868 Results
This application note illustrates the operation of the OFDM measurement software R&S FSQ-K96. It describes applications, setup, features, settings and results.
17-Oct-2008 | AN-No. 1EF65
27-May-2024
Rohde & Schwarz presents its solutions for next generation wide bandgap device test and debug at PCIM EuropeRohde & Schwarz will showcase its latest solutions for power electronics testing at PCIM Europe in Nuremberg, addressing challenges of testing and debugging the next generation of wide bandgap semiconductors in power electronic converters.
Differential measurements with Spectrum Analyzers and Probes
28-Jun-2013 | AN-No. 1EF84
This application note provides basic information about the concept of a group delay measurement with spectrum analyzers and signal generators, and how this method simplifies the test setup and improves the measurement speed
09-Aug-2017 | AN-No. 1EF98
A brief overview on measurement preparation for radome testing with the R&S®QAR. A brief overview on measurement preparation for radome testing with the R&S®QAR. QAR, radome testing, measurement preparation, qar applications, radar development Get a brief overview on measurement preparation for radome testing with the R&S®QAR.
30-May-2023
Rohde & Schwarz and IEMN collaborate on 6G THz by bringing together electronic and photonic technologiesThe Institute of Electronics, Microelectronics and Nanotechnology (IEMN, Lille, France) and Rohde & Schwarz have expanded their collaboration to research THz communications that utilize photonic technologies. In a recent demonstration, IEMN reached a milestone when researchers achieved generated a 300 GHz bidirectional link over an outdoor distance of 645 m for use in future 6G backhauling scenarios. The R&S SMA100B microwave signal generator from Rohde & Schwarz was a crucial component in the performance test setup. The R&S SMA100B provides an ultra-low phase noise signal that helps accelerate THz communications research and development to ready it for industrialization.
06-Feb-2024
Rohde & Schwarz presents its Wi-Fi 7 multi-channel single-box test solutions for R&D and production at MWC 2024At MWC 2024, Rohde & Schwarz will showcase its latest Wi-Fi 7 test solutions for R&D and production to meet the ever-increasing test challenges posed by the technology and the parallel operation with LTE and 5G cellular standards.
This application note explains battery life tests using RT-ZVC in combination with CMWrun and CMW500, including example applications.
17-Feb-2017 | AN-No. 1MA281
This includes measurement clusters, reflection & transmission, traceability and test speed.
P25 and FRMCS scanning
Mission-critical networks currently in migration from narrowband to broadband play a crucial role in enabling communication for various public safety agencies
12-Mar-2024 | AN-No. 8NT12
How to perform actual measurement with the R&S®QAR. How to perform actual measurement with the R&S®QAR. QAR, radome testing, actual measurement, qar applications, radar development Learn how to perform actual measurement with the R&S®QAR for automotive radar testing.
R&S®QAR - How to interpret reflection measurement results. R&S®QAR - How to interpret reflection measurement results. QAR, radome testing, Interpretation of reflection measurement , qar applications, radar development R&S®QAR for automotive radar testing - learn how to interpret reflection measurement results.
Measurements on CD Players using the Audio Analyzers UPL or UPD and the Audio Test Disc UPA-CD
16-Feb-1998 | AN-No. 1GA21
03-May-2022
Rohde & Schwarz enhances its digital training offerings through acquisition of The Technology AcademyBy integrating online training specialist The Technology Academy into the Rohde & Schwarz technology group, the T&M specialist takes its customer trainings further into the digital domain. Technology professionals worldwide get easy access to an extensive library of high-quality online courses in the fields of RF, wireless and microwave engineering technology, straight from industry experts.
31-May-2021
Rohde & Schwarz and Colby Instruments collaborate to offer accurate test solution for UWB device localizationUltra-wideband (UWB) technology relies on the ability of devices to determine their location based on distance, moving direction and relative position to other devices. To meet the UWB ecosystem’s testing needs, Rohde & Schwarz and Colby Instruments have collaborated to offer a concerted test solution that accurately simulates the moving direction of UWB devices.
application program for battery model generation from discharge data
21-Nov-2022 | AN-No. 1GP136
15-May-2023
Rohde & Schwarz Interactivity Test solution enables new ITU network performance evaluation recommendationIn 2019, Rohde & Schwarz introduced the Interactivity Test to help mobile network operators meet the needs of real-time and interactive applications in 5G networks. ITU has recently approved the methodology as standardized test procedure, defined in Recommendation ITU-T G.1051.
QAR, radome testing, Interpretation of transmission measurement, qar applications, radar development A closer look on captured data with the R&S®QAR for automotive radar testing.
05-Jun-2024
Rohde & Schwarz approved by USB-IF for USB 3.2 Gen 1 & Gen 2 transmitter and receiver compliance testingThe USB-IF has approved the USB 3.2 compliance test solution from Rohde & Schwarz, confirming that it meets the stringent requirements set by the standardization body. Manufacturers of USB devices can have full confidence in the accuracy and reliability of the test results produced by the test solution.
Manual, ESRP, EMI Test Receiver
This application note describes a technique to perform a calibrated noise power measurement (P_hot) with spectrum analyzers and noise sources.
31-May-2022 | AN-No. 1EF113
I am using EMC32 with EMI Auto Test EMC32-K10 and Test Receiver ESCI. The issue is I cannot perform final measurements with the detector CISPR AV.
Software tool for fast and repeatable optimization of signal analyzer RF front-end settings
The signal conditioning in the RF front-end of signal analyzers is crucial to achieve the best performance with respect to image-suppression, noise-floor, dynamic range and other RF-key parameters.Precise signal levelling is especially important for complex measurements like Error-Vector-Magnitude (EVM). To minimize the measurement uncertainty from test system contributions over a wide range of different levels, the RF front-end needs to be adapted continuously according to the signal characteristics, signal power and frequency - ideally using an automatic levelling algorithm.This document describes the approach of a waveform specific, on-site characterization of the signal analyzer: For each waveform and frequency of interest, the instrument is evaluated in a first step. With this additional data, a fast and repeatable auto-levelling can be performed during the actual measurement.
24-Jan-2022 | AN-No. 1EF111
Measurement methods and solutions for signal integrity of PCB transmission lines, cables and connectors conclude this theme. Video, Oscilloscope, Debugging high-speed designs We discuss key test challenges and present methods and tools for debugging digital designs including high-speed interfaces with a data rate of up to 5 Gbps.
Effective Test Procedures for Installing and Maintaining RF Transmitter Sites
31-Jan-2003 | AN-No. 1EF50
In this webinar, you will learn: How to setup the BTC (Broadcast Test Center) for FM signal generation according to EN 303 345 How to perform Quasi peak audio measurements for FM signals according to EN 303 345 Broadcast Test Center, EN 303 345, Quasi Peak audio measurement, EN 303 345 In this webinar, you will learn how to setup the BTC (Broadcast Test Center) for FM signal generation according to
25-Jan-2024
Rohde & Schwarz at MWC 2024: T&M solutions for the mobile industry that enable connection and empower innovationRohde & Schwarz will showcase at MWC Barcelona 2024 under the motto “Enabling Connections, Empowering Innovations” a wide-ranging portfolio that helps industry leaders, manufacturers and visionaries turn their ideas for new mobile products, applications and technologies into reality.
EMI Test Receiver R&S®ESPI3 and R&S®ESPI7
This application note aims to explain test procedures and characterization of the relevant parameters for active phased array antennas.
04-Jul-2016 | AN-No. 1MA248
23-May-2024
Rohde & Schwarz extends ultra-wideband RF amplifier rangeDesigned for test environments, the BBA300 amplifier offers up to 450 W RF saturation power at the output, at frequencies from 380 MHz to 6 GHz.