14 결과
지난 10년간 ADC(Analog-to-Digital Converter)의 속도와 정확성은 크게 발전하였습니다. 이러한 기기는 빠른 영상 처리와 SDR(Software Defined Radio) 애플리케이션에 적용 가능하며, 매우 높은 중간 주파수(IF)에서 디지타이징을 수행합니다. 이에 따라 특히 테스트 셋업에 사용하는 아날로그 입력 신호 및 샘플 클록 소스의 노이즈 성능과 관련하여 ADC 테스트 장비에 대한 기대치가 훨씬 높아졌습니다. R&S®SMA100B는 하나의 기기로 ADC의 아날로그 입력 신호와 클록 입력 신호 양쪽 모두에 대해, 뛰어난 출력 신호 품질을 제공합니다.
1월 11, 2021 | AN-번호 1GP66
R&S®VISA는 PC 애플리케이션에서 네트워크상에서 감지되는 다양한 T&M 기기의 다양한 인터페이스를 통한 빠른 통신을 구현하는 표준화된 소프트웨어 라이브러리입니다. R&S®VISA에는 복수의 애플리케이션과 T&M 기기 사이의 통신을 동시에 모니터링하는 추적 툴이 포함되어 있으며, 효율적 필터를 이용한 특정 항목 분석도 가능합니다.
5월 26, 2020 | AN-번호 1DC02
Miloslav Macko 1MA196 1MA196, Forum, Application, Instrument, Remote, Control, Python, Scripting, R&S Forum, RS Forum, R&SForum, RSForum Using R&S®Forum Application for Instrument Remote Control R&S®Forum 애플리케이션을 사용한 기기 원격 제어 Miloslav Macko 1MA196 1MA196, Forum, Application, Instrument, Remote, Control, Python, Scripting, R&S Forum, RS Forum, R&SForum, RSForum Using R&S®Forum Application for Instrument
6월 28, 2018 | AN-번호 1MA196
로데슈바르즈 기기용 다목적 소프트웨어 툴RSCommander는 로데슈바르즈의 스펙트럼 분석기, 네트워크 분석기, 신호 발생기, 오실로스코프에서 사용하는 다목적 소프트웨어 툴입니다. 이 소프트웨어는 기기를 자동으로 검색하고 스크린샷 캡처나 트레이스 읽기, 파일 전송과 같은 작업과 간단한 스크립트를 생성시 사용할 수 있습니다.
12월 24, 2017 | AN-번호 1MA074
가전, 차량, 조명과 같은 일상 사물의 점점 더 많은 인터넷 연결이 "사물 인터넷"을 형성합니다. 옷 속에 설치된 바이탈 측정 센서도 인터넷에 연결되어 클라우드 서비스로 데이터를 전송할 수 있습니다. 이러한 사물들은 각각 다양한 무선 기술 표준을 통해 연결됩니다. 가장 중요한 표준 중 하나는 보편화된 Bluetooth (또는 Bluetooth Low Energy)입니다. Bluetooth 기능을 탑재한 신제품을 출시할 경우 Bluetooth SIG에서 정의한 인증 프로세스를 성공적으로 완료해야 합니다. 인증 프로세스에서의 시간과 비용을 절감하기 위해 개발 단계에서의 성능 테스트 진행이 필요합니다. 이 애플리케이션 노트는 R&S CMW 플랫폼을 사용하여 Bluetooth test specification version 5에 정의된 측정을 수행하는 방법을 설명합니다. 또한 대체 측정 솔루션으로 스펙트럼 분석기 및 신호 발생기를 이용한 거의 모든 측정 수행 방법에 대해서도 다룹니다.Bluetooth® 워드 마크와 로고는 Bluetooth SIG, Inc.의 등록 상표이며, 로데슈바르즈는 라이선스 하에 해당 마크를 사용하고 있습니다.
6월 19, 2017 | AN-번호 1MA282
이 애플리케이션 노트는 MathWorks MATLAB에서 로데슈바르즈 기기를 원격 제어하는 두 가지 방식에 대해 살펴봅니다.첫 번째는 VISA 연결과 다이렉트 SCPI 명령을 사용하는 방법입니다.두 번째 방식은 로데슈바르즈 VXI Plug&Play 기기 드라이버와 MATLAB Instrument Control 툴박스를 이용합니다.
6월 12, 2017 | AN-번호 1MA171
R&S®CMW 및 R&S®CMWrun에 기반한 로데슈바르즈 Bluetooth RF 테스트 솔루션은 Bluetooth RF Test Suite 솔루션과 밀접하게 연계됩니다.외부 컴퓨터에서 실행하는 R&S®CMWrun을 통해 원격으로 제어하는 단일 CMW에 테스트 장비를 연결하면 다양한 테스트를 수행할 수 있습니다. 일부 테스트는 추가적으로 신호 발생기가 필요합니다. 이 문서는 이러한 테스트의 일반 설정과 필요한 구성에 대해 설명합니다.
5월 04, 2015 | AN-번호 1MA261
이 애플리케이션 노트는 R&S®ZVA Network Analyzer, 1대 또는 2대의 R&S®SMB100A Signal Generator, R&S®FSW Signal Analyzer를 사용하여 임베디드 로컬 오실레이터가 포함된 주파수 컨버터의 모든 주요 파라미터를 정확하게 측정하는 방법에 대해 설명합니다. 상용 위성 Up-Converter를 DUT로 사용하는 측정 예제를 보여드립니다.
4월 30, 2015 | AN-번호 1MA224
이 애플리케이션 노트는 IVI HiSLIP(High Speed LAN Instrument Protocol) 및 해당 기능에 대해 소개합니다. HiSLIP는 VXI-11 LAN 원격 제어 프로토콜의 후속 프로토콜입니다. 이 문서는 또한 이 프로토콜의 사용 지침에 대해서도 설명합니다.
11월 12, 2014 | AN-번호 1MA208
The aim of this application note is to provide information regarding Rohde & Schwarz instrument drivers. This paper shall help application engineers and software developers to easily get an understanding of advanced techniques to develop test and measurement (T&M) applications by utilizing Rohde & Schwarz instrument drivers. Furthermore the nomenclature used for Rohde & Schwarz instrument drivers will be explained.
Jan 01, 2013 | AN-번호 1MA153
The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.
Dec 20, 2012 | AN-번호 1MA035
The R&S®SMB100A RF and microwave signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMB100A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.
Mar 20, 2012 | AN-번호 1GP89
This Application Note describes a software program that provides easy creation and transfer of Pulse Trains between a PC and the R&S SMB100A, R&S SMA100A and R&S SMF100A analog signal generators with the Pulse Train option; or between a PC and the ARB of R&S SMBV100A, R&S SMJ100A or R&S SMU200A vector signal generators.
May 10, 2011 | AN-번호 1MA148
Signal generators are often used in automated test environment applications. The replacement of those instruments, e.g., due to malfunction or standard replacement procedures requires special care to be taken in consideration. Replacement of those instruments requires compabitiblity between the replacement and the replaced device in at least the electrical and remote-control features. This application note describes in detail how to use the emulation modes of the R&S® series SMA100A, SMB100A, SMF100A signal generators.
Jun 24, 2008 | AN-번호 1GP71