Key facts
Starting at 7 070 PLN1
The R&S®HMP2000 DC Power supplies are primarily designed for industrial uses, such as:
-production testing
-engineering labs
-maintenance
With two or three output channels and up to 10 A output current, these rugged instruments are ideal for a wide variety of applications. They offer high efficiency with low residual ripple and many protection functions.
You can now design R&S®HMP2000 DC Power supplies to fit your needs quickly and with full price transparency and send a purchase request to the distribution partner of your choice directly through Rohde & Schwarz. Discover our product configurator and current promotions by clicking "Configure and quote".
The output channels can be configured in parallel for higher output current, or in series for higher output voltage.
All settings and operating states are clearly visualized.
| Electrical specifications | |
| Number of output channels | 2/3 |
| Total output power | max. 188 W |
| Maximum output power per channel | 80 W; except R&S®HMP2020, CH1: 160 W |
| Output voltage per channel | 0 V to 32 V |
| Maximum output current per channel | 5 A; except R&S®HMP2020, CH1: 10 A |
| Voltage ripple and noise (20 Hz to 20 MHz) | < 1.5 mV (RMS) (meas.) |
| Current ripple and noise (20 Hz to 20 MHz) | < 1 mA (RMS) (meas.) |
| Load recovery time (10 % to 90 % load change within a band of ± 20 mV of set voltage) | < 1 ms (meas.) |
| Programming resolution voltage | 1 mV |
| Programming resolution current | < 1 A: 0.1 mA (10 A CH: 0.2 mA) ≥ 1 A: 1 mA |
| Output measurements | |
| Readback resolution voltage | 1 mV |
| Readback resolution current | < 1 A: 0.1 mA (10 A CH: 0.2 mA) ≥ 1 A: 1 mA |
| Readback accuracy voltage ± (% of output + offset) | < 0.05 % + 5 mV |
| Readback accuracy current ±(% of output + offset) | < 0.1 % + 2 mA |
| Special functions | |
| Measurement functions | Voltage, current |
| Protection functions | OVP, OCP, OTP |
| FuseLink function | ● |
| Fuse delay at output-on | ● |
| Sense function | ● |
| Sink mode | - |
| Output sequencing | - |
| Trigger input/output | - |
| Arbitrary function | ● (EasyArb) |
| Analog/modulation interface | - |
| Data logging | - |
| Display and interfaces | |
| Display | 240 × 64 pixel LCD |
| Rear panel connections | Connector block with 4 lines per channel |
| Remote control interfaces: optional | USB, LAN, IEEE-488 (GPIB), RS-232 |
| General data | |
| Dimensions (W × H × D) | 285 mm × 93 mm × 405 mm |
| Weight | 7.8 kg/8.0 kg |
| Rack installation | R&S®HZ42 option |
Dual Interface (RS-232/USB)
IEEE-488 (GPIB) Interface
Ethernet/USB Dual Interface
for HMF, HMO, HMP, HMS series
Related products
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
