8232 결과
3GPP FDD and LTE Multicell and Multi-UE Scenarios with the R&S<sup>®</sup>SMU200A Signal Generator
8월 10, 2011 | AN-번호 1GP80
R&S ZVR Vector Network Analyzer를 이용한 4포트 측정
7월 28, 1998 | AN-번호 1EZ25
이 문서는 추가 측정을 위해 RF 펄스를 복조하고 RF 펄스를 정밀 트리거 및 분석하기 위해 R&S®RTO 및 R&S®RTP를 사용하는 방법에 대해 설명합니다.
3월 13, 2019
R&S®FSW, R&S®FSQ, R&S®FSG, R&S®FSV Signal Analyzer를 사용하여 다목적 RF Fading Simulator를 쉽게 구축할 수 있습니다.
2월 27, 2015 | AN-번호 1MA145
WiMAX - General information about the standard 802.16
Jun 13, 2006 | AN-번호 1MA96
이 애플리케이션 노트에서는 R&S®의 두 가지 테스트 솔루션(R&S®RTP/RTO Oscilloscope 또는 R&S®NRQ6 Frequency Selective Power Sensor)을 사용하여 5G FR1 다운링크 MIMO 신호 분석 과제에 대응하는 방법에 대해 설명합니다.
6월 26, 2020 | AN-번호 GFM343
WLAN 표준에서 개정된 802.11ad는 60GHz 대역에서 매우 높은 전송률(Very High Throughput: VHT) 달성을 위한 MAC 및 PHY 계층을 정의합니다. 이 애플리케이션 노트는 주요 802.11ad 파라미터에 대해 간략히 살펴보고 필요한 측정과 테스트 셋업에 대해 설명하며, OTA(Over-the-Air) 측정시 중요한 몇 가지 권장 사항을 안내합니다.
5월 17, 2017 | AN-번호 1MA260
The R&S ® RTB2000 digital oscilloscope lets you share your scope’s display with any computer/projector via LAN or Internet.
3월 21, 2017
R&S Scope Rider는 배터리로 동작하는 휴대 기기의 견고함을 연구소 측정장비 수준의 성능과 함께 휴대형 크기로 제공하는 최신형 다목적 핸드헬드 오실로스코프입니다.
1월 04, 2016
이 애플리케이션 노트는 R&S®Pulse Sequencer 소프트웨어에 대해 소개하고 실제같은 RF 신호 환경 생성을 위해 필요한 단계에 대해 살펴봅니다.
1월 17, 2017 | AN-번호 1MA288
이와 같은 보조 기능으로 인한 방출은 불규칙적으로 나타나기 때문에 근본 원인을 찾고 이를 해결하는 것이 어렵습니다. 불규칙적 이벤트를 효율적으로 찾으려면 매우 빠른 FFT 분석 기능을 탑재한 기기가 필수적입니다.
3월 03, 2023
Automatic monitoring of radio signals interfering with sensitive devices in hospitals
9월 04, 2006
To generate a full channel load, as necessary for DVB-C2 receiver tests for example, only two Rohde & Schwarz instruments, the R&S BTC and R&S CLG, are necessary.
7월 30, 2013 | AN-번호 7BM88
대용량의 세그먼트 메모리와 전용 트리거 조건을 결합하여 길게 정지하지 않고 관련 시퀀스를 수집하는 방식으로 이 문제를 해결합니다.
12월 01, 2017
The R&S®ZNH handheld vector network analyzer helps field engineers quickly and reliably maintain radar systems to minimize downtimes.
10월 22, 2020
The ATC world is standing before a game changing development in voice communications infrastructure.
11월 02, 2011
이 애플리케이션 노트는 다양한 유형의 테스트 포트 어댑터와 해당 파라미터, 호환성 및 용도에 대해 살펴봅니다.
4월 28, 2015 | AN-번호 1MA100
Using R&S®ELEKTRA Migration Tool
The R&S®ELEKTRA EMC test software is the successor of the R&S®EMC32 EMC measurement software. Like the R&S®EMC32 EMC measurement software, the R&S®ELEKTRA offers a solution that controls complete EMC systems and automates measurements on equipment under test (EUT) that is being tested for emissions (EMI) and immunity (EMS) compliance. It has more features and test types compared to R&S®EMC32.As both software platforms use different file formats, R&S®EMC32 users who upgrade their existing software to the R&S®ELEKTRA platform need to perform a file conversion before migrating their data to the R&S®ELEKTRA platform. This is done by using the R&S®ELEKTRA Migration Tool, which is installed automatically with each R&S®ELEKTRA installation.This Application Note describes how to use the R&S®ELEKTRA Migration Tool (version 4.4 onwards) for converting the backup data into the XML format that can be interpreted by the R&S®ELEKTRA software. It also provides recommended conversion steps (Chapter 5) and troubleshooting tips (Chapter 6). For instructions on migrating the data using R&S®ELEKTRA Migration Tool below version 4.4, refer to the R&S®ELEKTRA user manual. For better user experience, we recommend using the latest software version for migration.This Application Note does not describe the steps to backup data using the R&S®EMC32 or R&S®ES-SCAN software. For procedures on how to do so, refer to their respective manuals.
May 04, 2023 | AN-번호 1SL396
This application note explains how to convert different Rohde&Schwarz I/Q file formats among each other using the supplied software tool.
9월 23, 2015 | AN-번호 1EF85