1108 Results
This application note describes remote operation or monitoring of the R&S® RTO digital oscilloscope through a standard web browser. The common cross-platform technology Virtual Network Computing (VNC) is used as a server on the instrument.
27-Jul-2010 | AN-No. 1ER01
A single instrument, the R&S®ETL TV analyzer, performs all required DVB-T / DVB-H transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.
13-May-2013 | AN-No. 7BM101
Synchronization of the datarate of TV Test Transmitter SFQ with an external clock
01-Aug-1997 | AN-No. 7BM39
Learn more about the world’s first fully electronically steerable antenna array.
27-Jun-2023
In this application note, a UHD 4K end-to-end solution utilizing products from Rohde & Schwarz is described in detail from the point at which 4K content is captured until its delivery to households via a DVB-T2 SFN network.
29-Aug-2014 | AN-No. 7BM90
This application note shows how to determine the quality of a video streamed by an LTE mobile with R&S®CMW500 Radio Communication Tester and R&S®VTE Video Analyzer.
08-Sep-2014 | AN-No. 1MA253
This article describes the installation and use of R&S®VENICE DVS for producing and ingesting files for production.
18-Nov-2014
The R&S®CMW500 and the R&S®CMX500 are the perfect tools for assessing the funtionality and performance of 5G voice over new radio (VoNR) services.
30-Jun-2021
Experimental Study of 3G Signal Interaction in Nonlinear Downlink RAN Transmitters
03-Nov-2006 | AN-No. 1MA110
This document describes various methods to achieve optimized performance for such measurements. The availability of the methods depends on the CMW500 version.
17-Jul-2012 | AN-No. 1CM100
This application note describes the possibilities to measure LTE MIMO with the LTE-Software R&S®FS-K102/K103PC in combination with an R&S®RTO1044 oscilloscope.
24-Apr-2013 | AN-No. 1EF86
This application note describes how to configure the signal source analyzer R&S FSUP for highest dynamic range phase noise measurement in the microwave frequency range up to 50 GHz.
18-Feb-2009 | AN-No. 1EF68
Integration of DTV Recorder Generator DVRG into a TCP/IP Network
24-Jan-2002 | AN-No. 7BM07
RF Transient Analysis SoftwareThis application note describes a software application that can be utilized in conjunction with Rohde&Schwarz Signal- and Spectrum Analyzers and Signal Source Analyzers to capture and analyze transient signals.
16-Feb-2009 | AN-No. 1MA141
The SFU200A and SFE100 can be used to simulate the performance of many different types of receivers in the SFU200A and SFE100. This paper describes how to use these tools to simulate a correlated receiver using R&S®SFU.
19-Oct-2012 | AN-No. 7BM76
R&S NRPView - PC Software for R&S NRP-Zxx Sensors
18-Dec-2008 | AN-No. 1MA77
Remote control over a public mobile phone network with SMS or via a wireless IP connection.
22-Apr-2013
Getting started with IQ Streaming Application
The intention of this Application Note is to provide an overview of all necessary tasks for getting along with successful IQ Streaming.The necessary technical requirements are described as well as the streaming parameters of the IQ data stream.The general operation and basic setup of the MSR4 is described in the user manual and is not part of this document.
28-Mar-2023 | AN-No. 1179.7104.02
The measurement of error vector magnitude (EVM) is relative – but what is the reference?
02-Mar-2020
Simulation of DVB-T Channel for Antenna Diversity Reception
31-Jul-2003 | AN-No. 7BM06
This application note describes how performance tests can be performed quickly and easily by using vector signal generators from Rohde & Schwarz.
04-Mar-2015 | AN-No. 1MA78
Storing and Loading Complete Test Receiver Data Records via IEC/IEEE-Bus
18-Jan-2002 | AN-No. 1EE20
This white paper describes the interaction between intermodulation products generated by a device under test (DUT) and intermodulation products generated internally in a spectrum analyzer.
29-Nov-2012 | AN-No. 1MA219
Speeding up production test with the R&S<sup>®</sup> SMATE200A
17-Apr-2007 | AN-No. 1GP63
What is a decibel and how should we use it in our calculations? This Application Note is intended as a refresher on the subject of decibels.
21-Apr-2015 | AN-No. 1MA98
This application note describes in detail the steps required to make a noise figure measurement on a spectrum analyzer using the “Y Factor” technique. Background equations are presented for each step of the calculation.
25-Jul-2012 | AN-No. 1MA178
Rohde & Schwarz offers unique one-box solutions for reliable testing of air navigation systems such as ILS, VOR and DME.
04-Nov-2010
The R&S EX-IQ-Box serves as a digital baseband interface between a device under test (DUT) and Rohde & Schwarz generators, analyzers and radio communication testers.
23-May-2012 | AN-No. 1MA168
Signals produced by SAF and SFF - Standard BG/PAL and N/PAL
20-Jul-2001 | AN-No. 7BM25