Key facts
- Test solution of BroadR-Reach® Ethernet interfaces
- Predefined, automated test steps
- Step-by-step wizard for user guidance
- Clear and comprehensive test documentation
- Test report documents results including numerical data or screen shots
Key facts
The R&S®RTP-K24 and R&S®RTO-K24 option offers an automated compliance test solution for 100BASE-T1 or BroadR-Reach® Ethernet according to OPEN Alliance TC8 and IEEE 802.3bw compliance test specification. The test wizard guides the user via illustrated step-by-step instructions. Automatic test sequences allow for a fast test run. A configurable test report documents the test results. The complete Ethernet compliance test solution includes the R&S®RT-ZF8 Test Fixture.
Meets OPEN TC8 and IEEE 802.3bw test specifications
The complete test solution covers all mandatory and optional test cases of the OPEN TC8 test specification for ECU compliance testing. The complete solution includes an oscilloscope and a vector network analyzer. For accurate probing, the RT-ZF8 test fixture meets OPEN TC8 fixture validation.
The R&S®ScopeSuite has a test wizard for guided steps. The tests used are fully automatic. In addition, single tests can be carried out for efficient debugging. The limit editor lets you individually adjust standard-specific test limits.
Ease-of-use with image-based guided test steps
The Ethernet compliance test is a fully guided test. Detailed, image-based instructions make it easy to correctly connect the oscilloscope and the probes to the test fixture and the device under test. This increases the ease-of-use and reduces potential setup errors.
Clear and comprehensive reporting functionality
The test results are fully documented in a report created by the R&S®ScopeSuite. Depending on the user’s preference, the test report can include numerical result data or oscilloscope screen shots. The available output formats are PDF, DOC and HTML.
Test solution includes oscilloscope, VNA, Waveform generator and test fixtures
The compliance test setup includes test cases that need a waveform generator and a network analyzer. R&S offers a complete solution with the R&S®RTO-B6 waveform generator and the R&S®ZND Vector Network Analyzer. The R&S®ScopeSuite compliance test software fully supports all instruments for a fully integrated compliance test solution.
Recommended configuration | R&S®RTO-K24 | - RTO2004 - RTO-B6 (for tests with distruber) - RTO-B4 - RT-ZF8 Ethernet test fixture - RT-ZF3 Frequency converter - 2 x SMA cables - ZND or ZNB Network Analyser (option K5 or K6 required) - Shielding chamber |
R&S®RTP-K24 | - RTP044 - RTP-B6 (for tests with distruber) - RT-ZF8 Ethernet test fixture - RT-ZF3 Frequency converter - 2 x SMA cables - ZND or ZNB Network Analyser (option K5 or K6 required) - Shielding chamber |
Order number 1329.7419.02
High definition mode.
Order number 1337.8856.02
High definition mode
Order number 1317.5522.02
Test fixture for 10/100/1000BASE-T, 10G-BaseT and BroadR-Reach Ethernet
Supported by R&S®RTO-K22, R&S®RTO-K23 and R&S®RTO-K24 Ethernet compliance test options.
Order number 5025.0670.02
Frequency converter
for 100BASE-T1/BroadR-Reach compliance test
Order number 1801.4126.02
SMA Adapter
High precision adapter board from automotive connector to SMA
Order number 1801.3694.02
Automotive Ethernet Compliance Fixture
Test fixture for 100BASE-T1 and 1000BASE-T1 compliance testing according to IEEE and OPEN TC8
Order number 1304.8305.02
OCXO 10 MHz
Increase time base accuracy to ±0.02 ppm after calibration
Order number 1329.7054.02
Arbitrary waveform generator
Add 2-channel 500 MSample/s waveform generator and 8-channel pattern generator
Order number 1328.5312.02
Full test set, Base Unit, bidirectional, 4.5GHz
Order number 1410.4609.02
Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface
Related products