1108 Results
This application note focuses on functional testing and debugging of HDMI interfaces using the R&S®VTC/VTE/VTS. It explains how these instruments can be used to assess the HDCP implementation, the ARC or the CEC functionality.
04-Jun-2014 | AN-No. 7BM85
Reproducable Noise Figure Measurement Using the Shielded Box ZA-SB10
16-Oct-2002 | AN-No. RSH01
Remote Usage of STREAM EXPLORER via Ethernet Network
31-Mar-1999 | AN-No. 7BM01
This application note focuses on coaxial connectors found in RF and microwave applications, providing general information on the available types.
09-Apr-2015 | AN-No. 1MA99
C/N Ratio at Low Carrier Frequencies in SFQ
20-Jul-2001 | AN-No. 7BM09
This Application Note focuses on measurement of harmonics using modern spectrum analyzers. It highlights the source of harmonics before focusing on their measurement using a spectrum analyzer.
02-Mar-2012 | AN-No. 1EF78
Automatic DAB Receiver Test - Test of Re-Synchronisation Capability
11-Nov-2005 | AN-No. FTK04
This application note presents the Jitter analysis capabilities of the R&S®RTO for digital signals. It demonstrates the basic operation with an application example, and shows the associated jitter analysis.
29-Aug-2013 | AN-No. 1TD03
This application note describes remote operation or monitoring of the real time spectrum analyzer R&S® FSVR through a standard web browser. The common cross-platform technology Virtual Network Computing (VNC) is used as a server on the instrument.
27-Jul-2010 | AN-No. 1EF74
This application note gives a short summary on the Allan variance as a measure of frequency stability and an example on how to calculate it, with measurement results from R&S spectrum analyzers.
11-Feb-2009 | AN-No. 1EF69
The patent-pending testing solution R&S ® DATA-NPT is a very compact and resource-saving implementation of a new measurement procedure that simultaneously measures the maximum data capacity and the minimum continuous connectivity in a mobile network.
21-Apr-2016
LTE Release 9 Technology Introduction - White Paper
19-Dec-2011 | AN-No. 1MA191
This Application Note presents Test & Measurement equipment for the broadcast and mobile radio sector and discusses some possible test setups.
08-Dec-2011 | AN-No. 1MA176
Loudspeaker measurements with Audio Analyzers UPD or UPL
04-Jun-1998 | AN-No. 1GA16
The LTE technology as specified within 3GPP Release 8 was first commercially deployed by end 2009.
09-Jul-2013 | AN-No. 1MA232
Next-Generation (3G/4G) Voice Quality Testing with POLQA®
30-May-2012 | AN-No. 1MA202
This application note along with its corresponding white paper 1MA207 show how to use the R&S radar product portfolio to tackle test and measurement tasks in modern radar technology.
10-Aug-2012 | AN-No. 1MA127
White PaperThis white paper summarizes significant additional technology components based on LTE, which are included in 3GPP Release 12 specifications.
04-Aug-2015 | AN-No. 1MA252
This paper will provide an overview of the current status of the ITS worldwide with a focus on the IEEE 802.11p PHY. Additionally, the paper provides information on test and measurement solutions for devices and components used in ITS.
23-Jan-2014 | AN-No. 1MA152
This whitepaper provides an overview of the WLAN offload in LTE as standardized by 3GPP, as well as the enhancements for Wi-Fi standardized by IEEE and the Wi-Fi Alliance. It also describes access methods in the joint network, treats the security, and describes IP mobility. In addition network discovery and selection are explained.
10-Dec-2012 | AN-No. 1MA214
Automatic DAB Receiver Test - Test of Sensitivity
11-Nov-2005 | AN-No. FTK03
This application note introduces the working principles of a conventional trigger system and explains the advantages of the real-time capable digital trigger of the RTO oscilloscopes.
11-Apr-2012 | AN-No. 1ER04
This application note explains how to perform LTE base station measurements over the air (OTA) using the R&S®FSH4/8/13/20 handheld spectrum analyzer.
12-Sep-2013 | AN-No. 1EF87
This document describes the typical measurements performed on mixers and how they can be implemented on the ZVA Vector Network Analyzer with the ZVA-K4 Frequency Conversion option.
06-May-2009 | AN-No. 1EZ58
This application notes introduces the Multi-Standard Radio Analyzer function of the R&S®FSW and shows how it performs the measurement on multi-standard radio transmitters.
17-Jul-2012 | AN-No. 1EF83
This application note introduces the concept of multistandard radio base stations as well as solutions for transmitter and receiver tests based on Rohde & Schwarz signal generators and Rohde & Schwarz signal and spectrum analyzers.
06-Jul-2012 | AN-No. 1MA198
This application note shows how to configure, calibrate and perform conducted EMS measurements according to IEC / EN 61000-4-6 and EMI measurements according to CISPR 16-2-1 with the R&S®EMC32 software tool.
19-Jul-2013 | AN-No. 1MA212
Binary transfer with remote instruments, like the KPI-1200 Series of remote instruments. Learn about the various methods of remote binary transfer, like the KPI-1200, X-20 Series and KPI-2100 Series of instruments in this article.
31-Mar-2022 | AN-No. 1SL381
This paper describes the Pulsed RF Calculator that suggests spectrum analyzer settings to calculate pulse desensitization.
24-Sep-2015 | AN-No. 1MA240