138 Results
05-Jun-2024
Rohde & Schwarz approved by USB-IF for USB 3.2 Gen 1 & Gen 2 transmitter and receiver compliance testingThe USB-IF has approved the USB 3.2 compliance test solution from Rohde & Schwarz, confirming that it meets the stringent requirements set by the standardization body. Manufacturers of USB devices can have full confidence in the accuracy and reliability of the test results produced by the test solution.
Rohde & Schwarz Manual for USB 2.0 Compliance Test Fixture Set R&S®RT-ZF1. Describes the fixture boards and measurement preparations.
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB Type-C to Type-C cable assemblies supporting USB4 Gen3, USB4 Gen2, USB 3.2 Gen2, USB3.2 Gen1, and USB2.0.
30-Nov-2023 | AN-No. 1SL405
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB Type-C to legacy cable assemblies supporting USB3.1 Gen2, USB3.1 Gen1, and USB2.0. Based on 5 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.
18-Jan-2024 | AN-No. 1SL406
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB Type-C to legacy adapter assemblies supporting USB3.1 Gen1, and USB2.0. Based on 5 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.
18-Jan-2024 | AN-No. 1SL407
Rohde & Schwarz installation manual for the R&S®HO720 and R&S®HO730 Dual Interface modules.
With the R&S ® RTB2000 digital oscilloscopes, you control and interact remotely via LAN. These oscilloscopes incorporate the USB-based connectivity standard media transfer protocol (MTP).
20-Mar-2017
R&S®RTP-K101: Compliance test for USB 3.2 Gen 1&2 - Fact Sheet Brochures and Data Sheets
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB 3.2 Legacy Cable Testing for USB Type A, Type B, and Micro family connector types. Based on 5 Gbps and 10 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.
09-Nov-2023 | AN-No. 1SL408
Operating manuals commonly focus on explaining a dedicated feature of a single instrument. This application note examines a range of typical user tasks and how to solve them with the different instruments.
26-Apr-2013 | AN-No. 1GP72
Models: R&S®RTO-K21, R&S®RTO6-K21, R&S®RTP-K21, R&S®RTP-K102
28-Nov-2023
Unique Rohde & Schwarz 170 GHz power sensors ease use and traceability in the D-bandRohde & Schwarz is launching the new R&S NRP170TWG(N) thermal power sensor for precise power level measurements in the D-band. It is the only RF power sensor on the market that offers full traceability to national metrology institutes (NMI) in the frequency range from 110 GHz to 170 GHz, an important prerequisite for commercializing the frequency band. The R&S NRP170TWG(N) hardware is designed to reduce measurement noise and drift, while remaining very accurate and easy to use. The sensors are fully calibrated plug & play devices that can be easily integrated into any measurement setup with a USB or LAN connection.
Installing a USB-GPIB adapter
04-Apr-2024
Rohde & Schwarz introduces new R&S NPA family of compact power analyzers for all power measurement requirementsA new family of Rohde & Schwarz power analyzers is now available in three models to meet all requirements for measuring voltage, current, power and total harmonic distortion on both DC and AC sources. The R&S NPA101 power meter provides all basic measurements, the R&S NPA501 power analyzer adds enhanced measurement functions and graphical analysis, and the R&S NPA701 compliance tester includes evaluation functions in line with IEC 62301 and EN 50564 for power consumption and EN 61000-3-2 for EMC harmonic emission testing.
12-Sep-2023
Rohde & Schwarz continues to drive early 6G and sub-THz research with new dedicated W and D band test solutionsRohde & Schwarz rolls out cutting-edge RF test & measurement solutions for mmWave and sub-THz research at EuMW 2023 to characterize devices for 6G and novel sensing and automotive radar applications of tomorrow.
The Rohde & Schwarz manual describes the probe interface extender, which leads out the Rohde & Schwarz probe interface 1 to USB-C for power and control, or SMA for signal and DC jack for auxiliary supply.
Analysis of a USB-C cable in frequency and time domain and eye diagram In combination with the time domain option R&S®ZNA-K2 and the extended time domain option R&S®ZNA-K20, the R&S®ZNA VNA offers a variety of signal integrity measurements.
Rohde & Schwarz Realtime deembedding with the R&S®RTP
25-Sep-2018
04-Apr-2024
Rohde & Schwarz presents new R&S NGC100 power supply series with market-leading functionsThe R&S NGC100 are the latest DC power supplies from Rohde & Schwarz for every-day manual use in the laboratory as well as for automated applications. They offer an extremely wide range of functions for entry level instruments. The R&S NGC100 power supply series includes one, two, and three-channel models supplying up to 32 V, 10 A and 100 W DC power.
21-Feb-2024
Rohde & Schwarz first to test 5G eCall interoperability of Quectel’s 5G module with its wideband radio communication testerQuectel Wireless Solutions, a global IoT solutions provider, and Rohde & Schwarz have successfully validated Quectel’s innovative 5G eCall module, part of the AG56xN series of automotive modules. For the test, the R&S CMX500 wideband radio communication tester has been used. The test setup will be shown at Mobile World Congress 2024.
The R&S®RTB2000 can be directly connected to a PC via the built-in USB host and USB device ports. The USB host transfers screenshots or instrument settings to a USB stick. The R&S®RTB2000 can be directly connected to a PC via the built-in USB host and USB device ports. The USB host transfers screenshots or instrument settings to a USB stick.
RTO-K21 USB2.0 Compliance Test for R&S® RTO digital oscilloscopes
R&S RTO/R&S RTP USB 2.0/3.2 Compliance Test User Manual. The user manual describes the USB 2.0 compliance test procedures.
What kind of USB stick would be needed for the RTC?
USB, Compliance testing, compliance measurements USB 2.0 compliance testing - Understanding the USB tree structure of a PC
USB, Compliance testing, compliance measurements USB 2.0 compliance testing - Understanding the USB tree structure of a PC: practical demo
USB Write Protection Utility for R&S® ZVA/B/T Network Analyzers
USB TMC Connection with HMO3000 fails
File format for the USB stick used on a NGP800
To use the NGPxxx DC power supply from your PC connected via USB - what would be needed?