R&S®HX002H3/H3M HF dipole with ATU

1.5 MHz to 30 MHz

R&S®HX002H3/H3M  HF dipole with ATU
Ingrandisci immagine
R&S®HX002H3/H3M  HF dipole with ATU
Ingrandisci immagine
R&S®HX002H3/H3M  HF dipole with ATU
Ingrandisci immagine
R&S®HX002H3/H3M HF dipole with ATU, front view R&S®HX002H3/HX002H3M HF dipole with ATU, bottom view R&S®HX002H3/HX002H3M HF dipole with ATU, bottom high

Key Facts

  • Suitable for transmitter powers up to 150 W
  • Omnidirectional coverage with high-angle radiation (NVIS), no skip zone
  • Integrated antenna tuning unit supports fast frequency hopping
  • Compact dimensions enable set up close to neighboring antennas
  • Single supporting mast

For stationary or shipboard applications

R&S®HX002H3/H3M HF dipoles with ATUs enable optimum coverage of all distance ranges. They are particularly useful for short and medium distance radiocommunications, since skip zones prevent rod antennas from providing sufficient transmission reliability at distances of less than 1000 km. The fully automated ATU provides perfect matching to the transmitting system and enables use of its full RF output power capabilities. Together with the R&S®GX002, it seamlessly integrates into the R&S®Series 4100 and M3TR radio systems. A third-party system controller can run the antenna via Ethernet or it can be fully automated with minimal third-party transceiver interfaces.

Features & benefits

High RF power in a small antenna

The R&S®HK002H3 features relatively small, 5 m long dipole based radiators. R&S®HK002H3M dipoles are even shorter (just 2.5 m) to accommodate the limited space onboard ships. The integrated, fully automatic antenna tuning unit perfectly matches the radiators to the transmitting system, enabling full RF output power capabilities of up to 150 W.

High efficiency

The R&S®HX002H3/H3M only uses low-loss capacitors and air-core coils for matching and requires no attenuating measures such as resistor-damped structures. This is more efficient and sends more power into the airwaves.

HF-cable-only interface

The R&S®HX002H3 as well as the R&S®HX002H3M feature a single cable interface. Just one cable carries all the signals (RF, power supply and control), making installation and system integration both easier and more reliable.

Compatibility with a wide variety of transceivers

The R&S®GX002 junction unit fully controls and powers the R&S®HX002H3/H3M. The junction unit handles all communications to and from the transceiver. Universal interfaces such as LAN, coaxial and optical ports allow the junction unit to work with the latest shortwave transceivers, older Rohde & Schwarz transceivers in legacy applications and transceivers from other manufacturers.

Fully automatic operation in autonomous mode

The combination of the R&S®GX002 junction unit and the R&S®HX002H0 enables operations in "autonomous mode". This requires very few control signals and allows third-party transceivers to operate without adjusting the control protocol.

Available models

Available models
Modelli
Application
Frequency range
Max. permissible input power
Dimensions (length x width x height including rods)
Weight

R&S®HX002H3 HF dipole with ATU

Application
Stationary land based
Frequency range
1.5 Mhz - 30 Mhz
Max. permissible input power
100 W CW
150 W PEP
Dimensions (length x width x height including rods)
approx. 9.5 m x 4 m x 1.8 m
Weight
approx. 50 kg

R&S®HX002H3M HF dipole with ATU

Application
For naval use
Frequency range
1.5 MHz - 30 Mhz
Max. permissible input power
100 W CW
150 W PEP
Dimensions (length x width x height including rods)
approx. 4.5 m x 2.5 m x 1.8 m
Weight
approx. 37.5 kg

Available options

Accessories
Product
Descrizione
R&S®KM451B1

Order Number 4028.3351.02

Descrizione

Lattice mast, length: 10 m (for roof mounting)

Lattice mast for the R&S®HX002, the R&S®HX002A1, the R&S®HX002H1, the R&S®HL451, the R&S®HL471, 10 meters, with guy ropes and safety climb

R&S®KM451B2

Order Number 4028.3400.02

Descrizione

Lattice mast, length: 15 m (standard)

Lattice mast for the R&S®HX002, the R&S®HX002A1, the R&S®HX002H1, the R&S®HL451, the R&S®HL471, 15 meters, with guy ropes and safety climb

R&S®KM002Z3

Order Number 4115.9540.02

Descrizione

Isolating rope set for the R&S®KM451B1/B2;
for use together with the R&S®HX002H0, R&S®HX002H1/H2/H3

R&S®KM451Z5

Order Number 4039.8308.03

Descrizione

Mast adapter

Mast adapter for the R&S®HX002H3 on the R&S®KM451B1/B2

R&S®KM002Z4

Order Number 4115.9740.03

Descrizione

Tiltable Mast

for R&S®HX002H1, R&S®HX002H3 & R&S®HX002A1 antennas, 5 meters with guy ropes

General
Product
Descrizione
R&S®KM002Z4-K

Order Number 4115.9811.02

Descrizione

Upgrade kit for tilting function; option for 5 m R&S®KM002Z4 mast

Richiedi informazioni

Hai qualche domanda o ti servono altre informazioni? Compila il modulo e ti ricontatteremo al più presto.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.