&S®ZV-WR08

Order number 1307.7900.11

Click on order no. to copy
Order number 1307.7900.11 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
90 GHz to 140 GHz
Connector type
WR08
Calibration standards
with sliding match

R&S®ZV-WR10

Order number 1307.7100.10

Click on order no. to copy
Order number 1307.7100.10 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
75 GHz to 110 GHz
Connector type
WR10
Calibration standards
without sliding match

R&S®ZV-WR10

Order number 1307.7100.11

Click on order no. to copy
Order number 1307.7100.11 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
75 GHz to 110 GHz
Connector type
WR10
Calibration standards
with sliding match

R&S®ZV-WR12

Order number 1307.7700.10

Click on order no. to copy
Order number 1307.7700.10 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
60 GHz to 90 GHz
Connector type
WR12
Calibration standards
without sliding match

R&S®ZV-WR12

Order number 1307.7700.11

Click on order no. to copy
Order number 1307.7700.11 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
60 GHz to 90 GHz
Connector type
WR12
Calibration standards
with sliding match

R&S®ZV-WR15

Order number 1307.7500.30

Click on order no. to copy
Order number 1307.7500.30 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
50 GHz to 75 GHz
Connector type
WR15
Calibration standards
without sliding match

R&S®ZV-WR15

Order number 1307.7500.31

Click on order no. to copy
Order number 1307.7500.31 is now copied to your clipboard.
Type
Waveguide calibration kit
Frequency range
50 GHz to 75 GHz
Connector type
WR15
Calibration standards
with sliding match

R&S®ZCWM-1092

Order number 3628.5699.02

Click on order no. to copy
Order number 3628.5699.02 is now copied to your clipboard.
Type
Waveguide Calibration Kit
Frequency range
170 GHz to 260 GHz
Connector type
WM-1092
Calibration standards
without sliding match

R&S®ZCWM-710

Order number 1339.4070.02

Click on order no. to copy
Order number 1339.4070.02 is now copied to your clipboard.
Type
Waveguide Calibration Kit
Frequency range
260 GHz to 400 GHz
Connector type
WM-710
Calibration standards
without sliding match

R&S®ZCWM-570

Order number 1322.3099.10

Click on order no. to copy
Order number 1322.3099.10 is now copied to your clipboard.
Type
Waveguide Calibration Kit
Frequency range
330 GHz to 500 GHz
Connector type
WM-570
Calibration standards
without sliding match

R&S®ZCWM-380

Order number 1322.3101.02

Click on order no. to copy
Order number 1322.3101.02 is now copied to your clipboard.
Type
Waveguide Calibration Kit
Frequency range
500 GHz to 750 GHz
Connector type
WM-380
Calibration standards
without sliding match

R&S®ZCWM-250

Order number 1322.3118.02

Click on order no. to copy
Order number 1322.3118.02 is now copied to your clipboard.
Type
Waveguide Calibration Kit
Frequency range
750 GHz to 1100 GHz
Connector type
WM-250
Calibration standards
without sliding match

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.