Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
104 Results
In civil aviation, instrument landing system (ILS) transmitters use antenna arrays to provide guidance to approaching aircraft. ILS performance strongly depends on the precise alignment of the magnitude and phase of each element in an antenna array. The R&S®ZNH handheld vector network analyzer with a built-in source allows fast, convenient on-site measurements on the ILS antenna system.
09-Aug-2021
More and more mobile radio networks implement remote radio equipment (RE) that is connected to the base station main unit via a digital interface using standardized transmission protocols such as CPRI. For testing RE devices Rohde & Schwarz offers a complete test solution based on the R&S®EX-IQ-BOX [Model K04]. This key component is a configurable digital interface module that is used to connect Rohde & Schwarz test equipment to a RE under test using CPRI data transmission. This application note explains in detail the instrument setup and configuration needed to successfully test your remote radio head.
05-Aug-2013 | AN-No. 1GP78
The strict requirement of network synchronization is as old as digital cellular mobile networks. As soon as cells have a neighbor relationship, network synchronization is mandatory in both the frequency and time domains in order to ensure UE QoE and performance (Handover, MIMO, data throughput, etc.). This educational note describes how 5G NR with its extremely flexible specifications is affected by these synchronization requirements, and how it can be measured?
17-Aug-2021 | AN-No. 8NT05
Over the past few years, electronics developers have developed a variety of approaches to avoid interference on high-speed signals on printed circuit boards. However, with increasing complexity and frequency, PCBs set new limits, supporting frequencies of 40 GHz and higher. Driven by the fast growing 5G market, today’s digital systems operate in these high frequency ranges that come with completely new challenges. With slope steepness’s of just a few picoseconds, any discontinuity in the impedance and impairment of the inductance or capacitance on the PCB or back drill defects on the PCB can have a massive impact on the signal quality. The industry recognizes that there is a growing need for functional high-speed testing of PCBs. The MicroCraft® E2V6151 series combined with an R&S®ZNB vector signal analyzer delivers a fully automated solution.
25-Mar-2020
Frequency converters e.g. in satellite transponders need to be characterized not only in terms of amplitude transmission but also in terms of phase transmission or group delay, especially with the transition to digital modulation schemes. They often do not provide access to the internal local oscillators. This application note describes a method using the R&S®ZNA analyzer family to measure group delay of mixers and frequency converters with an embedded local oscillator very accurately. The key aspect of this new technique is that the network analyzer applies a 2-tone signal to the frequency converter. By measuring the phase differences between the two signals at the input and at the output, it calculates group delay and relative phase.
11-Jul-2019 | AN-No. 1EZ81
Automating measurement setups is advantageous for multiple reasons. It saves time in case of repeated measurements and in hazardous environments, instruments can be operated from a distance. The measurements are repeatable because they are always performed with a defined procedure, leading to higher test confidence.But in remote control applications, users often perceive synchronization and binary transfers as challenging. Therefore, this application note focuses on binary transfer of data to and from the instrument and shows code example to demonstrate the ease of use.
31-Mar-2022 | AN-No. 1SL381
This whitepaper provides an overview of the WLAN offload in LTE as standardized by 3GPP, as well as the enhancements for Wi-Fi standardized by IEEE and the Wi-Fi Alliance. It also describes access methods in the joint network, treats the security, and describes IP mobility. In addition network discovery and selection are explained.
10-Dec-2012 | AN-No. 1MA214
This application note explains how to perform LTE base station measurements over the air (OTA) using the R&S®FSH4/8/13/20 handheld spectrum analyzer. It describes the required measurement setup and explains the results obtained with the different measurement modes.
12-Sep-2013 | AN-No. 1EF87
Although the commercialization of LTE technology began in end 2009, the technology is still being enhanced in order to meet ITU-Advanced requirements. This white paper summarizes these necessary improvements, which are known as LTE-Advanced.
20-Aug-2012 | AN-No. 1MA169
The new R&S®DATA-NPT mobile network performance test from Rohde & Schwarz brings innovation to network performance testing. The patent-pending testing solution is a very compact and resource-saving implementation of a new measurement procedure that simultaneously measures the maximum data capacity and the minimum continuous connectivity in a mobile network.
21-Apr-2016
The LTE technology as specified within 3GPP Release 8 was first commercially deployed by end 2009. Since then the number of operators implementing the technology is strongly increasing around the globe. LTE has become the fastest developing mobile system technology. The same way GSM and WCDMA have been enhanced with additional features over time, LTE is continuously worked on. Initial enhancements have been included in 3GPP Release 9 and are described in this white paper.
19-Dec-2011 | AN-No. 1MA191
This application note explains how to detect, characterize, find and document interferers in cellular networks using the R&S®FSH spectrum analyzer.First it explains how to use the spectrum and interference analysis functions during each step of interference hunting. It also illustrates the explanations with a common interferer example. Then it points out the most common interference sources in cellular networks and gives tips on how to identify them.
21-Oct-2014 | AN-No. 1EF89
This application notes introduces the Multi-Standard Radio Analyzer function of the R&S®FSW and shows how it performs the measurement on multi-standard radio transmitters. It reveals interactions caused by the coexistence of signals of different cellular standards and localizes the root cause. With an example of a base station signal consisting of three radio access technologies (GSM/WCDMA/LTE FDD) it shows how easy interactions can be found. The R&S®FSW is the ideal tool for trouble shooting tasks with its combination of a large bandwidth and the versatile Multi-Standard Radio Analyzer in one measurement instrument.
17-Jul-2012 | AN-No. 1EF83
3GPP Release 9 Technical Specification (TS) 37.141 covers multistandard radio base station conformance testing. Multistandard radio includes four standards of mobile communications: GSM, WCDMA, TD-SCDMA, and LTE. This application note introduces the concept of multistandard radio base stations as well as solutions for transmitter and receiver tests based on Rohde & Schwarz signal generators and Rohde & Schwarz signal and spectrum analyzers.
06-Jul-2012 | AN-No. 1MA198