8203 Results
Rohde & Schwarz signal and spectrum analyzers accurately measure the noise figure in the millimeterwave frequency range using the Y-factor method.
17-Jul-2017
Reproducible receiver tests under car-to-car fading conditions
06-Nov-2017
Connecting simulation and measurements on physical devices
This application note is based on collaborative work between MathWorks® and Rohde & Schwarz. The focus is on linearization of a non-linear device, in our case the RF power amplifier.
05-Aug-2021 | AN-No. 1SL371
Measurement of the phase difference between the MIMO layers is a challenging task in the design of 5G base stations. However, this measurement and its analysis can be easily accomplished using the R&S®NRQ6 frequency selective power sensor and R&S®VSE signal explorer software.
14-Jan-2022
Calibrating the CMD Output Level for BER
10-Mar-2000 | AN-No. 1MA24
Rohde & Schwarz Realtime deembedding with the R&S®RTP
25-Sep-2018
ACP Measurement according to IS 54 (NADC) using the FSE Spectrum Analyzers
17-Jan-2002 | AN-No. 1EF32
Reference factor between RF (referenced to sync top level) and VF
20-Jul-2001 | AN-No. 7BM10
Linking EDA design simulation and hardware testing to enable an easy, straightforward process flow and first-pass design.
16-Aug-2021
Trace minimum hold function and utilize better visualization of persistent interferers with the R&S®MNT100, R&S®PR200, R&S®PR100 and R&S®DDF007.
15-Jul-2019
Signal generators and signal analyzers help open up the Wi-Fi 7 signal world and allow initial component and module testing for this new standard.
30-May-2022
The R&S®SMW200A GNSS simulator offers an easy and convenient way to test your receiver design against a wide variety of potential interferers and jammers.
28-Jan-2019
The R&S®Pulse Sequencer software offers an easy way to simulate moving radar emitters and a moving receiver for EW receiver tests.The software together with the R&S®SMW200A vector signal generator is a powerful radar simulator
18-Sep-2018
Define the exact current profile to minimize your electronics device´s power consumption with the R&S®NGM200 power supply series.
10-Dec-2020
Tamper protection for monitoring networks in banks
07-Jul-2014
Converting MediaFLO™ Waveform Files to R&S<sup>®</sup> SFU / SFE / SFE100 ARB Format Using IQWIZARD/WinIQSIM™ for R&S<sup>®</sup> SFx-K35 ARB
10-Nov-2008 | AN-No. 7BM73
Transient Measurements on GSM/PCN Synthesizers
03-Jun-1998 | AN-No. 1EF08
An automated test solution based on the R&S®CMW wideband radio communication tester fully supports the new test cases for real-time submeter positioning.
10-Jun-2022
Simulation of BCCH Channel of GSM/PCN Base Station with Signal Generator SME
01-Jul-1999 | AN-No. 1GPAN14
Power Measurement and Power Calculation of IEEE 802.16 WiMAX OFDMA signals
11-Jul-2007 | AN-No. 1EF60
Rohde & Schwarz offers RF solid-state amplifiers for various frequencies ranging from 9 kHz to 6 GHz and delivering CW power up to 80 kW.
27-Apr-2016
DVB-T signal quality is determined by measuring the modulation error ratio (MER). However, a poor MER does not indicate its causes since different interference factors overlap at the transmitter when a signal is generated and transmitted. The R&S®ETL TV test receiver now has a unique new measurement capability that makes it possible to demonstrate to what extent the modulator's phase noise affects the MER.
13-Jul-2012
This application note explains how to connect and interface with the SGMA instruments and gives some recommendations and hints about their use.
15-Oct-2015 | AN-No. 1GP103
Combinational tests for telephone terminal equipment
26-Apr-2006
Demonstration of BER Test with SMIQ or AMIQ and FSP or FSU
06-May-2002 | AN-No. 1MA57
The R&S SFU broadcast test system is used as a reference signal generator to simulate the influence of LTE and other mobile radio signals on digital TV signals and receivers.
20-Jun-2012
CDMA2000<sup>®</sup> 1xRTT and 1xEV-DO Access Probe and Standby Power Measurements with the R&S<sup>®</sup> CMW500
25-May-2012 | AN-No. 1CM99