2117 Results
R&S SMA100B Generating narrow pulses with highest level accuracy and repeatability - Application Card
The R&S®FSWP phase noise analyzer and VCO tester features very high sensitivity thanks to extremely low noise internal sources and cross-correlation. It can measure phase noise on highly stable sources such as those found in radar applications in just seconds. Additional options such as pulsed signal measurements, residual phase noise characterization and integrated high‑end signal and spectrum analysis make the R&S®FSWP a unique test instrument. A multitouch display ensures straightforward and intuitive operation. The embedded SCPI recorder enables easy creation of executable scripts.
Oscilloscopes for debugging automotive Ethernet networks - Application Brochure
Rohde & Schwarz User Manual for the EUTRA/LTE application of the signal generator R&S®SMM100A, including Rel.9, Rel. 10, Rel. 11, Rel. 12, Rel. 13, Rel. 14, Rel. 15, IoT Rel. 14, Rel. 15 incl. enhancements,U-plane data generation; options R&S®SMM-K55/-K84/-K85/-K112/-K113/-K115/-K119/-K143/-K146/-K175.
12-Nov-2021
Rohde & Schwarz and OpenWorks prove new counter UAS technology at NATO TIE exerciseRohde & Schwarz and OpenWorks successfully prove a new high performance and autonomous 3D detection and tracking system for use in counter UAS missions, as part of NATO Technical Interoperability Exercise. NATO TIE autonomous C-UAS R&S ARDRONIS
MWC2019, PWC200, plane wave converter, FR1, massive MIMO, base station test, quiet zone, GSMA, Mobile World Congress Rohde & Schwarz demonstrates precise measurement of far-field properties in the antenna near field at GSMA Mobile World Congress 2019 in Barcelona.
Whether the task is measuring cables, filters, mixers or amplifiers, the R&S®ZNB family with its power levels up to 15 dBm, high dynamic range and outstanding stability is the right choice. vector network analyzer ZNB, Test and Measurement, network analyzers, network analysis, diplixer characterization ZNB Vector network analyzer features a wide dynamic range, low trace noise and high output power
R&S®MXO 5 - Evolved for more challenges EMI Testing Using MXO Oscilloscopes R&S®MXO 5 SERIES OSCILLOSCOPE R&S®MXO 5 SERIES OSCILLOSCOPE
07-Mar-2023
Airspace World 2023: Rohde & Schwarz launches drone based analyzer for efficient ATC air navigation signal inspectionAirspace World 2023: Rohde & Schwarz launches drone based analyzer for efficient ATC air navigation signal inspection
This video demonstrates how Rohde & Schwarz supports the Samsung Galaxy S20 5G testing using the QualiPoc Android premium handheld troubleshooter.
02-Mar-2022
Rohde & Schwarz provides highly accurate calibration technology for US Air ForceAFMETCAL, the Air Force Metrology and Calibration Authority, has been seeking to purchase microwave measurement receivers (MMR) for its precision measurement equipment laboratories (PMEL’s) and Air Force primary standards laboratory (AFPSL). According to these requirements Rohde & Schwarz has developed the R&S FSMR3000AF measuring receiver to calibrate signal generators and attenuators with one single instrument. Most important features provided are tuned RF level measurements, level measurements, analog modulation and spectrum analysis. This is the second order in between months, which AFMETCAL has placed with Rohde & Schwarz.
HSDPA - Challenges for UE Power Amplifier Design
11-Jul-2011 | AN-No. 1MA84
Experimental Study of 3G Signal Interaction in Nonlinear Downlink RAN Transmitters
03-Nov-2006 | AN-No. 1MA110
A versatile RF Fading Simulator can easily be built using an R&S®FSW, R&S®FSQ, R&S®FSG, R&S®FSV signal analyzer.
27-Feb-2015 | AN-No. 1MA145
Next generation technologies in radar and satellite communication with high data rates call for innovative testing solutions to develop and manufacture RF components like voltage controlled oscillators (VCO). The R&S®FSPN phase noise analyzer increases efficiency and reproducibility of VCO characterization and phase noise measurements from lab to production.Voltage controlled oscillators are oscillators whose output frequency is controlled by means of an external tuning voltage, and they are used in a wide variety of electronic and RF applications like function generators, phase-locked loops including frequency synthesizers used in communication equipment. Different VCO design approaches yield different parameters and performance, and therefore it is important to measure or characterize VCOs under different conditions. This application note provides a short technical introduction to voltage controlled oscillators and explains the most common and the most important measurements made during the VCO characterization process.
17-May-2023 | AN-No. 1SL386
Rohde & Schwarz together with the Fraunhofer Heinrich Hertz Institute demonstrated a test setup for radio channel propagation measurements at 39 GHz at the LTE Innovation Summit 2015 in Del Mar, California. The R&S®AFQ100A baseband generator and the R&S®SMW200A vector signal generator are used to generate a 39 GHz carrier frequency signal for the transmission.
Application video, videos MWC2017, CMW, IEEE 802.11ac, 11ac, Wi-Fi, WLAN, signaling test, GSMA, Mobile World Congress, MWC 2017 This video shows first IEEE 802.11ac signaling tester presented at GSMA MWC 2017
It also demonstrates phase noise emulation using the R&S SMW200A vector signal generator and how this function can be used to test correction algorithms to compensate for CPE in a receiver such as a mobile handset. 5G NR PTRS - how to emulate phase noise | Rohde & Schwarz Why does 5G NR require phase tracking reference signals?
The R&S®CMW500 RF communications tester provides an easy-to-configure, fully integrated IMS server infrastructure with reliable test conditions and now supports EVS-based voice over IMS calls in combination with various mobile technologies, such as LTE or voice over WLAN (VoWLAN) scenarios. enhanced voice services, EVS, codec support, SWB bandwidths, high-quality, VoLTE calls, CMW500 RF, communications
Including calibration support and verification test with traceability back to METAS Short summary of how the R&S®ZNA using the power of VNA Tools by METAS, the Swiss Federal Institute of Metrology, can help benefit engineers to make traceable S-parameter measurements. METAS is the Swiss Federal Institute of Metrology located in Bern, Switzerland.
As a test and measurement company, we’ve identified four disruptive technology components within the ten key enablers for 6G: Artificial intelligence / machine learning (AI/ML) Terahertz communications (THz) Joint communication and sensing (JCAS) Reconfigurable intelligent surfaces (RIS) Rohde & Schwarz is not just an observer; we’re actively shaping the future of 6G as part of various research projects
FSW, Test & Measurement, Signal and Spectrum Analyzer This Video shows Millimeter wave signal analysis using the R&S FSW signal and spectrum analyzer.
FSW, Test & Measurement, Signal and Spectrum Analyzer This Video shows Phase noise measurement with the R&S FSW signal and spectrum analyzer from Rohde & Schwarz
The integrated generator saves space on the test bench and provides both standard and arbitrary stimulus to the DUT. The generator can be operated as a pattern, function or modulation generator.
A free educational event on the latest test techniques across a wide range of automotive topics.
05-Jul-2021
Slovak Vipers to fly with Rohde & Schwarz radiocommunicationsRohde & Schwarz selected as the radiocommunications supplier for Slovak Air Force F-16 Block 70 aircraft.
04-Nov-2021
Rohde & Schwarz updates economy VNA portfolio with models up to 20 GHz and independant CW sources for low frequency modelsRohde & Schwarz launched four new R&S ZNL and R&S ZNLE vector network analyzers that can support up to 20 GHz of operation frequency. The economy VNAs now have the frequency range necessary to investigate even third harmonics for 5 GHz and 6 GHz band technologies, such as wireless LAN or mobile radio. The latest firmware release also includes a brand-new option that provides lower frequency R&S ZNL models with an internal CW signal generator.