Active differential probes for oscilloscopes

Active differential probes for oscilloscopes
Open Lightbox
Active differential probes for oscilloscopes, Front view

Key facts

  • Bandwidth: 200 MHz to 4.5 GHz
  • Input impedance: up to 1 MΩ
  • Low input capacitance: less than 1 pF
  • Very low added noise
  • Integrated high precision DC voltmeter (not available for all models)

Brief description

Differential signals are used especially at high clock rates to effectively suppress common mode interference and to transmit broadband signals without errors. These signals can be measured accurately only by using differential probes. Rohde & Schwarz active differential probes offer high input impedance, high common-mode rejection and low added noise.

Available models

Available models
Models
Bandwidth
Max. voltage
Attenuation factor
Input impedance
Comment

R&S®RT-ZD10

Order number 1410.4715.02

Click on order no. to copy
Order number 1410.4715.02 is now copied to your clipboard.
Bandwidth
1.0 GHz
Max. voltage
Between signal sockets: ±5 V (±5 V offset compensation), each signal socket to ground: ±8 V (±22 V offset compensation)
Attenuation factor
10:1
Input impedance
1 MΩ || 0.6 pF
Comment
ProbeMeter and micro button for instrument control, Rohde & Schwarz probe interface, including external attenuator R&S®RT-ZA15

R&S®RT-ZD20

Order number 1410.4409.02

Click on order no. to copy
Order number 1410.4409.02 is now copied to your clipboard.
Bandwidth
1.5 GHz
Max. voltage
Between signal sockets: ±5 V (±5 V offset compensation), each signal socket to ground: ±8 V (±22 V offset compensation)
Attenuation factor
10:1
Input impedance
1 MΩ || 0.6 pF
Comment
R&S®ProbeMeter and micro button for instrument control, Rohde & Schwarz probe interface

R&S®RT-ZD30

Order number 1410.4609.02

Click on order no. to copy
Order number 1410.4609.02 is now copied to your clipboard.
Bandwidth
3.0 GHz
Max. voltage
Between signal sockets: ±5 V (±5 V offset compensation), each signal socket to ground: ±8 V (±22 V offset compensation)
Attenuation factor
10:1
Input impedance
1 MΩ || 0.6 pF
Comment
R&S®ProbeMeter and micro button for instrument control, Rohde & Schwarz probe interface

R&S®RT-ZD40

Order number 1410.5205.02

Click on order no. to copy
Order number 1410.5205.02 is now copied to your clipboard.
Bandwidth
4.5 GHz
Max. voltage
Between signal sockets: ±5 V (±5 V offset compensation), each signal socket to ground: ±8 V (±22 V offset compensation)
Attenuation factor
10:1
Input impedance
1 MΩ || 0.4 pF
Comment
R&S®ProbeMeter and micro button for instrument control, Rohde & Schwarz probe interface

Available options

Probe accessories
Product
Description

Order number 1416.0428.02

Click on order no. to copy
Order number 1416.0428.02 is now copied to your clipboard.
Description

Mini clips

10 clips

Order number 1416.0434.02

Click on order no. to copy
Order number 1416.0434.02 is now copied to your clipboard.
Description

Micro clips

4 clips

Order number 1416.0440.02

Click on order no. to copy
Order number 1416.0440.02 is now copied to your clipboard.
Description

Lead set (5 x 6cm/2.4", 5 x 15cm/5.9")

Order number 1417.0609.02

Click on order no. to copy
Order number 1417.0609.02 is now copied to your clipboard.
Description

Pin set for R&S®RT-ZD10/20/30

20 solder-in signal pins, 10 signal pins with variable spacing, 2 browser adapters, 2 square pin adapters

Order number 1417.0867.02

Click on order no. to copy
Order number 1417.0867.02 is now copied to your clipboard.
Description

Pin Set for R&S®RT-ZD40

100 solder-in pins, 2 variable spacing socket adapter, 2 rigid browser adapter, 2 spring-loaded browser adapter”

Order number 1417.0909.02

Click on order no. to copy
Order number 1417.0909.02 is now copied to your clipboard.
Description

N(m) adapter for R&S®RT-Zx probes

To connect R&S®RT-Zx probes to spectrum and network analyzers with N(f) connectors; USB connector for power supply and communication

Order number 1410.4744.02

Click on order no. to copy
Order number 1410.4744.02 is now copied to your clipboard.
Description

External attenuator

10:1, 2.0 GHz, 1.3 pF, 60 V DC, 42 V AC (peak) for R&S®RT-ZD20/30 probes. Included in R&S®RT-ZD10.

Order number 1317.7031.02

Click on order no. to copy
Order number 1317.7031.02 is now copied to your clipboard.
Description

Probe pouch for R&S®RTO2000 and R&S®RTE1000 oscilloscopes

Order number 1335.7875.02

Click on order no. to copy
Order number 1335.7875.02 is now copied to your clipboard.
Description

Accessory case for probes and small parts for all Rohde and Schwarz oscilloscopes

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.