Isolated probing system For oscilloscopes

The next ground breaking probe solution

Isolated probing system For oscilloscopes
ライトボックスを開く
Isolated probing system For oscilloscopes
ライトボックスを開く
Isolated probing system For oscilloscopes
ライトボックスを開く
Isolated probing system For oscilloscopes
ライトボックスを開く
R&S®isolated probe system for oscilloscope, application Image R&S®isolated probe system for oscilloscope, application Image R&S®isolated probe system for oscilloscope, front high R&S®isolated probe system for oscilloscope, back high

主な特長

  • 100, 200, 350, 500 MHz and 1 GHz bandwidth, upgradeable
  • > 90 dB CMRR at 1 GHz
  • ± 3000 V differential input range and offset
  • ± 60 kV common mode range
  • Dual connectivity with a Rohde & Schwarz probe interface and SMA connector

NEXT GENERATION GROUND BREAKING SOLUTION

With optical isolation

The R&S®RT-ZISO isolated probing system can tackle the challenge of measuring in high voltage and fast switching environments. The power-over-fiberoptic architecture galvanically isolates the device under test (DUT)for the highest possible common mode rejection ratio (CMRR) at up to 1 GHz. The complete systems compensate thermal drifts and gain-errors for the highest possible uncompromising signal fidelity .

特長と利点

For fast common mode probing challenges

The R&S®RT-ZISO isolated probing system suppresses interference from fast common mode signals with optical isolation for a CMRR of > 90 dB at 1 GHz. This helps with high-side gate measurements on complementary switching circuits especially wide bandgap devices.

  • 1 GHz > 90 dB
  • 500 MHz > 100 dB
  • 100 MHz > 115 dB
  • 1 MHz > 145 dB

ライトボックスを開く

Isolation limit CM noise loop formation in the system.

Probe tips matter

The R&S®RT-ZISO comes in a variety of probe tips and the MMCX probe tip is the most important one for CMRR performance. Different connector types such as square pins and wide square pins are also supported with different attenuation ratios. The probe tip cables are long and formable for allow easy access to aa probe point with minimal mechanical stress.

ライトボックスを開く

Formable probe tips with different connectors and browser probe.

Hassle-free setup with Rohde & Schwarz oscilloscopes

Using the R&S®RT-ZISO with the Rohde & Schwarz probe interface on our oscilloscopes creates a seamless experience. The instrument detects and sets up the probe tip information. Offset and range control can be easily configured on the instrument. Users can also easily use all Rohde & Schwarz oscilloscope functions and features such as fast acquisition and responsive FFT in their measurements.

ライトボックスを開く

Seamless connection for control with a Rohde & Schwarz oscilloscope

Investment protection

When using R&S®RT-ZISO isolated probe systems, users can connect to any oscilloscope with a BNC or SMA interface. Investment in instruments can be based on performance needs. R&S®RT-ZISO lets bandwidth be upgraded based on future needs. 

ライトボックスを開く

Future bandwidth upgrade possible with the R&S®RT-ZISO

Safely measure, securely operate

The R&S®RT-ZISO complies with CAT III 1000V safety ratings. The material and mechanical structures comply with IEC/EN 61010-31 covering hand-held probe assemblies for electrical measurements. 

  • CAT III 1000V safety rating
  • Safe attach on probe tips
  • Class 1 laser safety

ライトボックスを開く

Safe attach lets you safely swap out probe tips

利用可能なオプション

Probe tips
プロダクト
概要
R&S®ZISO-Z101

注文番号 1803.4100.02

概要

MMCX probe tip with 1.5x, 8 Vrms, ±45 Vpk , 50 Ω, 1000 V CAT III

Tip length with 36 cm (14 inch)

R&S®ZISO-Z201

注文番号 1803.4200.02

概要

R&S®MMCX probe tip with 10x, 300 Vpk, 10 MΩ, 1000 V CAT III

Tip length with 21 cm (8 inch)

R&S®ZISO-Z202

注文番号 1803.4300.02

概要

Square pin probe tip with 25x, 750 Vpk, 10 MΩ, 1000 V CAT III

Tip length with 32 cm (12 inch)

R&S®ZISO-Z203

注文番号 1803.4400.02

概要

Wide square pin probe tip with 100x, 3000 Vpk, 10 MΩ, 1000 V CAT III

Tip length with 38 cm (15 inch)

R&S®ZISO-Z301

注文番号 1803.4500.02

概要

Isolated browser tip with 10x, 300 Vpk, 10 MΩ, 300 V CAT III

Tip length with 120 cm (47 inch)

R&S®ZISO-Z302

注文番号 1803.4600.02

概要

Isolated browser tip with 100x, 3000 Vpk, 100 MΩ, 1000 V CAT III

Tip length with 120 cm (47 inch)

Cables
プロダクト
概要
R&S®ZISO-B403

注文番号 1804.5017.02

概要

3 meter (10 foot) optical fiber cable 

installed and calibrated with base unit when ship

R&S®ZISO-B410

注文番号 1804.5023.02

概要

10 meter optical fiber cable (33 feet)

installed and calibrated with base unit when shipped

Bandwidth options
プロダクト
概要
R&S®ZISO-B901

注文番号 1804.5030.02

概要

100 MHz bandwidth option

installed and calibrated with base unit when shipped

R&S®ZISO-B902

注文番号 1804.5046.02

概要

200 MHz bandwidth option

installed and calibrated with base unit when ship

R&S®ZISO-B903

注文番号 1804.5052.02

概要

350 MHz bandwidth option

installed and calibrated with base unit when ship

R&S®ZISO-B905

注文番号 1804.5069.02

概要

500 MHz bandwidth option

installed and calibrated with base unit when shipped

R&S®ZISO-B910

注文番号 1804.5075.02

概要

1 GHz bandwidth option

installed and calibrated with base unit when shipped

リクエスト情報

ご質問や詳細な情報のご要望などがございましたら、こちらのフォームよりお気軽にお問い合わせください。担当者よりご連絡させていただきます。

マーケティング・パーミッション

お問い合わせ内容が送信されました。 後ほどご連絡致します。
An error is occurred, please try it again later.
一般および法的情報

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

抽選キャンペーン「10 YEARS ROHDE & SCHWARZ OSCILLOSCOPES」に関する利用条件

1. 抽選キャンペーン「10 YEARS ROHDE & SCHWARZ OSCILLOSCOPES」(以降、「抽選」と呼びます)は、Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0(以降、「R&S」と呼びます)によって主催されます。

2. すべての参加者は、2020年1月1日から2020年12月31日までの期間中に、参加者の氏名、会社名、ビジネス用メールアドレスを入力することで抽選への参加登録を行えます。

3. 参加は無料です。商品またはサービスの購入経験の有無は問いません。

4. 抽選は法人のみを対象としており、賞品獲得者は法人に限られます。個人の場合、自分の名前と自分のアカウントによる参加は認められませんが、法人の名前で、その法人の代理として参加フォームを提出することにより、法人の代表として参加することが可能です。

5. 賞品として、2020年1月1日から2020年12月31日までの期間内に、R&S®RTB2000 10台のうちの1台を獲得できます。

賞品:R&S®RTB2000 デジタル・オシロスコープ

6. 抽選は、ローデ・シュワルツ本社、Muehldorstrasse 15, 81671 Munichで行われます。賞品獲得者には、5営業日以内にメールでお知らせいたします。

7. 法人の正式な代表者が、賞品受け取りの意向をローデ・シュワルツに通知するものとします。受け取り辞退が発生した場合、または2週間以内に返事がない場合は、新たな賞品獲得者が抽選によって選ばれます。4週間以内に賞品獲得者を決定できない場合、抽選は終了し、賞品は没収となります。

8. R&Sの従業員とその家族、および抽選処理の関係者とその家族は、参加フォームへの記入対象から除外されます。

9. 賞品の現金同等物または交換は許可されていません。賞品は譲渡できません。参加者の国で課されるすべての税金、徴収金、関税、手数料、およびその他の料金は、参加者が負担するものとします。

10. 個人データは、本抽選キャンペーンの目的でのみ処理され、別段の合意がない限り、抽選から4週間後に削除されます。

11. これらの利用条件に従わない参加者は、R&Sにより本コンペティションへの参加資格を剥奪される場合があります。その場合、賞品を遡って撤回することもできます。これらの利用条件に違反したために賞品が遡及的に取り下げられた場合、賞品はそれぞれの参加者の負担で「1.」に記載されているR&Sの住所に返送されるものとし、抽選で新たな賞品獲得者が選ばれることになります。

12. 参加者は本抽選の賞品を請求することはできず、この点に関して法的手段を講じることは許可されません。

13. 抽選およびR&Sとそれぞれの参加者との間に発生するいかなる契約上の関係も、法の抵触に頼ることなく、ドイツ法に準拠し、同法に従って解釈されるものとします。本競争への参加により直接的または間接的に生じた紛争については、ドイツのミュンヘンの裁判所が専属管轄権を有するものとします。

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.