R&S®NGC100 Power supply series

A basic DC power supply from R&S®Essentials

R&S®NGC100 power supply series, front low

Key facts

Max. output power: 100 W
Max. voltage per channel: 32 V
Max. current per channel: 3 A, 5 A or 10 A
Galvanically isolated, floating and short-circuit proof outputs
Intuitive, price-transparent online product configurator

Get a Quote Configure your product

Compact and easy to use

R&S®NGC100 DC power supplies are very energy efficient, remaining cool and quiet, even at maximum load. Practical interfaces and connectors make work quick and convenient while special applications have comfort functions. One, two, or three channels – a wide range of functions and fundamental specifications make R&S®NGC100 DC power supplies ideal for:
-Development labs
-Industrial environments
-Manufacturing
-Education
You can now use the new online configurator to quickly design your R&S®NGC100 DC power supply with full price transparency. Get your request processed in no time by the authorized distribution partner of your choice.

Datasheet

Quick links

Show available models
Show available options
Show all downloads

Features & benefits

Maximum output power at various operating points

With FlexPower

Get maximum power at various operating points. Unlike single-range power supplies, variable voltage and current combinations can be generated within an overall power limit.

Emulate real-world scenarios

With EasyArb

Generate complex time varying output voltage or current sequences with the EasyArb function to emulate normal power subsystem behavior early in the design process or simulate power problems for DUT design verification. The EasyArb function lets you generate time varying output voltage and current sequences with dwell times down to 10 ms.

Log measurement values

Every millisecond

Logging data is vital to long-term monitoring, reviewing test setups and repeating test conditions to analyze power behavior or optimize power consumption. R&S®NGC100 power supplies simultaneously log voltage and current measurements over time on all outputs with a maximum acquisition rate of 1000 samples/s. Easily export the time stamped data as a CSV file for analysis, reports and documentation.

Higher current and voltage levels

With parallel and serial operation

Each output in the 2-channel and 3-channel models is completely isolated for maximum flexibility. Use the channels independently or combine them in series to increase the maximum voltage to 96 V, or in parallel for up to 10 A of current. The full galvanic isolation means that channels can be connected to supply balanced circuits without any need to think about grounding.

**Up to 96 V with the R&S®NGC103 power supply**

Control inrush current

With EasyRamp

Some test setups require a continuous rise in supply voltage instead of a rapid jump to control inrush currents. Increase output voltage continuously within 10 ms to 10 s with the EasyRamp function.

Create power up sequences

With output delay

Turn on each channel individually with a delay to meet requirements for modern micro controllers with multiple supply voltage levels and demand-specific power up sequences.

Compensate voltage drops

Using remote sensing

Improve voltage regulation and measurement accuracy with remote sensing. Regulate output voltage directly at the DUT input terminals instead of the power supply. The sense function compensates for voltage drops in supply leads, especially in applications with high current levels. R&S®NGC100 power supplies provide sense connections for each output.

Start instrument functions

With an external trigger

An external trigger signal (TTL) to the voltage interface on the back panel of the instrument can start an arbitrary function, activate and deactivate output delays or activate data logging.

Direct control of output voltage

With the analog control interface

Directly and quickly control output voltage. External analog voltage from 0 V to 10 V or current from 4 mA to 20 mA can control any or all outputs with input scaling of 0 to 100%. Galvanic isolation between the control voltage and the outputs simplifies connections while maintaining user safety even in floating circuit applications.

Available models

Specifications

Electrical specifications
Number of output channels	1 / 2 / 3
Total output power	max. 100 W
Maximum output power per channel	100 W/50 W/33 W
Output voltage per channel	0 V to 32 V
Maximum output current per channel	10 A/5 A/3 A
Voltage ripple and noise (20 Hz to 20 MHz)	R&S®NGC101: < 1 mV (RMS) R&S®NGC102/103: < 450 µV (RMS)
Current ripple and noise (20 Hz to 20 MHz)	R&S®NGC101: < 1.5 mA (RMS) (meas.) R&S®NGC102/103: < 1 mA (RMS) (meas.)
Load recovery time (10 % to 90 % load change within a band of ± 20 mV of set voltage)	< 1 ms (meas.)
Programming resolution voltage	1 mV
Programming resolution current	< 1 A: 0.1 mA (R&S®NGC101: 0.5 mA) ≥ 1 A: 1 mA
Output measurements
Readback resolution voltage	1 mV
Readback resolution current	< 1 A: 0.1 mA (R&S®NGC101: 0.5 mA) ≥ 1 A: 1 mA
Readback accuracy voltage ±(% of output + offset)	< 0.05 % + 2 mV
Readback accuracy current ±(% of output + offset)	typ. < 0.05 % + 4 mA (R&S®NGC101: typ. < 0.15 % + 10 mA)
Special functions
Measurement functions	voltage, current, power, energy
Protection functions	OVP, OCP, OPP, OTP
FuseLink function	●
Fuse delay at output-on	●
Sense function	●
Sink mode	-
Output sequencing	●
External trigger	●
Arbitrary function	● (EasyArb)
Analog/modulation interface	●
Data logging	●
Display and interfaces
Display	3.5" QVGA
Rear panel connections	Connector block with 4 lines per channel
Remote control interfaces: standard	USB, LAN; R&S®NGC100-G models with IEEE-488 (GPIB)
General data
Dimensions (W × H × D)	222 mm × 97 mm × 291 mm
Weight	2.6 kg
Rack installation	R&S®HZC95 option