8457 Results
Apple iPad Remote Control for Broadcasting T&M Instruments
02-Oct-2012 | AN-No. 7BM82
Simultaneous DL throughput verification and UL transmission testing with the R&S®CMW500
29-Jul-2009
Generating and Analyzing 3 GPP Multicarrier Signals with High Dynamic Range
17-Feb-2005 | AN-No. 1MA48
Introduction to Attribute Based Instrument Drivers
01-Dec-2012 | AN-No. 1MA170
This application note provides a brief introduction into the capabilities of the Rohde & Schwarz Vector Signal Generators (VSG) to create user defined digitally modulated signals called Custom Digital Modulation (CDM).
24-Jul-2017 | AN-No. 1GP96
This application note describes different measurement techniques and methods for an automotive lighting module based on a hybrid controller design.
08-Jun-2020 | AN-No. GFM339
Balanced Reflection Measurement with R&S ZVL
14-Feb-2008 | AN-No. RSI05
The R&S®SMW200A vector signal generator is ideal for high-precision RF and microwave tests requiring deembedding of the device under test (DUT).
11-Oct-2017
The R&S®RTE is the best choice for analyzing small signals such as ECG signals with high signal fidelity.
17-Nov-2015
The R&S®ZNL is an economic solution that can characterize a variety of DUTs both via network analysis and spectrum analysis without requiring a lengthy setup.
17-Dec-2021
Generate OneWebcompliant signals for receiver tests
24-Apr-2018
Combination test Expanded test method for optocouplers
17-Jul-2006
WCDMA RF Measurements with the R&S<sup>®</sup>CMW500 according to 3GPP TS 34.121
16-Dec-2011 | AN-No. 1CM95
The R&S®RTM3000 and R&S®RTA4000 offer pulse width modulation (PWM) track analysis functionality, which is a great feature for verifying and optimizing soft start.
09-Jul-2019
Measurement of Clicks on Audio Lines using the Audio Analyzers UPL or UPD
04-Jun-1998 | AN-No. 1GA31
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
Learn more about the R&S®SFC and how it supports all conventional digital and analog TV and audio broadcast standards.
19-Feb-2015
Test, calibrate and verify automotive radar sensors with the R&S®ATS1500C antenna test system and the R&S®AREG100A radar echo generator.
13-Jan-2020
This Application Note gives a short overview how signals with two different modulation schemes can be analyzed using the R&S®FSW.
18-Apr-2016 | AN-No. 1EF93
The R&S ® EDST300 efficiently and precisely analyzes TACAN and DME ground stations, making it ideal for commissioning and regular maintenance.
16-Feb-2017
Automatic monitoring of radio signals interfering with sensitive devices in hospitals
04-Sep-2006
GSM Measurements with the R&S CMU200 and CMUgo
24-May-2005 | AN-No. 1CM57
This application note addresses the diverse possibilities of interoperability between Rohde & Schwarz power sensors and Rohde & Schwarz signal generators. All current and many legacy Rohde & Schwarz signal generators offer the capability of directly connecting power sensors. This enables power measurements without the need of a base unit or separate PC to display the readings. Furthermore, sensors can be used for special tasks like filling a user correction table or continuously controlling levels at crucial points in the measurement configuration.
31-Aug-2023 | AN-No. 1GP141
To generate a full channel load, as necessary for DVB-C2 receiver tests for example, only two Rohde & Schwarz instruments, the R&S BTC and R&S CLG, are necessary.
30-Jul-2013 | AN-No. 7BM88
The R&S®QAR50 is the ideal tool to characterize the material properties of polymers and their influence on the quality of the radar signal at an early design stage and in quality control of material development.
24-Jun-2022
Heinz Mellein, Manuel Mielkech 8NT01 MIMO Channel,Field Measurements,MIMO Evaluation,R&STSMx,R&SROMES Assessing a MIMO Channel Heinz Mellein, Manuel Mielkech 8NT01 MIMO Channel,Field Measurements,MIMO Evaluation,R&STSMx,R&SROMES Related products
31-Aug-2017 | AN-No. 8NT01
IQWizard - IQ Signal Measurement and Conversion
26-Apr-2013 | AN-No. 1MA028
Next generation technologies in radar and satellite communication with high data rates call for innovative testing solutions to develop and manufacture RF components like voltage controlled oscillators (VCO). The R&S®FSPN phase noise analyzer increases efficiency and reproducibility of VCO characterization and phase noise measurements from lab to production.Voltage controlled oscillators are oscillators whose output frequency is controlled by means of an external tuning voltage, and they are used in a wide variety of electronic and RF applications like function generators, phase-locked loops including frequency synthesizers used in communication equipment. Different VCO design approaches yield different parameters and performance, and therefore it is important to measure or characterize VCOs under different conditions. This application note provides a short technical introduction to voltage controlled oscillators and explains the most common and the most important measurements made during the VCO characterization process.
17-May-2023 | AN-No. 1SL386
The R&S®FSW signal and spectrum analyzer facilitates swept spectrum analysis of next generation SARs with true preselection, finer range resolution and image rejection.
16-Apr-2021
Importing Data in ARB, Custom Digital Modulation and RF List Mode
22-Dec-2010 | AN-No. 1GP62