236 Results
This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA and GSM (GRPS and EGPRS(2)).
03-Nov-2015 | AN-No. 1MA194
Rohde & Schwarz offers the R&S®CMW500 radio communication tester and the R&S®CMW290 functional radio communication tester to meet different testing needs; R&S®CMWcards for C-IoT
15-Oct-2018
R&S®CMWcards is an intuitive and user-friendly software application that makes mobility verification easier than ever.
23-Jul-2019
R&S<sup>®</sup>CMW500 Digital IQ with CADENCE Emulator
30-Jun-2011 | AN-No. 1CM75
Video quality testing of automotive infotainment devices - Application Card
21-Feb-2018
R&S®CMWcards is an intuitive and user-friendly software application that makes NB-IoT OTDOA positioning design verification easier than ever.
26-Nov-2018
Functionality testing of automotive infotainment devices - Application Card
19-Feb-2018
Automotive mobility testing with R&S®CMWcards
09-Apr-2019
NB-IoT field-tolab testing with R&S®CMWcards
19-Feb-2019
Scenario based testing of C-V2X applications in lab and field environments
30-Jun-2022
Functional Testing
This application note focuses on different details of voice services in 5G networks. It also describes the procedure to setup a 5G network with radio communication testers.
06-Oct-2021 | AN-No. 1SL364
The R&S®SMBV100B delivers precise synchronization information for communications in C-V2X mode and very accurate position information to the device under test.
18-Nov-2019
Bluetooth® Low Energy channel sounding validation
06-Sep-2023
This application note describes the technology behind NG eCall and presents conformance tests for NG eCall using the R&S®CMW500 RF tester.
06-Jun-2019 | AN-No. GFM312
The topic of this application note is mobile phone measurements – in theory and in practice. It discusses measurements according to the most common standard in use today, GSM.
22-Aug-2014 | AN-No. 1MA231
This application note and associated application software may be used to conduct psychoacoustic speech quality evaluation for Voice over LTE (VoLTE) connections. The measurements are based on recommendations ITU-T P.862 and ITU-T P.863. The included software sequence performs decoder/encoder calibration, connection setup for the UE under test and subsequent speech quality analysis.
21-Feb-2014 | AN-No. 1MA204
Automotive field-to-lab testing with R&S®CMWcards
19-Feb-2019
This application Note is based on CMW500, SMBV100B and Vector CANoe.Car2x Software and guides to how to simulate the specific Cellular Vehicle-to-Everything (C-V2X) wireless environment in respect to road transport scenarios and transmitted messages around the Device Under Test (DUT) like a Telematics Control Unit (TCU). It shows how to verify and validate the C-V2X application of the DUT in laboratory environment. The virtual simulation scenario is not limited to the requirements of CSAE53-2017 specification, and it could be modified by user according to this operating guide with CANoe.Vehicle-to-everything (V2X) is a new generation of information and communications technologies that connect vehicles to everything. The objective of V2X is to increase road safety and manage traffic efficiently.C-V2X is designed to offer low-latency vehicle-to-vehicle (V2V), vehicle-to-roadside infrastructure (V2I) and vehicle-to-pedestrian (V2P) communications services to add a new dimension to future advanced driver assistance systems (ADAS). C-V2X as one communications standard defined by 3GPP in Release 14 uses LTE technology as the physical interface for communications. The standard describes two types of communications. The vehicle-to-network (V2N) communications type, exploits the cellular Uu interface, uses traditional cellular link to enable cloud services to be integrated into end-to-end solutions, e.g. to allow road and traffic information for a given area to be distributed to the vehicles.The second type is referred to as direct or PC5/Sidelink (V2V, V2I, V2P) communications, where data transmission takes place over the PC5 interface. In that type, C-V2X does not necessarily require a cellular network infrastructure. It can operate without a SIM and without network assistance and uses GNSS as its primary source for time synchronization.Verifying system functionality and performance exclusively by field testing in a real-world environment can be time-consuming, costly and very challenging. Requirements regarding functionality, and consequently the required assistance functions, are constantly changing. Due to this fact, test solutions are needed during the development and introduction phase to verify compliance with the standards. The PC5 direct communications type allows exchange of time sensitive and safety relevant information. Using a mobile communication tester like the R&S® CMW500 together with a C-V2X scenario simulation tool delivers reproducible test scenarios. This is essential for the standardization of verification processes for C-V2X in order to obtain reliable and comparable results, and it helps to demonstrate that end-to-end functionality between two C-V2X devices from different vendors works properly.
02-Jun-2021 | AN-No. GFM341
Bluetooth Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure
To ensure connectivity and trouble-free operation, each Bluetooth® enabled device has to be tested for conformance with Bluetooth SIG standards and regulatory requirements.
23-Nov-2017
This application note explains battery life tests using RT-ZVC in combination with CMWrun and CMW500, including example applications.
17-Feb-2017 | AN-No. 1MA281
cmw500-pt
cmw500-rf
CMW500_Overview
Test your eCall and ERA-Glonass system modules - The R&S CMW500 and R&S SMBV100A are the ideal team for testing your eCall and ERA-Glonass cellular modems and GNSS receivers in the lab.
02-May-2022
It is extremely important to test the application level functional performance of home automation products in the presence of interference.
11-May-2020
cmw500-rf
cmw500-pt
cmw500-pt