868 Results
The R&S®ZNB vector network analyzer together with the R&S®HF907 double-ridged waveguide horn antenna provides fast and accurate TD SVSWR measurements in line with ANSI C63.25.
06-Aug-2018
The new demonstrator solution consists of the R&S®TSME ultracompact drive test scanner and R&S ROMES drive test software to enable over-the-air characterization of 5G network coverage. This enables to test the performance of the initial 5G network deployments in the field to allow the progression of the technology.
18-Jan-2023
Rohde & Schwarz announces major boost for phase noise analysis and VCO measurements portfolioRohde & Schwarz introduces improved performance for phase noise analysis and voltage-controlled oscillator (VCO) measurements. Both the high end R&S FSWP phase noise analyzer and VCO tester plus signal and spectrum analyzer in one instrument, and the R&S FSPN dedicated phase noise analyzer and VCO tester, are now upgraded. Simultaneous hardware and software upgrades improve the market-leading performance even further, reducing noise levels and measurement times, and increasing accuracy. Both analyzers include test sequence recording functions (SCPI recorder), unique for this class of instrument.
Gain transfer method is an example of OTA test system calibration. The video demonstrates the gain transfer method in order to carry out repeatable and reliable over-the-air (OTA) measurements.
25-Jul-2023
Rohde & Schwarz at IDEF: technology systems for deployment on land, in the air and at seaAs a systems partner and integrator for secure communications architectures and monitoring networks, Rohde & Schwarz presents its latest innovations in the fields of secure communications, strategic and tactical communications intelligence, security scanners and test and measurement.
17-Dec-2020
Rohde & Schwarz and IHP first to characterize D-band frequencies in over-the-air test setup for 6G and automotive radarAcademia and key industry players have identified the D-Band, ranging from 110 GHz to 170 GHz, as a candidate frequency band for beyond 5G and 6G mobile communications as well as for future automotive radar applications. Rohde & Schwarz continues its pioneering sub-THz research efforts with focus in this frequency range, reaching new milestones. In collaboration with IHP, Rohde & Schwarz has performed the industry’s first full 2D/3D antenna characterization of transceiver modules operating in the D-Band.
Use the R&S®ZVA vector network analyzer and R&S®BBA150 broadband amplifier for accurate and reproducible results in minimum test time.
27-Sep-2013
The R&S CMW platform covers all test cases defined by Bluetooth SIG. The video demonstrates Bluetooth 5 measurements using the R&S CMW270 wireless connectivity tester.
Measurements on Hearing Aids with the Audio Analyzers UPL and UPD
04-Jun-1998 | AN-No. 1GA34
EMC32-S: RF indicator while running an EMS test
R&S®Server-Based Testing helps reduce test times for 5G New Radio multicarrier signals - each component carrier can be analyzed independently and in parallel.
13-Sep-2021
the details of carrier aggregation, its different types and its impact on how to test a device that supports carrier aggregation.
08-Dec-2022
Rohde & Schwarz and Löhnert Elektronik present a robot-based solution for end-of-line measurement of automotive radomes and bumpersTogether with its partner Löhnert Elektronik, Rohde & Schwarz has introduced a fully automated turnkey solution for bumper production radar transparency testing based on the successful R&S QAR50. The lightweight and compact setup of the R&S QAR50-R facilitates precise positioning of the measurement antennas, allowing faster, more accurate and convenient testing. This leads to higher throughput and yeilds as well as more flexiblity to adapt to different DUTs, for End-of-line (EOL) measurements of bumpers and other exterior parts.
This application note focuses on satellite post-launch or on-orbit measurement and monitoring strategies used for satellite functionality checks.
25-Nov-2016 | AN-No. 1MA263
In this paper a rapid characterization of high speed digital channels using a multiport VNA is demonstrated.The VNA is a major tool in the field of communication and signal processing.
18-Mar-2020 | AN-No. 1EZ83_0E
This application note describes topics such as: characteristics and implementation of RF signal paths, image responses etc. for the R&S®ESW EMI test receiver.
19-Nov-2020 | AN-No. 1EE26
This application note along with its corresponding white paper 1MA207 show how to use the R&S radar product portfolio to tackle test and measurement tasks in modern radar technology.
10-Aug-2012 | AN-No. 1MA127
This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.
26-Apr-2013 | AN-No. 1GP94
This application note provides information how to perform spectral emission measurements on UWB signals with spectrum analyzers using wide bandwidth RBW filters.
28-Jun-2021 | AN-No. 1EF109
LTE, RF conformance testing, 3GPP TS 36.521-1, PRACH measurements, CMW500 ,wideband radio communication tester The Rohde & Schwarz webinar focuses on the amendments made to 3GPP TS 36.521-1 and explains the enhanced test definitions.
16-Feb-2021
Rohde & Schwarz enters source measure unit market with the new R&S NGUWith two new source measure units (SMU), Rohde & Schwarz enters a market previously not addressed by the power products of the test and measurement specialist. The performance of the new R&S NGU201 and R&S NGU401 SMUs enables simultaneous sourcing and measuring of currents and voltages with high precision. The two-quadrant R&S NGU201 addresses wireless device battery tests and automatically switches from source mode to sink mode at a defined positive input voltage. The four-quadrant R&S NGU401 can also switch at negative voltages, supporting source measurements for a vast range of power supply types.
This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to perform HSDPA Tests (from Rel.5 up to Rel.8 / DC-HSDPA+) measurements on transmitter characteristics and receiver characteristics in line with TS 34.121 V9.5.0.
17-Aug-2012 | AN-No. 1CM96
Rohde & Schwarz offers a powerful tool for remote control of their oscilloscopes - the RsInstrument Python module. This module enables users to control and automate their Rohde & Schwarz test & measurement instruments, including oscilloscopes, through Python scripts or interactive console communication.
14-Dec-2023
04-Nov-2021
Rohde & Schwarz supports 5G research at University of Glasgow with network test equipmentEquipment for electromagnetic field research, provided by Rohde & Schwarz, will help advance the knowledge base at the University of Glasgow regarding electromagnetic fields radiating from 5G sites. Moreover, the university is using the equipment in a demonstration during COP26, the 26th UN Climate Change Conference of the Parties in Glasgow, on how 5G can contribute to carbon-neutral living.
Discover how system design, test and measurement is changing and what you need to know to keep pace. Discover how system design, test and measurement is changing and what you need to know to keep pace. RF, RF testing, system design, component testing Discover how system design, test and measurement is changing and what you need to know to keep pace.
01-Oct-2020
CATARC (Tianjin) Automotive Engineering Research Institute Co.,Ltd. selects Rohde & Schwarz to supply full vehicle antenna test (FVAT) systemCATARC (Tianjin) Automotive Engineering Research Institute Co.,Ltd. has selected leading global test and measurement supplier Rohde & Schwarz to supply a full vehicle antenna test (FVAT) system and support services. The system is required to optimize the performance and location of antenna modules, verify compliance with wireless and EMC standards and ensure proper operation of a vehicle’s wireless system. These aspects are essential for the development of emerging technologies such as autonomous driving.
Active, high-impedance probes can be connected to spectrum analyzers, providing a practical and highly precise measurement solution to overcome an otherwise cumbersome RF testing issue. This application note provides information on how to use oscilloscope probes in RF measurements using spectrum analyzers
04-Jul-2023 | AN-No. 1EF116
Measurements on 3GPP UE's according to TS34.121 with CMUgo: Tests with combined Instruments
09-Dec-2008 | AN-No. 1MA130
The video discusses various solutions to significantly reduce the measurement distances in order to achieve a compact test setup for mobile device and base station OTA testing. Over-the-air (OTA) testing for 5G NR devices usually results in high measurement distances – particularly for mmWave frequencies and massive MIMO devices.
Calibration Tool for PESQ Speech Quality Tests
30-Jun-2011 | AN-No. 1GA50