Embedding & Equalization oscilloscope software

General analysis

Embedding & Equalization oscilloscope software
ライトボックスを開く
Embedding & Equalization oscilloscope software
ライトボックスを開く
Embedding & Equalization oscilloscope software, Software Embedding & Equalization oscilloscope software, Screenshot

主な特長

  • High flexibility in defining a signal path with emulated signal distortion (Embedding) and signal recovery (Equalization)
  • Embedd up to 5 user configurable components 
  • Define a cascade of equalizer containing of TX-FFE, CTLE, RX-FFE and/or DFE
  • Pre-defined equalizer coefficients for common interface standards
  • Full PAM-N support with option RTP-K135

Brief Description

The Embedding & Equalization option enables the emulation of pre-distortion (also called pre-emphasis or de-emphasis) at the transmitter side, the emulation of a lossy channel (e.g. embeddding transmission loss of a PCB trace or long cable) and the emulation of various equalizer types at the receiver side.

特長と利点

Flexible configuration

Cascading of embedding & equalization

The R&S®RTP offers highest flexibility for the configuration of a signal lane that matches the characteristics of the DUT and its respective target application, including lossy signal channel and TX and RX equalizers. Select the respective components and configure the application specific parameters. You can build your individual cascade of deembedding, TX-equalizer, signal channel embedding and finally RX equalization.
The R&S®RTP computes FIR filters automatically, depending on the loaded S-parameter files for embedding and the defined coefficients for the equalizers.

Signal Lane dialog with access to TX-FFE, Embedding and Equalizer setups
ライトボックスを開く

Signal Lane dialog with access to TX-FFE, Embedding and Equalizer setups

Pre-defined parameters

Benefit from preconfigured equalizer and embedding settings for common interface standards

The signal configurator is the central entry point for signal integrity analysis. It supports you with interface standards depending configurations such as symbol rate, PAM order, CDR settings and equalizer coefficients. Just select an input channel as the source and the appropriate interface technology and continue with configuration of deembedding, embedding and equalization, before you start the in-depth analysis with automated measurements, eye as well as jitter and noise tools.

Signal configurator: select a interface standard
ライトボックスを開く

Signal configurator: select a interface standard

Equalizer training

Optimize coefficients for FFE or FFE+DFE

Optimize the tap coefficients for FFE and DFE equalizer with an automated training for your dedicated signal.

Equalizer Training for FFE or FFE+DFE
ライトボックスを開く

Equalizer Training for FFE or FFE+DFE

Previews for Equalizers

Validate your Equalizer setup with preview diagrams for Magnitude, Phase, Group delay, Step response or the taps.

Preview diagram for CTLE: Tab view
ライトボックスを開く

Preview diagram for CTLE: Tab view

利用可能なモデル

利用可能なモデル
モデル
Embedding
Equalizer filters
Base unit

R&S®RTP-K126

注文番号 1800.6025.02

Embedding
Up to 5 components
Equalizer filters
TX:FFE; RX: CTLE, FFE, DFE
Base unit

R&S®RTO6-K126

注文番号 1801.8109.02

Embedding
Up to 5 components
Equalizer filters
TX:FFE; RX: CTLE, FFE, DFE
Base unit

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

マーケティング・パーミッション

お問い合わせ内容が送信されました。 後ほどご連絡致します。
An error is occurred, please try it again later.
一般および法的情報

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

抽選キャンペーン「10 YEARS ROHDE & SCHWARZ OSCILLOSCOPES」に関する利用条件

1. 抽選キャンペーン「10 YEARS ROHDE & SCHWARZ OSCILLOSCOPES」(以降、「抽選」と呼びます)は、Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0(以降、「R&S」と呼びます)によって主催されます。

2. すべての参加者は、2020年1月1日から2020年12月31日までの期間中に、参加者の氏名、会社名、ビジネス用メールアドレスを入力することで抽選への参加登録を行えます。

3. 参加は無料です。商品またはサービスの購入経験の有無は問いません。

4. 抽選は法人のみを対象としており、賞品獲得者は法人に限られます。個人の場合、自分の名前と自分のアカウントによる参加は認められませんが、法人の名前で、その法人の代理として参加フォームを提出することにより、法人の代表として参加することが可能です。

5. 賞品として、2020年1月1日から2020年12月31日までの期間内に、R&S®RTB2000 10台のうちの1台を獲得できます。

賞品:R&S®RTB2000 デジタル・オシロスコープ

6. 抽選は、ローデ・シュワルツ本社、Muehldorstrasse 15, 81671 Munichで行われます。賞品獲得者には、5営業日以内にメールでお知らせいたします。

7. 法人の正式な代表者が、賞品受け取りの意向をローデ・シュワルツに通知するものとします。受け取り辞退が発生した場合、または2週間以内に返事がない場合は、新たな賞品獲得者が抽選によって選ばれます。4週間以内に賞品獲得者を決定できない場合、抽選は終了し、賞品は没収となります。

8. R&Sの従業員とその家族、および抽選処理の関係者とその家族は、参加フォームへの記入対象から除外されます。

9. 賞品の現金同等物または交換は許可されていません。賞品は譲渡できません。参加者の国で課されるすべての税金、徴収金、関税、手数料、およびその他の料金は、参加者が負担するものとします。

10. 個人データは、本抽選キャンペーンの目的でのみ処理され、別段の合意がない限り、抽選から4週間後に削除されます。

11. これらの利用条件に従わない参加者は、R&Sにより本コンペティションへの参加資格を剥奪される場合があります。その場合、賞品を遡って撤回することもできます。これらの利用条件に違反したために賞品が遡及的に取り下げられた場合、賞品はそれぞれの参加者の負担で「1.」に記載されているR&Sの住所に返送されるものとし、抽選で新たな賞品獲得者が選ばれることになります。

12. 参加者は本抽選の賞品を請求することはできず、この点に関して法的手段を講じることは許可されません。

13. 抽選およびR&Sとそれぞれの参加者との間に発生するいかなる契約上の関係も、法の抵触に頼ることなく、ドイツ法に準拠し、同法に従って解釈されるものとします。本競争への参加により直接的または間接的に生じた紛争については、ドイツのミュンヘンの裁判所が専属管轄権を有するものとします。

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.