Isolated probing system For oscilloscopes

The next ground breaking probe solution

Isolated probing system For oscilloscopes
R&S®isolated probe system for oscilloscope, application Image
R&S®isolated probe system for oscilloscope, application Image
Open Lightbox
Isolated probing system For oscilloscopes
R&S®isolated probe system for oscilloscope, application Image
R&S®isolated probe system for oscilloscope, application Image
Open Lightbox
Isolated probing system For oscilloscopes
R&S®isolated probe system for oscilloscope, front high
R&S®isolated probe system for oscilloscope, front high
Open Lightbox
Isolated probing system For oscilloscopes
R&S®isolated probe system for oscilloscope, back high
R&S®isolated probe system for oscilloscope, back high
Open Lightbox
R&S®isolated probe system for oscilloscope, application Image R&S®isolated probe system for oscilloscope, application Image R&S®isolated probe system for oscilloscope, front high R&S®isolated probe system for oscilloscope, back high

Key facts

  • 100, 200, 350, 500 MHz and 1 GHz bandwidth, upgradeable
  • > 90 dB CMRR at 1 GHz
  • ± 3000 V differential input range and offset
  • ± 60 kV common mode range
  • Dual connectivity with a Rohde & Schwarz probe interface and SMA connector
Get a Quote

NEXT GENERATION GROUND BREAKING SOLUTION

With optical isolation

The R&S®RT-ZISO isolated probing system can tackle the challenge of measuring in high voltage and fast switching environments. The power-over-fiberoptic architecture galvanically isolates the device under test (DUT)for the highest possible common mode rejection ratio (CMRR) at up to 1 GHz. The complete systems compensate thermal drifts and gain-errors for the highest possible uncompromising signal fidelity .

Quick links

Features & benefits

For fast common mode probing challenges

The R&S®RT-ZISO isolated probing system suppresses interference from fast common mode signals with optical isolation for a CMRR of > 90 dB at 1 GHz. This helps with high-side gate measurements on complementary switching circuits especially wide bandgap devices.

  • 1 GHz > 90 dB
  • 500 MHz > 100 dB
  • 100 MHz > 115 dB
  • 1 MHz > 145 dB

Open Lightbox

Isolation limit CM noise loop formation in the system.

Isolation limit CM noise loop formation in the system.

Probe tips matter

The R&S®RT-ZISO comes in a variety of probe tips and the MMCX probe tip is the most important one for CMRR performance. Different connector types such as square pins and wide square pins are also supported with different attenuation ratios. The probe tip cables are long and formable for allow easy access to aa probe point with minimal mechanical stress.

Open Lightbox

Formable probe tips with different connectors and browser probe.

Formable probe tips with different connectors and browser probe.

Hassle-free setup with Rohde & Schwarz oscilloscopes

Using the R&S®RT-ZISO with the Rohde & Schwarz probe interface on our oscilloscopes creates a seamless experience. The instrument detects and sets up the probe tip information. Offset and range control can be easily configured on the instrument. Users can also easily use all Rohde & Schwarz oscilloscope functions and features such as fast acquisition and responsive FFT in their measurements.

Open Lightbox

Seamless connection for control with a Rohde & Schwarz oscilloscope

Seamless connection for control with a Rohde & Schwarz oscilloscope

Investment protection

When using R&S®RT-ZISO isolated probe systems, users can connect to any oscilloscope with a BNC or SMA interface. Investment in instruments can be based on performance needs. R&S®RT-ZISO lets bandwidth be upgraded based on future needs. 

Open Lightbox

Future bandwidth upgrade possible with the R&S®RT-ZISO

Future bandwidth upgrade possible with the R&S®RT-ZISO

Safely measure, securely operate

The R&S®RT-ZISO complies with CAT III 1000V safety ratings. The material and mechanical structures comply with IEC/EN 61010-31 covering hand-held probe assemblies for electrical measurements. 

  • CAT III 1000V safety rating
  • Safe attach on probe tips
  • Class 1 laser safety

Open Lightbox

Safe attach lets you safely swap out probe tips

Safe attach lets you safely swap out probe tips

Available options

Probe tips
Product
Description
R&S®ZISO-Z101

Order number 1803.4100.02

Description

MMCX probe tip with 1.5x, 8 Vrms, ±45 Vpk , 50 Ω, 1000 V CAT III

Tip length with 36 cm (14 inch)

R&S®ZISO-Z201

Order number 1803.4200.02

Description

R&S®MMCX probe tip with 10x, 300 Vpk, 10 MΩ, 1000 V CAT III

Tip length with 21 cm (8 inch)

R&S®ZISO-Z202

Order number 1803.4300.02

Description

Square pin probe tip with 25x, 750 Vpk, 10 MΩ, 1000 V CAT III

Tip length with 32 cm (12 inch)

R&S®ZISO-Z203

Order number 1803.4400.02

Description

Wide square pin probe tip with 100x, 3000 Vpk, 10 MΩ, 1000 V CAT III

Tip length with 38 cm (15 inch)

R&S®ZISO-Z301

Order number 1803.4500.02

Description

Isolated browser tip with 10x, 300 Vpk, 10 MΩ, 300 V CAT III

Tip length with 120 cm (47 inch)

R&S®ZISO-Z302

Order number 1803.4600.02

Description

Isolated browser tip with 100x, 3000 Vpk, 100 MΩ, 1000 V CAT III

Tip length with 120 cm (47 inch)

Cables
Product
Description
R&S®ZISO-B403

Order number 1804.5017.02

Description

3 meter (10 foot) optical fiber cable 

installed and calibrated with base unit when ship

R&S®ZISO-B410

Order number 1804.5023.02

Description

10 meter optical fiber cable (33 feet)

installed and calibrated with base unit when shipped

Bandwidth options
Product
Description
R&S®ZISO-B901

Order number 1804.5030.02

Description

100 MHz bandwidth option

installed and calibrated with base unit when shipped

R&S®ZISO-B902

Order number 1804.5046.02

Description

200 MHz bandwidth option

installed and calibrated with base unit when ship

R&S®ZISO-B903

Order number 1804.5052.02

Description

350 MHz bandwidth option

installed and calibrated with base unit when ship

R&S®ZISO-B905

Order number 1804.5069.02

Description

500 MHz bandwidth option

installed and calibrated with base unit when shipped

R&S®ZISO-B910

Order number 1804.5075.02

Description

1 GHz bandwidth option

installed and calibrated with base unit when shipped

Related products

High voltage probes for oscilloscopes, Front view

High voltage probes
R&S®Scope Rider Handheld Oscilloscope, Front view

R&S®Scope Rider
R&S®MXO4 oscilloscope, front view

R&S®MXO 4
R&S®MXO 5 oscilloscope, front low

R&S®MXO 5
R&S®MXO 5C oscilloscope, front low

R&S®MXO 5C
R&S®RTO6 oscilloscope, Front view

R&S®RTO6

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.