R&S®FE110SR Frontend

SUB-TERAHERTZ, ABOVE EXPECTATIONS

R&S®FE110SR Frontend
라이트박스 열기
R&S®FE110SR Frontend
라이트박스 열기
R&S®FE110SR Frontend
라이트박스 열기
R&S®FE110SR Frontend
라이트박스 열기
R&S®FE110SR Frontend
라이트박스 열기
R&S®FE110SR Frontend
라이트박스 열기
R&S®FE110SR Frontend, Front Low R&S®FE110SR Frontend, Back low R&S®FE110SR Frontend, Side view R&S®FE110SR Frontend, Side view R&S®FE110SR Frontend, Side view R&S®FE110SR Frontend, Side view

주요 사항

  • Fully calibrated solution
  • Ease of operation
  • Fully automated
  • Smart accessories
  • Compact form factor

Frequency extension to 110 GHz

The R&S®FE110SR is ideal for demanding applications up to 110 GHz. Once connected, the frequency range of the R&S®FSW signal and spectrum analyzer and the R&S®RTP  oscilloscope are extended to the W-Band frequency range (70 GHz to 110 GHz). The easy-to-use, fully-calibrated solution is compatible with our analyzer and oscilloscope environments. Plug it in and start designing and testing the next generation automotive radar or mobile communications today.

기능 및 장점

Fully calibrated solution

The R&S®FE110SR is designed as an external frontend for the R&S®FSW signal and spectrum analyzer and the R&S®RTP oscilloscope. Every R&S®FE110SR is fully characterized during production. As soon as the R&S®FE110SR is connected via LAN, the correction data stored in the frontend is automatically transferred to the base unit. This ensures a fully calibrated  solution. and reduces the time and equipment needed for setup and calibration while enhancing measurement fidelity.

라이트박스 열기

R&S®FSW with connected frontend

Ease of operation

The R&S®FE110SR fits seamlessly into the operating concept of the R&S®FSW signal analyzer and R&S®RTP oscilloscope. Only three connections (LAN, IF and REF frequency) between frontend and base units are required. Setting up automated measurements is easy and reliable because multiple instruments do not need to be programmed. 

라이트박스 열기

Excellent signal performance

Generating wideband-modulated signals with excellent modulation quality is essential when developing products for next generation automotive radar or mobile communication. The R&S®FE110SR has outstanding modulation quality. A  5G NR signal with a channel bandwidth of 2 GHz (960 kHz SCS) and QPSK modulation can be analyzed with an EVM better than -39 dB (at 88 GHz). This excellent modulation quality is maintained over a wide dynamic range. 

라이트박스 열기

EVM values versus output power at different center frequencies

Smart accessories

External bandpass filters optimize spur performance and are available as options for the R&S®FE110ST and R&S®FE110SR. The R&S®FE110-Zxx waveguide bandpass filters have low insertion loss and an excellent voltage standing wave ratio. Device characteristics are stored on an EPROM. A cable connection provides data to the base instruments. This data is automatically considered by the base units for a fully calibrated solution.

라이트박스 열기

FE110SR with connected bandpass filter FE110-Zxx

Compact form factor

The compact design allows the R&S®FE110ST to be positioned closely to the device under test. This minimizes the length of additional RF feed lines that can increase losses. Short distance to the DUT reduces the level ripple over frequency and improves signal quality. The R&S®ZZA-FE01 frontend height adjustement has adjustable feet and versatile mounting points which allow flexible positioning of the R&S®FE110ST in a chamber.  

라이트박스 열기

Mounted frontend with R&S®ZZA-FE01 frontend height adjustement

Multichannel analysis

For multichannel test setups, connect up to four R&S®FExx modules to the R&S®RTP oscilloscope. Select between “Coupled LO” or “Coupled Ref” signal to sychronize the external Frontend modules. Perform your multichannel signal analysis based on the IQ data of the R&S®RTP-K11 IQ SW interface option or with dedicated analysis options of the R&S®VSE analysis software such as the R&S®VSE-K146 5G MIMO measurement option.

라이트박스 열기

R&S®RTP oscilloscope with two R&S®FE110SR modules

사용 가능한 옵션

External accessories
산물
설명
R&S®FE110-Z01

주문 번호 1348.5147.02

설명

Bandpass filter

External bandpass filter (75–90 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z02

주문 번호 1348.5153.02

설명

Bandpass filter

External bandpass filter (80–95 GHz) for the R&S®FE110ST and R&S®FE110SR 
 

R&S®FE110-Z03

주문 번호 1348.5160.02

설명

Bandpass filter

External bandpass filter (85–105 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z04

주문 번호 1348.5199.02

설명

Bandpass filter

External bandpass filter (94-110 GHz) for the R&S®FE110ST and R&S®FE110SR 
 

R&S®FE110-Z10

주문 번호 1348.5230.02

설명

Bandpass filter

External bandpass filter (70-86 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z11

주문 번호 1348.5247.02

설명

Bandpass filter

External bandpass filter (76-92 GHz) for the R&S®FE110ST and R&S®FE110SR

R&S®FE110-Z12

주문 번호 1348.5253.02

설명

Bandpass filter

External bandpass filter (82-98 GHz) for the R&S®FE110ST and R&S®FE110SR
 

R&S®FE110-Z13

주문 번호 1348.5260.02

설명

Bandpass filter

External bandpass filter (88-104 GHz) for the R&S®FE110ST and R&S®FE110SR
 

R&S®FE110-Z14

주문 번호 1348.5276.02

설명

Bandpass filter

External bandpass filter (100-115 GHz) for the R&S®FE110ST and R&S®FE110SR

R&S®FE110-Z20

주문 번호 1348.5224.02

설명

WR10 waveguide-to-waveguide adapter

Waveguide section straight. Length: 40mm

R&S®WCA110

주문 번호 3626.1067.02

설명

Waveguide Coax Adapter, WR10 to 1 mm (f)

75 GHz to 110 GHz

R&S®WCA110

주문 번호 3626.1067.03

설명

Waveguide Coax Adapter, WR10 to 1 mm (m)

75 GHz to 110 GHz

R&S®WTA-110

주문 번호 3593.3980.02

설명

Waveguide Tunable Attenuator

75 GHz to 110 GHz, WR10 Waveguide

R&S®SGH110G20

주문 번호 1537.3262.02

설명

Standard gain horn antenna

75 to 110 GHz, 20 dBi Connector waveguide WR10 

R&S®SGH110G25

주문 번호 1538.5852.03

설명

Standard gain horn antenna 

75 to 110 GHz, 25 dBi Connector waveguide WR10

Mechanical accessories
산물
설명
R&S®ZZA-FE01

주문 번호 1348.5330.02

설명

Frontend height adjustment

Height adjustment and mounting kit for external frontends. 
Horizontal or vertical assembly possible.

Tools
산물
설명
R&S®ZCTW

주문 번호 1175.2014.02

설명

Torque wrench for waveguide flange screws

Related videos

Towards 6G: MIMO measurements up to 110 GHz

This video demonstrates signal transmission and analysis of a 2x2 MIMO signal at 90 GHz.

3월 12, 2024

Noise Figure and Gain Measurements of amplifiers from 75 GHz to 110 GHz

This video shows how to measure noise figure and gain of an amplifier at around 90 GHz using the smart noise source R&S FS-SNS110 and the external frontend R&S FE110SR in combination with a spectrum analyzer.

3월 11, 2024

Signal generation and analysis up to 110 GHz with frontends

This video shows the excellent signal performance and the support of swept measurements and local oscillator coupling of the FE frontend series.

3월 11, 2024

정보 요청

추가 문의 사항이나 추가 정보가 필요하십니까? 이 양식에 맞춰 내용을 입력해 주시면 회신 드리겠습니다.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.