Key Facts
- Test solution of 1000BASE-T1 Ethernet interfaces
- Predefined, automated test steps
- Step-by-step wizard for user guidance
- Meets IEEE 802.3bp specification
- Complete test solution including fixture and clock divider
Key Facts
The R&S®RTO-K87 and R&S®RTP-K87 options offer automated test solutions for 1000BASE-T1 in line with the IIEEE 802.3bp specification. The test wizard guides the user via illustrated step-by-step instructions. The complete test solution includes fixture and clock divider. The R&S®Scope Suite runs on scope or separate PC.
The complete test solution covers all relevant test cases of the IEEE 802.3bp specification for the1000BASE-T1. A test fixture is available for signal access via a differential probe for accurate signals.
The R&S®ScopeSuite has a test wizard for guided steps. The tests used are fully automatic. In addition, single tests can be carried out for efficient debugging. The
limit editor lets you individually adjust standard-specific test limits.
The Ethernet compliance test is a fully guided test. Detailed, image-based instructions make it easy to correctly connect the oscilloscope and the probes to the test fixture and device under test. This increases the ease-of-use and reduces potential setup errors.
The test results are fully documented in a report created by the R&S®ScopeSuite. The test report can include numerical result data or oscilloscope screen shots depending on user preference. The reports are available in PDF, DOC and HTML formats.
Detailed report including setup parameters, measurement results and screenshots
The compliance test setup includes test cases that require a waveform generator and a network analyzer. R&S offers a complete solution with the R&S®RTO-B6 waveform generator and the R&S®ZND Vector Network Analyzer. The R&S®ScopeSuite compliance test software fully supports all instruments for a fully integrated compliance test solution.
Recommended configuration | R&S®RTO-K87; | - RTO2024 - RTO-B6 (for tests with disturber) - RTO-B4 - RT-ZF8 Ethernet test fixture - RT-ZF6 frequency converter - 2 x SMA cables - ZND or ZNB network analyzer (option K5 or K6 required) |
R&S®RTP-K87; | - RTP044 - RTP-B6 (for tests with disturber) - RT-ZF8 Ethernet test fixture - RT-ZF6 frequency converter - 2 x SMA cables - ZND or ZNB network analyzer (option K5 or K6 required) |
Numéro de commande 1329.7419.02
High definition mode.
Numéro de commande 1317.5522.02
Test fixture for 10/100/1000BASE-T, 10G-BaseT and BroadR-Reach Ethernet
Supported by R&S®RTO-K22, R&S®RTO-K23 and R&S®RTO-K24 Ethernet compliance test options.
Numéro de commande 1337.8579.02
Frequency converter board
for 1000BASE-T1 compliance test
Numéro de commande 1801.4126.02
SMA Adapter
High precision adapter board from automotive connector to SMA
Numéro de commande 1801.3694.02
Automotive Ethernet Compliance Fixture
Test fixture for 100BASE-T1 and 1000BASE-T1 compliance testing according to IEEE and OPEN TC8
Numéro de commande 1304.8305.02
OCXO 10 MHz
Increase time base accuracy to ±0.02 ppm after calibration
Numéro de commande 1329.7054.02
Arbitrary waveform generator
Add 2-channel 500 MSample/s waveform generator and 8-channel pattern generator
Numéro de commande 1328.5312.02
Full test set, Base Unit, bidirectional, 4.5GHz
Numéro de commande 1410.4609.02
Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface
Produits associés