8445 Results
LTE Release 9 Technology Introduction - White Paper
19-Dec-2011 | AN-No. 1MA191
Remote Usage of STREAM EXPLORER via Ethernet Network
31-Mar-1999 | AN-No. 7BM01
HSPA+ Technology Introduction - White Paper
14-Feb-2012 | AN-No. 1MA205
This paper shows how to perform a n-port multi-port calibration by using calibration unit with a lower number of ports than available of the vector network analyzer.
06-Feb-2013 | AN-No. 1EZ70
This document describes the typical measurements performed on mixers and how they can be implemented on the ZVA Vector Network Analyzer with the ZVA-K4 Frequency Conversion option.
06-May-2009 | AN-No. 1EZ58
This application notes introduces the Multi-Standard Radio Analyzer function of the R&S®FSW and shows how it performs the measurement on multi-standard radio transmitters.
17-Jul-2012 | AN-No. 1EF83
Spectral display of RF analysis of Test Receivers on a PC
18-Jan-2002 | AN-No. 1EE05
This application note describes how to characterize RMS jitter with the R&S FSUP signal source analyzer. The instrument can distinguish random jitter and periodic jitter easily and measure all parameters of interest.
05-Apr-2011 | AN-No. 1EF71
Rohde & Schwarz ATC session border controller
11-Mar-2019
This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.
15-Sep-2012 | AN-No. 1MA206
LTE-Advanced Technology Introduction
20-Aug-2012 | AN-No. 1MA169
This application note describes the techniques to measure the dielectric properties of materials using a vector network analyzer. It also shows methods for converting the s-parameters to dielectric properties.
23-May-2012 | AN-No. RAC-0607-0019
This application note introduces the concept of multistandard radio base stations as well as solutions for transmitter and receiver tests based on Rohde & Schwarz signal generators and Rohde & Schwarz signal and spectrum analyzers.
06-Jul-2012 | AN-No. 1MA198
IEEE 802.16m Technology Introduction
29-Jul-2010 | AN-No. 1MA167
This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to perform HSDPA Tests (from Rel.5 up to Rel.8 / DC-HSDPA+) measurements on transmitter characteristics and receiver characteristics in line with TS 34.121 V9.5.0.
17-Aug-2012 | AN-No. 1CM96
The R&S® IQ File Cutter Application can load IQ data from supported IQ file formats and export part of the signal to another file.
11-May-2020 | AN-No. GFM338
This application note describes how to integrate R&S®ZVA/ZVB/ZVT vector network analyzers with AWR's electronic design automation (EDA) software. Measured data can be exported using the AWR® TestWave™ tool via GPIB/LAN and verified with simulated data.
01-Jun-2010 | AN-No. 1MA163
RMS is one of the most common parameters in test and measurement. Mathematically, it is the quadratic mean of continuously varying values (waveform). R&S RTM-K32 option provides a digital RMS conversion function for a high-bandwidth RMS measurement.
17-Aug-2015
This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to take Rel-6 measurements on transmitter characteristics and execute performance tests according to TS 34.121 V9.7.0, clauses 5 and 10.
27-Nov-2013 | AN-No. 1CM97
The objective of this paper is to evaluate the performance of a power supply using an oscilloscope. The main measurements taken are the input frequency, output voltage, output current, and the switching frequency.
26-Nov-2013 | AN-No. 1TD04
To allow optimization early on in the R&D lab, Rohde & Schwarz provides a free tool to simplify conducted emissions debugging using oscilloscopes.
27-Sep-2021 | AN-No. 1SL372
This Application Note focuses on measurement of harmonics using modern spectrum analyzers. It highlights the source of harmonics before focusing on their measurement using a spectrum analyzer.
02-Mar-2012 | AN-No. 1EF78
This application note describes how to generate and analyze wideband digitally modulated signals in the mm-wave range. Rohde & Schwarz measuring equipment and some 3rd party off-the-shelf accessories are used for both signal generation and analysis.
02-Sep-2014 | AN-No. 1MA217
Time Delay Measurement in the Digital Studio
20-Jul-2001 | AN-No. 7BM20
Radiomonitoring with Test Receivers ESN/ESVN
18-Jan-2002 | AN-No. 1EE13
LTE Location Based Services (LBS) involve the process of determining where a device is located.
29-May-2015 | AN-No. 1SP05
This application note explains, how to calculate electric and magnetic field strength and power flux density. Additional applications are calculation of propagation loss or antenna factors.
10-Dec-2018 | AN-No. 1MA85
The option R&S®EMC32-K24 extends the emission measurement of the EMI Auto Test (R&S®EMC32-K10) with interactive measurement capabilities. This extension is useful for test verification and measurement during product improvement.
25-Jun-2014 | AN-No. 1SP06