75 Results
28-Mar-2024
Rohde & Schwarz first to show measurements on novel Bluetooth® Channel Sounding signals for positioning accuracyRohde & Schwarz will present the first real-time measurements on the planned new Bluetooth® signals to support Channel Sounding. The demonstration at the embedded world Exhibition & Conference in Nuremberg, Germany, will be run on an R&S CMW500 wideband radio communication tester. The Bluetooth® Channel Sounding feature will enable unprecedented positioning accuracy for consumer and commercial applications. The signal measurement capabilities to support chip and device development are eagerly awaited by the industry.
Bluetooth Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure
26-Mar-2024
embedded world 2024: Rohde & Schwarz presents its cutting-edge test solutions for embedded systemsRohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.
Versatile Software Tool for Rohde & Schwarz Instruments
RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.
24-Dec-2017 | AN-No. 1MA074
23-May-2024
Rohde & Schwarz extends ultra-wideband RF amplifier rangeDesigned for test environments, the BBA300 amplifier offers up to 450 W RF saturation power at the output, at frequencies from 380 MHz to 6 GHz.
Rohde & Schwarz Operating Manual for the Bluetooth®Enhanced Data Rate and Bluetooth®5.0 application of the signal generator; option R&S®SMBV-K60, SMBV-K117
Rohde & Schwarz User Manual for the Bluetooth® application of the signal generator R&S®SMW200A; options R&S®SMW-K60, R&S®SMW-K117, R&S®SMW-K178.
Rohde & Schwarz User Manual for the Bluetooth®EDR application of the signal generator R&S®SMM100A; options R&S®SMM-K60, R&S®SMM-K117, R&S®SMM-K178.
Rohde & Schwarz user manual for the Bluetooth®EDR application of the R&S®SMBV100B; options R&S®SMBVB-K60, R&S®SMBVB-K117.
In this video, we make a short tour on the technology evolution of Bluetooth LE to Bluetooth 5 to address the IoT market beyond wearables, PC peripherals and audio equipment. In this video, we make a short tour on the technology evolution of Bluetooth LE to Bluetooth 5 to address the IoT market beyond wearables, PC peripherals and audio equipment.
Setting a CMW as a Bluetooth LE packet Generator
CMWrun Settings for external Interfer usage in Bluetooth LE Test Plans.
Analyze correlations between WLAN and Bluetooth
The R&S CMW platform covers all test cases defined by Bluetooth SIG. The video demonstrates Bluetooth 5 measurements using the R&S CMW270 wireless connectivity tester.
To ensure connectivity and trouble-free operation, each Bluetooth® enabled device has to be tested for conformance with Bluetooth SIG standards and regulatory requirements.
23-Nov-2017
R&S®FSV-K8 Bluetooth Measurements Operating Manual
Rohde Schwarz, R&S, Let’s talk IoT, IoT, Bluetooth LE, BLE testing, Bluetooth LE test mode, BT BER test This video explains different way of testing Bluetooth® Low Energy. The BLE test mode supports all tests in direct test mode (DTM) without the need of a control cable.
Bluetooth Reciver Intermodulaton- and Blocking Performance tests fail with every DUT when using an external signal generator to generate the interferer signals.
Video, Application video, Product video CMW500, CMW Platform, CMW270, CMW290, Bluetooth, Low Energy, Bluetooth LE measurement This video shows how to measure Bluetooth Low Energy (LE) devices with the R&S®CMW test platform
This document describes Bluetooth Low Energy RF over-the-air RX and TX measurements using advertising channels for communication with Bluetooth Low Energy devices.
14-Dec-2020 | AN-No. 1C109
Only the R&S®CMW testers allow developers to perform RF signaling tests on Bluetooth LE devices without any control cable using over-the-air measurements. This method permits detailed analysis of RF characteristics and transitions between NB-IoT Release 14 and Bluetooth.
Bluetooth® Low Energy channel sounding validation
06-Sep-2023
Rohde & Schwarz User Manual for R&S®FSV-K8 Bluetooth measurement application; Describes the specific functions of the application, including the remote control commands with programming examples.
This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5.
19-Jun-2017 | AN-No. 1MA282
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
Transmitter and Receiver Measurements on Bluetooth Modules with CMU200
06-Aug-2001 | AN-No. 1MA46
Rohde & Schwarz user manual for the R&S®FSW-K8 Bluetooth application; provides all the information specific to the application. All general instrument functions and settings common to all applications are described in the main R&S FSW user manual.
Rohde & Schwarz user manual for the R&S®FSV3-K8 Bluetooth application; provides all the information specific to the application. All general instrument functions and settings common to all applications are described in the main R&S FSV3000 user manual.
This document describes the adaptive frequency hopping mechanism for improved signaling performance in Bluetooth Basic Rate and Enhanced Data Rate devices.The R&S CMW provides this feature for remote operation in TX, Loopback and Connection test mode. Thereby the R&S CMW acts as a master, while the Equipment under Test (EUT) represents the slave(s) of the piconet.
14-Dec-2016 | AN-No. 1C108