2656 Results
R&S NRT Power Reflection Meter Family - Product Brochure
R&S MR6000A VHF/UHF transceiver for ATC and secure airborne communications - Flyer
External frontends (FEs) extend the frequency range of the R&S®RTP high-performance oscilloscope. The basic functionality of an FE is similar to a spectrum analyzer. Depending on the selected radio frequency (RF), an intermediate frequency (IF) is transmitted to the oscilloscope. These frequencies are typically centered roughly at 5 GHz or 10 GHz.
R&S®PR200便携式监测接收机经过精心设计,为频谱监测、干扰查找和现场测试提供有效支持。它能够可靠地探测、分析和定位8 kHz至8 GHz范围内的信号。它针对现场操作进行了优化,完善地平衡射频性能和可操作性,并提供广泛的测量功能,可用于5G信号等复杂的信号。
New direction finders cope with next generation signals - Reference Card
R&S®ADD557SR测向和监测天线系统的频率范围介于20 MHz至6 GHz(测向)和20 MHz至8.5 GHz(监测),并支持垂直和水平极化,适用于固定、移动和可搬移式应用。系统还集成有全向监测天线并支持两种极化方式(可切换)。
R&TTE directive 1999/5/EC radio equipment directive (RED) 2014/53/EU
R&S DST200 RF Diagnostic Chamber - Product Brochure
R&S®FE50DTR External Frontend 36 GHz to 50 GHz - Product Brochure
The R&S®FE50DTR external frontend can extend the frequency range up to 50 GHz for Rohde & Schwarz signal and spectrum analyzers as well as signal generators. The R&S®FE50DTR enables signal up and downconversion directly at the device under test (DUT), lowering cable losses, increasing sensitivity and delivering more power at the antenna in an OTA environment.
R&S DDF1GTX High-Speed Scanning HF Direction Finder - Product Brochure
Venice 4K, Clipster, SpycerBox Ultra TL, Headend AVHE100, Sky
The R&S®FE44S external frontend can extend the frequency range up to 44 GHz for Rohde & Schwarz signal and spectrum analyzers as well as signal generators. The R&S®FE44S enables signal up and downconversion directly at the device under test (DUT), lowering cable losses, increasing sensitivity and delivering more power at the antenna in an OTA environment.
R&S EM200 Digital Compact Receiver - Product Brochure
R&S®TLV9 | R&S®TLU9 Low-Power VHF/UHF Transmitter and GapFiller Family - Product Brochure
The R&S®ESMW ultra wideband monitoring receiver is the perfect solution to address future trends and challenges in spectrum monitoring. It covers the wide frequency range of 8 kHz to 40 GHz with an outstand-ing real-time bandwidth of up to 2 GHz. In combination with Rohde & Schwarz single-channel direction find-ing (DF) antennas, it supports angle of arrival (AoA) direction finding from 300 kHz to 8.5 GHz.
With 1 GHz of analysis bandwidth, outstanding phase noise of < –127 dBc (1 Hz) at 10 kHz offset and a high dynamic range, the R&S®FSVA3000 signal and spectrum analyzer has everything it takes to master demanding measurement applications such as 5G NR measurements. Offering high measurement speed and an advanced operating concept, it is the right instrument for challenging signal analysis tasks both in the lab and in production.
The R&S®ESME wideband monitoring receiver is ideal for high-performance ITU-compliant spectrum monitoring, signal analysis and multichannel digital data streaming from 8 kHz to 40 GHz. In combination with Rohde & Schwarz single-channel direction finding (DF) antennas, it optionally supports angle of arrival (AOA) direction finding from 300 kHz to 8.2 GHz. Thanks to its exceptional RF performance, the R&S®ESME provides cutting-edge signal detection and measurement capabilities even in high-density spectrum environments.
Thailand’s NBTC relies on R&S ARGUS spectrum monitoring system - Reference Card
The most important features for accurate and uncomplicated power measurements are top measurement accuracy and speed as well as simple operation on a base unit or a laptop/PC. The R&S®NRP power meter family combines all these characteristics in the R&S®NRX base unit, R&S®NRPV virtual power meter PC software and a comprehensive portfolio of LAN and USB power sensors. The R&S®NRP family is ideal for use in production, R&D and calibration labs as well as for installation and maintenance tasks.
The R&S®FU129 antenna filter unit is placed close to the receiving antennas. It comes with an antenna input selector for remote controlled switching of up to six antenna inputs to one output. Unwanted signals, such as those caused by nearby mobile base stations or strong sound and TV broadcast transmitters, can be reduced to levels suitable for the connected receiver by applying optional filters. Both strong useful signals and interfering signals can be suppressed.
De plus en plus d'appareils partageront le spectre radio dans les années à venir. Le R&S®ESMW aide les régulateurs à suivre le rythme. Le récepteur de radio-surveillance ultra large bande dédié aux fréquences jusqu'à 40 GHz est parfaitement adapté aux installations fixes, aux mesures sur les véhicules et les systèmes transportables. Il propose une bande passante temps réel de 125 MHz et des extensions optionnelles jusqu'à 2 GHz.
The only military airborne radio that meets civil aviation certification requirements.
Le R&S®QPS est un scanner de sûreté innovant à ondes millimétriques. Il détecte automatiquement tous les objets (métalliques ou non‑métalliques) potentiellement dangereux et dissimulés dans les vêtements ou à même le corps. Le scanner est utilisé pour les contrôles de sécurité dans les aéroports, pour la protection de la propriété intellectuelle, pour la sécurité des événements publics présentant une menace potentiellement élevée et pour le contrôle d'accès aux installations sécurisées.
EMC test solutions on the cutting edge - White Paper