2118 Results
The Freerider backpack system generation 4 is a compact, lightweight solution for walk test and drive test campaigns. Supporting up to 12 test mobile phones and high-performance scanner measurements (including 5G millimeterwave and LTE 4x4 MIMO), it is ideal for network optimization, benchmarking and cellular network analysis.
Be ahead in 5G. Turn visions into reality. 5G mmWave test solutions - Flyer
The R&S®ESR is an EMI test receiver for the frequency range from 10 Hz to 26.5 GHz and complies with the CISPR 16-1-1 standard. The receiver measures electromagnetic disturbances with the conventional stepped frequency scan or – at an extremely high speed – with an FFT based time domain scan.
Introduction to Attribute Based Instrument Drivers
01-Dec-2012 | AN-No. 1MA170
This application note describes two test solutions from R&S® to cope with the 5G FR1 downlink MIMO signal analysis challenges either using R&S®RTP/RTO oscilloscope or R&S®NRQ6 frequency selective power sensor.
26-Jun-2020 | AN-No. GFM343
The tests were carried out at an airfield near the Airbus facility in Friedrichshafen, Germany, where the test crew assessed the RIME instrument's 16.6 m antenna in various flight configurations. A helicopter lifted a mock up of the space probe up to 320 meters in the air. The mock-up housed the transmitter, while the two test receivers, each with an RF receive antenna, remained on the ground.
We discuss key test challenges and present methods and tools for debugging digital designs including high-speed interfaces with a data rate of up to 5 Gbps. We discuss key test challenges and present methods and tools for debugging digital designs including high-speed interfaces with a data rate of up to 5 Gbps.
This video shows how to measure the noise figure and gain measurements of an amplifier under test using a noise source. This video shows how to measure the noise figure and gain measurements of an amplifier under test using a noise source.
Compensate signal losses from test fixtures or cables in real-time.
Smartly verify and decode Bluetooth® Low Energy (BLE) transmit signals with a reliable and costefficient spectrum analyzer – the R&S®FPC.
17-May-2018
This white paper describes the interaction between intermodulation products generated by a device under test (DUT) and intermodulation products generated internally in a spectrum analyzer.
29-Nov-2012 | AN-No. 1MA219
This application note explains step by step all necessary settings for transmitting parameters of the disturbance signal from an EMS test to a dAV Camera System via serial port or LAN interface
10-Dec-2019
This document describes the critical parameters and provides step-by-step procedures for the configuration.
08-Dec-2015 | AN-No. 1C106
Rohde & Schwarz mobile network testing provides a unique combined test solution that accurately measures the DL coverage using network scanners.
20-Feb-2018
R&S TS-PIO4 Digital Functional Test Module - Product Brochure
The R&S®ExpressTSVP concept represents true innovation in state-of-the-art PC based instrumentation while offering traditional capabilities found in high-performance ATE systems. The versatile platform accelerates the adoption of industry standard CompactPCI® Express and PXI ExpressTM as well as CompactPCI® and PXI-1 in all major fields of industrial test and measurement applications.
Being able to reuse the same equipment improves time to market and ensures comparability of test results troughout all steps. Mobile World Congress, CMP200, ATS800R, UWB testing Video: UWB R&D, FiRa certifictaion and production testing
Discover the technology and test aspects of Open RAN radio access networks (O-RAN) Watch this video and discover the technology and test aspects of Open RAN radio access networks (O-RAN). O-RAN is a combination of radio technologies, transport networks, clouds and network control, with security also playing an important role.
R&S®AVQA - loopback monitor R&S®AVQA loopback monitor provides a non-intrusive end to end test of the entire ATC voice communications system.
the details of carrier aggregation, its different types and its impact on how to test a device that supports carrier aggregation.
Learn how to perform audio measurements on a DAB car radio receiver for EN 303 345 compliance testing. The ETSI has specified a new mandatory test requirement, the radio equipment directive (RED), that applies to radio and television broadcast receivers sold into Europe.
R&S AVBrun Audio / Video / Broadcast Sequencer Software Tool - Specifications
This application note is a programming guide. It briefly summarizes basic tips and information about SCPI programming for remote-controlling Rohde & Schwarz signal generators.
26-Apr-2013 | AN-No. 1GP79
This application note shows how to determine the quality of a video streamed by an LTE mobile with R&S®CMW500 Radio Communication Tester and R&S®VTE Video Analyzer.
08-Sep-2014 | AN-No. 1MA253
This application note provides insight into some of these specifications and how test and measurement equipment can simplify the task of deriving requirements for RF sub-systems.
10-Apr-2013 | AN-No. 1MA221
DVB-T signal quality is determined by measuring the modulation error ratio (MER). However, a poor MER does not indicate its causes since different interference factors overlap at the transmitter when a signal is generated and transmitted. The R&S®ETL TV test receiver now has a unique new measurement capability that makes it possible to demonstrate to what extent the modulator's phase noise affects the MER.
13-Jul-2012
With IT and OT environments converging, security concerns relating to devices and applications deployed in networked test labs, especially in T&M environments, are growing. The demands on IT security here are manifold and include, for example, remote access to in-house infrastructures, equipment rented from external providers, and the continuous deployment of devices across different time zones.
18-Oct-2022
This white paper provides an overview of test solutions addressing current and future requirements for antenna verification.
11-Nov-2016 | AN-No. 1MA286
Camera, display and multimedia testing on automotive in-vehicle infotainment (IVI) systems
24-Apr-2018
How can the CQI (Chanel Quality Identifier) from UE and coresponding 3GPP specified mapping to Modulation and TBS be tested?