R&S®FSPN Phase noise analyzer and VCO tester

Unrivaled sensitivity meets high speed

R&S®FSPN Phase noise analyzer and VCO tester
Open Lightbox
R&S®FSPN Phase noise analyzer and VCO tester
Open Lightbox
R&S®FSPN Phase noise analyzer and VCO tester
Open Lightbox
R&S®FSPN Phase noise analyzer and VCO tester
Open Lightbox
R&S®FSPN phase noise analyzer and VCO tester, front view R&S®FSPN phase noise analyzer and VCO tester, hero view R&S®FSPN phase noise analyzer and VCO tester, side view, VCO test R&S®FSPN phase noise analyzer and VCO tester, back view

Key facts

  • Pure phase noise analyzer and VCO tester with high measurement speed
  • Simultaneous measurement of phase noise and amplitude noise
  • Frequency range from 1 MHz to 50 GHz
  • Extremely low‑noise internal DC sources for automatic VCO characterization
  • Automatic SCPI recording and 100% compatible with R&S®FSWP
  • 3-year warranty extension

Increased efficiency and reproducibility, from lab to production

The R&S®FSPN phase noise analyzer and VCO tester is very sensitive with high measurement speeds for characterizing sources such as synthesizers, VCOs, OCXOs and DROs. It is ideal for demanding phase noise and VCO analysis in development and production . Equipped with two low phase noise synthesizers and a real-time cross correlation engine for increased measurement sensitivity, just a few correlations are needed to measure very high-quality oscillators, synthesizers or VCOs in production. Increase the number of correlations to characterize the most sensitive commercially available synthesizers and oscillators in R&D.

Features & benefits

Measurement speed taken to its limit

Speed up the development of your device

Signal sources can be developed and optimized faster with an instrument that delivers results with short measurement times. The R&S®FSPN takes just a few seconds to display the phase noise trace of high-end sources such as OCXOs or DROs.

Phase noise analysis on the R&S®FSPN
Open Lightbox

Phase noise analysis on the R&S®FSPN

Phase noise measurements with high sensitivity

Real-time cross-correlation for improved phase noise sensitivity

The R&S®FSPN includes real-time cross-correlation to measure sources with very low phase noise. The sensitivity improvement depends on the number of cross correlations performed, as follows:

ΔL = 5 · log(n), where

  • ΔL: improvement in phase noise sensitivity in dB,
  • n: number of cross-correlations
The very low synthesizer phase noise in the R&S®FSPN reduces the number of necessary correlations, shortening the measurement time.

Simultaneous phase noise and amplitude noise
Open Lightbox

Simultaneous phase noise and amplitude noise

The R&S®FSPN measures phase and amplitude noise in parallel and shows the current cross correlation sensitivity gain indicated by the gray area.

Fastest VCO characterization

Thanks to its extremely low-noise internal DC sources, the R&S®FSPN can measure the phase noise of voltage-controlled oscillators (VCO) at various tuning and supply voltages. Quíck VCO characterization varying tuning voltage or the supply voltage is possible. The following parameters are delivered instantaneously:

  • Frequency versus voltage
  • Sensitivity versus voltage
  • Output power versus voltage
  • Current drain versus voltage
  • Output power versus frequency

VCO characterization
Open Lightbox

VCO characterization

Transient response analysis

Frequency and phase measurements in time domain

The R&S®FSPN has up to 8 GHz bandwidth for detailed synthesizer characterization, including measurements of settling times after frequency hops, ramps, switching times etc. The R&S®FSPN has narrowband analysis down to 40 MHz for narrowband characterization when analyzing transient PLL responses in detail.
The display has a persistence mode for all traces, making it easy to estimate the intensity of the parameter scatter or the presence of any outliers.

Transient analysis, settling time measurement
Open Lightbox

Transient analysis, settling time measurement

SCPI recording

SCPI recording makes it easy to move from manual operation to automated test sequencing. Just operate the instrument and export the automatically created scripts in different languages such as Matlab®, Python or C# to replicate the manual measurements.

SCPI recorder on the R&S®FSPN
Open Lightbox

SCPI recorder on the R&S®FSPN

Available models

Available models
Models
Frequency range
Phase noise
Instrument type

R&S®FSPN8 Phase noise analyzer and VCO tester

Order number 1322.8003.07

Frequency range
1 MHz - 8 GHz
Phase noise
 < –163 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
 
Instrument type
Phase noise analyzer and VCO tester

R&S®FSPN26 Phase noise analyzer and VCO tester

Order number 1322.8003.25

Frequency range
1 MHz - 26.5 GHz
Phase noise
< –163 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
Instrument type
Phase noise analyzer and VCO tester

R&S®FSPN50 Phase noise analyzer and VCO tester

Order number 1322.8003.49

Frequency range
1 MHz - 50 GHz
Phase noise
 < –163 dBc (1 Hz)
(f = 1 GHz, 10 kHz offset)
 
Instrument type
Phase noise analyzer and VCO tester

Related videos

The R&S®FSPN – unrivalled sensitivity meets high speed

Next generation technologies like radar and satellite communication with high data rates call for innovative testing solutions to develop and manufacture RF components. With the launch of the R&S®FSPN, Rohde & Schwarz is adding a new member to the phase noise analyzer portfolio, enabling increased efficiency and reproducibility of phase noise measurements and VCO characterization from lab to production. Watch the video and find out more!

29-Sep-2021

More about phase noise measurements

White paper: Understanding phase noise measurement techniques

Learn more about how different instruments measure phase noise.

More information

White paper: Understanding phase noise fundamentals

This white paper provides a brief technical introduction to phase noise concepts as well as an overview of how phase noise is measured and reported.

More information

White paper: Understanding voltage controlled oscillators

Download this white paper and learn more about voltage controlled oscillators and measurements made during the VCO characterization process.

More information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.