144 결과
이 애플리케이션 노트는 I2S 인터페이스 R&S®UPP-B2 및 R&S®UPV-B41를 로직 전압이 3.3 V가 아닌 DUT에 연결할 때 사용할 수 있는 디지털 레벨 시프터를 제안합니다.
3월 27, 2020 | AN-번호 1GA71
Jun 11, 2024
Rohde & Schwarz presents R&S RT-ZISO isolated probing system for precise measurements of fast switching signalsRohde & Schwarz has developed the R&S RT-ZISO isolated probing system for extremely accurate measurements of fast switching signals, especially in environments with high common-mode voltages and currents.
Jun 07, 2023
Rohde & Schwarz presents first automated solution to speed up PCIe 5.0 and 6.0 cable and connector compliance testingFor precise and time-saving compliance testing of the latest generation PCIe 5.0 and 6.0 cables and connectors in line with PCI-SIG specification, Rohde & Schwarz presents a new R&S ZNrun test automation option. The solution reduces testing times for PCIe x8 cables to just a few minutes for complete test runs. By comparison, manual testing takes several hours and involves major risk of connection errors by test engineers.
Sep 15, 2023
Rohde & Schwarz and IMST demonstrate active antenna array OTA-testing for satellite terminals at the EuMW 2023Rohde & Schwarz and IMST showcase OTA measurements of electrically large beamforming antenna arrays for SATCOM applications at EuMW 2023.
R&S®SMW200A Vector Signal Generator는 DUT(Device under Test)의 디임베딩이 필요한 고정밀 RF 및 Microwave 테스트에 적합합니다.
10월 11, 2017
ENV216 - DC-DUT(예: 12 V 또는 24 V)와 함께 사용하는 방법
ZNA만의 DUT 중심 운용 로데슈바르즈의 R&S®ZNA Vector Network Analyzer는 사용자 친화적 DUT 중심 작업을 지원합니다. DUT 중심 모드에서는 가장 먼저 사용자가 DUT 타입(예: 증폭기 또는 믹서)을 선택합니다. 그런 다음 기기에 표시되는 단계별 메시지에 따라 원하는 측정을 선택 및 구성합니다. 로데슈바르즈의 R&S®ZNA Vector Network Analyzer는 사용자 친화적 DUT 중심 작업을 지원합니다. DUT 중심 모드에서는 가장 먼저 사용자가 DUT 타입(예: 증폭기 또는 믹서)을 선택합니다. 그런 다음 기기에 표시되는 단계별 메시지에 따라 원하는 측정을 선택 및 구성합니다.
Feb 22, 2024
Rohde & Schwarz and MediaTek to showcase 5G NTN-NR Rel.17 connection at MWC 2024Rohde & Schwarz and MediaTek have teamed up to demonstrate a 5G non-terrestrial network (NTN) new radio (NR) connection based on the latest 3GPP Release 17 specifications at this year's Mobile World Congress in Barcelona.
R&S®ZNB는 독자적인 DUT 중심 개념으로 운용합니다. 즉, DUT와 해당 특성을 중심에 놓고 손쉽게 측정을 설정할 수 있습니다. R&S®ZNB는 독자적인 DUT 중심 개념으로 운용합니다. 즉, DUT와 해당 특성을 중심에 놓고 손쉽게 측정을 설정할 수 있습니다. Vector network analyzer ZNB, Test and Measurement, Network analyzers, network analysis, ZNB 벡터 네트워크 분석기는 전자제품 및 이동통신 산업에 필요한 넓은 다이내믹 레인지, 낮은 트레이스 노이즈, 높은 출력 특성을 제공합니다.
Connection of DUT and Link partner with test fixture RT-ZF2
R&S®ZNL은 간편한 셋업으로 네트워크 분석 및 스펙트럼 분석을 통해 다양한 DUT를 특성분석할 수 있는 합리적인 솔루션입니다.
12월 17, 2021
The R&S VTC/VTE video testers analyze and evaluate the quality of set-top boxes and TVs on the DUT’s A/V interfaces from a user perspective.
2월 04, 2014
본 백서는 DUT(Device under Test)에서 발생한 Intermodulation과 스펙트럼 분석기 내부에서 발생한 Intermodulation 간 상호 작용에 대해 설명합니다.
11월 29, 2012 | AN-번호 1MA219
Dec 04, 2023
Rohde & Schwarz is first to deliver a 5G FR1 A-GNSS OTA test solution approved by CTIA CertificationThe R&S TS8991 over-the-air (OTA) test system from Rohde & Schwarz is the first to be approved by CTIA Certification for testing 5G A-GNSS antenna performance. This solution measures the performance of the global navigation satellite system (GNSS) receiver in a wireless device. This is critical because Assisted-GNSS is used for E911 emergency calls over 5G.
R&S EX-IQ-Box는 DUT(Device under Test)와 로데슈바르즈의 신호발생기, 신호분석기, 무선 통신 테스터 간 디지털 Baseband 인터페이스의 역할을 합니다.
5월 23, 2012 | AN-번호 1MA168
이 백서에서는 멀티포트 VNA를 이용한 고속 디지털 채널의 빠른 특성 분석을 시연합니다. VNA는 통신 및 신호 처리 부문에서 널리 쓰이는 분석 도구 입니다.
3월 18, 2020 | AN-번호 1EZ83_0E
Jan 04, 2024
Rohde & Schwarz leverages technology from Analog Devices to develop a wireless battery management system production test solutionAnalog Devices, Inc. (ADI) and Rohde & Schwarz are helping the automotive industry to adopt wireless battery management system (wBMS) technology which brings technical, environmental, and cost advantages compared with wired battery management systems (BMS). A new automated test solution is tailored for verification and mass production tests of wireless device tests. This development builds on existing efforts for wBMS RF robustness testing.
R&S®SMW200A RF/microwave DUT deembedding - Application Card
Testing S-Parameters on Pulsed Radar Power Amplifier Modules
4월 11, 2013 | AN-번호 1MA126
Marvell사의 1000BASE-T1 DUT에서 "교란 장치를 이용한 왜곡(Distortion with disturber)" 테스트 수행. 이 동영상에서는 Marvell사의 1000BASE-T1 DUT에서 "교란 장치를 이용한 왜곡(Distortion with disturber)" 테스트를 수행합니다. DUT는 PRBS 시퀀스인 Test Mode 4에서 작동하며, RTO6 오실로스코프에 통합된 B6 신호 발생기에서 출력되는 125MHz 교란 신호에 노출됩니다. ScopeSuite 소프트웨어는 사진과 함께 단계별 실행 안내를 제공하며 테스트 결과 보고서를 제공합니다.
ZNA 및 ZNB 제품군의 벡터 네트워크 분석기는 주파수 도메인에서 DUT(Device under Test)의 복잡한 S-파라미터의 크기와 위상을 측정할 수 있습니다.
7월 30, 2020 | AN-번호 1EP83
이 애플리케이션 노트는 DUT(Device under Test)에서 직접 스펙트럼 측정을 수행하기 위해 로데슈바르즈 네트워크 분석기를 구성하는 방법에 대해 설명합니다.
3월 16, 2012 | AN-번호 1EZ62
이 어플리케이션 노트는 ICU(Inline Calibration Units)로 구성된 새로운 Calibration Unit에 대해 살펴봅니다. ICU Calibration Unit은 In Situ용으로 설계되었기 때문에 교정 절차 또는 DUT(Device Under Test) 측정 수행 시 분리하지 않고 그대로 진행할 수 있습니다.테스트 시스템에서 DUT를 수동으로 분리하지 않고도 언제든지 교정 업데이트가 가능하기 때문에 VNA 기반 측정 시스템의 다목적성, 편의성, 정확성이 향상됩니다.
9월 29, 2017 | AN-번호 1EZ71
이 데모를 통해 테스트 송신기에서 DUT(테스트 장치)로 신호의 방향을 정확하게 컨트롤할 수 있는 테스트 셋업을 보여줍니다. CMP200 무선 통신 테스터는 ATS800R CATR 챔버를 통해, 정밀하게 생성된 Ultra-wideband 신호를 OTA(Over-the-Air) 방식으로 DUT에 전송합니다. 이 챔버는 차단 성능이 우수하며, 뛰어난 흡수성으로 통제된 RF 환경을 제공합니다. 또한 정밀 포지셔너를 포함하여, 브로드캐스트 안테나와 DUT(이 경우 NXP NCJ29D5) 사이에서 설정된 각도를 적용할 수 있습니다.
Jun 06, 2023
Automotive Testing Expo Europe 2023: Enabling the next level of ADAS with test & measurement solutions from Rohde & SchwarzAt Automotive Testing Expo Europe 2023 in Stuttgart, Rohde & Schwarz will demonstrate a wide range of cutting-edge test solutions that support automotive applications. With test solutions on show that cover automotive radar, Ethernet, 5G and UWB, the company enables the automotive industry to make the next level of autonomous driving reality.
Nov 28, 2023
Unique Rohde & Schwarz 170 GHz power sensors ease use and traceability in the D-bandRohde & Schwarz is launching the new R&S NRP170TWG(N) thermal power sensor for precise power level measurements in the D-band. It is the only RF power sensor on the market that offers full traceability to national metrology institutes (NMI) in the frequency range from 110 GHz to 170 GHz, an important prerequisite for commercializing the frequency band. The R&S NRP170TWG(N) hardware is designed to reduce measurement noise and drift, while remaining very accurate and easy to use. The sensors are fully calibrated plug & play devices that can be easily integrated into any measurement setup with a USB or LAN connection.
Apr 23, 2024
Rohde & Schwarz introduces new R&S SMB100B microwave signal generator for analog signal generation up to 40 GHzThe new R&S SMB100B microwave signal generator available up to 40 GHz brings excellent output power, spectral purity, very low close-in phase noise, and practically no wideband noise to analog microwave signal generation.