Key Facts
The three-in-one vector network analyzer (VNA), spectrum analyzer (SA) and power meter for field and lab excellence
The R&S®ZNL helps reduce investment costs with a unique option concept. The base models support frequencies from 5 kHz to 20 GHz and they can be expanded to include a fully integrated spectrum analyzer and support RF power meters. Furthermore, spectrum analysis supports a CW signal generator option. Instead of investing in multiple instruments, research labs, service centers, universities and production facilities can use a single, compact instrument that offers even higher measurement speeds and better RF performance than dedicated instruments in comparable classes.
Benchtop VNA with a small footprint
The R&S®ZNL combines a vector network analyzer, a spectrum analyzer and a power meter in a single, compact box. The all-in-one instrument is ideal for development, production and service environments with constantly changing test requirements.
Ideal for space saving setups
The R&S®ZNL boasts a compact design with a remarkable footprint that is just 40.8 cm wide, 18.6 cm high and less than 24 cm deep.
Built-in guided user interface wizards
Rohde & Schwarz has manual calibration kits and automatic calibration units for faster and more convenient calibration. Guided user interface wizards for S-parameters and calibration standards on the R&S®ZNL ensure a convenient and hassle-free setup.
Increase efficiency with calibration units
The R&S®ZNL supports both automatic calibration units (R&S®ZN‑ZE1xx) and manual calibration kits (R&S®ZN‑Z1xx), simplifying calibration, while reducing operator errors and improving calibration repeatability
Smart investment
The R&S®ZNL is a highly scalable and versatile vector network analyzer that reduces investment costs and has a unique option concept. It has a variety of functions that can be easily expanded.
Multiview of the R&S®ZNL
The sequencer function toggles between network analyzer measurements and spectrum analyzer measurements.
Unlock the power measurement function in spectrum analyzer mode
The R&S®ZNL with the R&S®FPL1‑K9 option supports an extensive list of external R&S®NRP power sensors. Four power sensors can be connected in parallel to the VNA and precise power measurements performed simultaneously.
Supports 4 power sensors simultaneously
You can flexibly and precisely meet and tailor your measurement preferences and needs.
Battery and DC power supply for field use
The optional battery pack makes the R&S®ZNL a fully portable instrument ideal for field use. The optional 12 V/24 V DC power supply can be used to operate the R&S®ZNL in vehicles. The optional R&S®FPL1-Z2 transport bag protects the instrument against damage and dirt during transport and field deployments. Side vents and a transparent top cover allow portable operation while the instrument remains safely in the bag. A carrying vest holster is also available.
Ideal for both the lab and in the field
The carrying handle and optional battery pack make the R&S®ZNL a fully portable instrument.
Extended power range for R&S®ZNL3
Extends the output power range of R&S®ZNL3 down to -40 dBm.
Extended power range for R&S®ZNL4
Extends the output power range of R&S®ZNL4 down to -40 dBm
Extended power range for R&S®ZNL6
Extends the output power range of R&S®ZNL6 down to -40 dBm
Extended power range for R&S®ZNL14
Extends the output power range of R&S®ZNL14 down to -40 dBm
Extended power range for R&S®ZNL20
Extends the output power range of R&S®ZNL20 down to -40 dBm
Receiver step attenuator for R&S®ZNL3 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL3. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Receiver step attenuator for R&S®ZNL3 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL3. The receiver step attenuator can be set up to 30 dB in 10 dB steps
Receiver step attenuator for R&S®ZNL4 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL4. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Receiver step attenuator for R&S®ZNL4 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL4. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Receiver step attenuator for R&S®ZNL6 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL6. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Receiver step attenuator for R&S®ZNL6 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL6. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Receiver step attenuator for R&S®ZNL14 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL14. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Receiver step attenuator for R&S®ZNL14 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL14. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Receiver step attenuator for R&S®ZNL20 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL20. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Receiver step attenuator for R&S®ZNL20 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL20. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Spectrum analyzer function for R&S®ZNL3
Transforms the R&S®ZNL3 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
Spectrum analyzer function for R&S®ZNL4
Transforms the R&S®ZNL4 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions.
Spectrum analyzer function for R&S®ZNL6
Transforms the R&S®ZNL6 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
Spectrum analyzer function for R&S®ZNL14
Transforms the R&S®ZNL14 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
Spectrum analyzer function for R&S®ZNL20
Transforms the R&S®ZNL20 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
OCXO accurate reference frequency
High precision frequency reference
Additional interfaces
Video out, IF out, noise source control, AUX port, connector for R&S®NRP power sensors
GPIB interface
Additional interface for remote control by GPIB, plug-in unit
YIG preselector bypass
Enables full 40 MHz bandwidth analysis in frequencies up to 26.5 GHz
DC Power supply for 12/24 V supply
Li-Ion battery pack
40 MHz analysis bandwidth
Enables the use of 40 MHz bandwidth for R&S®ZNLx-B1 spectrum analysis option
Additional removable PC board with SSD
Additional removable solid-state disk mounted on PC board, including analyzer firmware
Protective hard cover
Transport bag, transparent cover
Carrying vest holster
Spare battery pack
Rack mount kit (RAL5014 pigeon blue)
Rack mount kit (RAL5000 violet blue)
Smart noise source 10 MHz to 18 GHz
Smart noise source 10 MHz to 26.5 GHz
N(m) adapter for R&S®RT-Zx probes
To connect R&S®RT-Zx probes to spectrum and network analyzers with N(f) connectors; USB connector for power supply and communication
Active single-ended probe, 3 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Active single-ended probe, 6 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface
Active differential probe, 4.5 GHz, Rohde & Schwarz probe interface
Power rail probe, 4 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Time domain analysis
Displays discontinuities, reflection factors or impedance vs. delay/length. Contains step and impulse response, lowpass/bandpass frequency spacing and gated S-param.
Distance-to-fault measurements
Allows detection of cable faults and connectors
AM/FM/PM analog modulation analysis
Modulation analysis for analog (AM, FM, PM) modulated single carrier signals
(for use with the R&S®ZNL, the R&S®ZNLx-B1 is required )
Measurements with R&S®NRP power sensors
Supports R&S®NRP power sensors for power measurements.
(For use with the R&S®ZNL, the R&S®ZNLx-B1 is required )
Independent CW source for spectrum analyzer options
Independent CW source for R&S®ZNL, can be used as stimulus for spectrum analysis and requires the R&S®ZNLx-B1 option
Torque Wrench, 0.45 Nm
for 1.0 mm connectors, 6 mm width across flats
Torque Wrench, 0.23 Nm coupling torque
for 1.0 mm connectors with 6 mm width across flats
Torque Wrench, 0.34 Nm
for 1.0 mm connectors, 6 mm width across flats
Torque Wrench, 0.9 Nm
Torque Wrench
Torque Wrench for 3.5/2.92/2.4/1.85 mm connectors with 8 mm width across flats, 0.9 Nm coupling torque
Torque Wrench, 1.5 Nm
for type N connectors, 20 mm width across flats
Attenuator
0 Hz to 12.4 GHz, m/f 3 dB, 2 W
Attenuator
0 Hz to 12.4 GHz, m/f 6 dB, 2 W
Attenuator
0 Hz to 12.4 GHz, m/f 10 dB, 1 W
Attenuator
0 Hz to 12.4 GHz, m/f 20 dB, 1 W
High-Power Attenuator, 50 W
0 Hz to 2 GHz
High-Power Attenuator, 50 W
0 Hz to 2 GHz
High-Power Attenuator, 50 W
0 Hz to 2 GHz
High-Power Attenuator, 50 W
0 Hz to 2 GHz
High-Power Attenuator, 50 W
0 Hz to 2 GHz
High-Power Attenuator, 100 W
0 Hz to 2 GHz
High-Power Attenuator, 100 W
0 Hz to 2 GHz
High-Power Attenuator, 100 W
0 Hz to 2 GHz
High-Power Attenuator, 100 W
0 Hz to 2 GHz
High-Power Attenuator, 100 W
0 Hz to 2 GHz
High-Power Attenuator, 50W
0 Hz to 6 GHz, 20 dB
50 Ohm broadband limiter
Precision Termination, 75 Ω
1 W, DC to 3 GHz, N (m)
Termination, 50 Ω
1 W, DC to 4 GHz, N (m)
UHF Termination , 50 Ω
0 Hz to 2 GHz, 100 W, N (f)
Feedthrough Termination, 50 Ω
0.5 W, DC to 1 GHz, BNC (m/f)
Feedthrough Termination, 50 Ω
2 W, DC to 500 MHz, BNC (m/f)
Matching pad, 75 Ω, L section
bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section
Matching Pad 50/75 Ω, series resistor 25 Ω
0 Hz to 3.3 GHz
Matching pad, 75 Ω, series resistor 25 Ω
0 Hz to 2.7 GHz
Power Splitter, 2x 50 Ω
0 Hz to 2.7 GHz
Produits associés
