Key facts
- Addresses high-speed probing challenges
- Flexible and configurable connectivity
- MultiMode functionality for switching between measurement modes
- Integrated high precision voltmeter
- Integrated micro button for convenient instrument control
Key facts
The R&S®RT-ZM modular probe system addresses today’s probing requirements with a technically sophisticated, yet easy-to-handle solution. The various probing solutions meet the demands for high probing bandwidth and dynamic range in conjunction with the need for low capacitive load. The R&S®RT-ZM probe system includes probe tip modules for various measurement tasks and conditions. The probe tip modules can be connected to amplifier modules with bandwidths ranging from 1.5 GHz to 16 GHz.
The R&S®RT-ZM modular probe system delivers high performance in combination with flexible and configurable connectivity. The R&S®RT-ZM probe system includes probe tip modules for various measurement tasks and conditions.
The multimode functionality allows users to switch between single-ended, differential and common mode measurements without reconnecting or resoldering the probe tip. The multimode functionality is implemented on the company-designed, high-speed R&S®RT-ZM amplifier ASIC.
The R&S®RT-ZM modular probe system offers a unique offset compensation range of ±16 V. The DC components of a measured signal can be compensated at the probe tip, upstream of the differential R&S®RT-ZM amplifier ASIC. The benefit of this approach is that the operating voltage window is extended beyond the dynamic range of the probe amplifier module and the signal components of interest can be displayed on the oscilloscope with maximum resolution. The feature is also available in multimode operation.
The integrated and unique R&S®ProbeMeter operates independently from the oscilloscope and measures the DC component of a signal with an accuracy of 0.05 %. The DC measurement is performed continuously and in parallel with the waveform aquisition of the oscilloscope. The high precision is achieved through immediate digitization of the measured DC voltage with a dedicated ADC inside the R&S®RT-ZM probe amplifier module.
The R&S®RT-ZM probe amplifier module comes with an integrated micro button that allows users to stay focused on their measurement tasks and conveniently operate their oscilloscopes. The micro button can be configured on Rohde & Schwarz oscilloscopes to perform a variety of functions, such as run/stop, auto set, save waveform, find trigger level, and create automated test report. Multimode switching can also be configured for the R&S®RT-ZM modular probe system.
Order number 1419.4301.02
Solder-in probe tip cable for R&S®RT-ZM modular probe system
> 16 GHz, < 28 ps, probe tip module, P/N/DM/CM
Order number 1801.4349.02
Set 6x solder-in probe tip cable for R&S®RT-ZM modular probe system
>16 GHz, < 28 ps, probe tip module, P/N/DM/CM
Order number 1419.4318.02
Solder-in probe tip cable with ext. temp. range for R&S®RT-ZM modular probe system
> 16 GHz, < 28 ps, probe tip module, P/N/DM/CM
Order number 1419.4324.02
Square-pin probe tip module for R&S®RT-ZM modular probe system
> 6 GHz, < 75 ps, probe tip module, P/N/DM/CM
Order number 1338.1010.02
Flex connect solder-in probe tip module for R&S®RT-ZM modular probe system
>16 GHz, <28 ps, probe tip module, P/N/DM/CM, incl. 10 solder-in flex connect tips
Order number 1419.4224.02
Quick connect probe tip module for R&S®RT-ZM modular probe system
> 12 GHz, < 37 ps, probe tip module, P/N/DM/CM
Order number 1419.4353.02
Browser module for R&S®RT-ZM modular probe system
> 16 GHz, < 28 ps, probe tip module, DM
Order number 1419.4201.02
SMA module for R&S®RT-ZM modular probe system
> 16 GHz, < 28 ps, probe tip module, P/N/DM/CM
Order number 1419.4218.02
Temperature kit for R&S®RT-ZM modular probe system
> 12 GHz, < 37 ps, probe tip module, P/N/DM/CM
Order number 1419.3911.02
Storage case for up to 6 R&S®RT-ZMA1x tip cables
Order number 1419.3928.02
Calibration in line with ISO 17025 and ISO 9000
DAkkS (formerly DKD) calibration in line with ISO 17025 and ISO 9000 for R&S®RT-ZMxx modular probe amplifier (order only with device)
Order number 1326.3641.02
3D probe positioner
3D positionier with central tensioning knob for easy clamping and positioning of probes (span width: 200 mm, clamping range: 15 mm)
Related products