Key facts
- 6 GHz maximum bandwidth
- 1 million waveforms per second
- 9.4 ENOB for ultimate signal integrity
- 2 Gpoints maximum memory
- Exclusive frequency zone trigger
Key facts
The R&S®RTO6 is the oscilloscope you can trust. Engineered to deliver reliable results, it acts as a sophisticated laboratory companion to solve measurement problems fast and keep you on schedule. The R&S®RTO6 oscilloscope series leverages the engineer’s expertise and builds your measurement confidence by achieving deep insights, whenever needed.
The R&S®RTO6 oscilloscope series provides superior signals to insight for your applications. The large 15.6" touchscreen and a new GUI, combined with high waveform update rate, excellent signal fidelity, digital trigger and deep responsive memory serve as a fully integrated test solution for frequency, protocol and logic analysis. The R&S®RTO6 oscilloscope series’ rich measurement toolset combined with a streamlined user interface helps you quickly solve circuit issues from simple to complex.
Quick links
... with an unparalleled update rate
Typical update rate (left) vs. 1 million waveforms/s (right)
... with excellent signal integrity
Measured frequency response of the R&S®RTO6
... with up to 16 bit resolution
Typical vertical resolution (left) vs. 16 bit resolution HD Mode (right)
... with advanced trigger capabilities
Trigger not possible (left) vs. straightforward triggering with digital trigger and HD Mode (right)
... with deep and responsive memory
Single-shot versus segmented acquisition
Vertical system | ||
Analog channels | 4 | |
Bandwidth (-3 dB) | R&S®RTO64 with R&S®RTO6-B90 option | 600 MHz |
(one bandwidth option mandatory) | R&S®RTO64 with R&S®RTO6-B91 option | 1 GHz |
R&S®RTO64 with R&S®RTO6-B92 option | 2 GHz | |
R&S®RTO64 with R&S®RTO6-B93 option | 3 GHz | |
R&S®RTO64 with R&S®RTO6-B94 option | 4 GHz | |
R&S®RTO64 with R&S®RTO6-B96 option | on 2 channels: 6 GHz on 4 channels: 4 GHz |
|
Rise time | R&S®RTO64 with R&S®RTO6-B90 option | 635 ps |
R&S®RTO64 with R&S®RTO6-B91 option | 375 ps | |
R&S®RTO64 with R&S®RTO6-B92 option | 210 ps | |
R&S®RTO64 with R&S®RTO6-B93 option | 145 ps | |
R&S®RTO64 with R&S®RTO6-B94 option | 110 ps | |
R&S®RTO64 with R&S®RTO6-B96 option | 77 ps | |
Vertical resolution | 16-bit system architecture | |
Effective number of bits / ENOB (meas.) | at 50 Ω, 50 mV/div, 10 MHz input signal with 90 % full-scale 50 MHz 100 MHz 200 MHz 300 MHz 500 MHz 1 GHz 2 GHz 4 GHz 6 GHz |
9.4 9.0 8.6 8.2 8.1 7.7 7.1 6 6 |
RMS noise floor | at 50 Ω, 1 mV/div, 10 MHz bandwidth filter | 10 µV (meas.) |
Input impedance | 50 Ω ±1.5 % 1 MΩ ±1 % at 15 pF (meas.) |
|
Input sensitivity | max. bandwidth in all ranges | 50 Ω: 1 mV/div to 1 V/div 1 MΩ: 1 mV/div to 10 V/div |
Acquisition system | ||
Realtime sampling rate | R&S®RTO6-B90, R&S®RTO6-B91, R&S®RTO6-B92, R&S®RTO6-B93 options | max 10 Gsample/s on each channel |
R&S®RTO6-B94, R&S®RTO6-B96 options | max. 10 Gsample/s on 4 channels max. 20 Gsample/s on 2 channels |
|
Acquisition memory | standard | 200 Mpoints on 4 channels 400 Mpoints on 2 channels 800 Mpoints on 1 channel |
R&S®RTO6-B104 option | 400 Mpoints on 4 channels 800 Mpoints on 2 channels 800 Mpoints on 1 channel |
|
R&S®RTO6-B110 option | 1 Gpoint on 4 channels 2 Gpoints on 2 channels (restriction: 1 Gpoint on 2 channels when channel 1 and channel 2 or channel 3 and channel 4 are turned on) 2 Gpoints on 1 channel |
|
Max. acquisition rate | 1 000 000 waveforms/s | |
Decimation modes | any combination of decimation mode and waveform arithmetics on up to 3 waveforms per channel | sample, peak detect, high resolution, root mean square |
Waveform arithmetics | off, envelope, average | |
Interpolation modes | linear, sin(x)/x, sample&hold | |
Deembedding (optional) | yes | |
Horizontal system | ||
Timebase range | 25 ps/div to 10,000 s/div | |
Timebase Accuracy | after delivery/calibration | ±10 ppb |
Trigger system | ||
Standard Trigger types | edge, glitch, width, runt, window, timeout, interval, slew rate, data2clock, pattern, state, serial pattern, TV/video, zone trigger | |
Optional Trigger types | serial bus trigger | |
Trigger sensitivity | definition of trigger hysteresis | automatic or manually adjustable from 0 div to 5 div |
Analysis and measurement | ||
Automatic measurements | 47 | |
Cursor measurements | 4 | |
Waveform mathematics | advanced (formula editor) | |
Mask testing | ||
Mask definition | advanced (user-configurable, hardware based) | |
Logic analyzer (MSO) functionality | ||
Digital input channels | 16 | |
MSO Memory depth | 200 Mpts per channel | |
MSO Bandwidth | 400 MHz | |
MSO sampling rate | 5 Gsample/s per channel | |
General data | ||
Dimensions | W x H x D | 450 mm × 315 mm × 204 mm (17.72 in × 12.40 in × 8.03 in) |
Weight | 10.7 kg (23.59 lb) | |
Interfaces | 1 Gbps LAN, type A: 2 x USB 3.1, 2 x USB 2.0, type B: 1 x USB 3.1, GPIB (optional), HDMI and DisplayPort for external monitor, external trigger, trigger output | |
Display | 15.6" capacitive touchscreen, resolution: 1920 x 1080 pixel (Full HD) | |
Operating system | Windows |
Order number 1801.6741.02
Mixed signal option: 16 digital channels, 5 GSa/s, 400 MHz bandwidth
Order number 1801.6735.02
Digital Extension Port for R&S®RTO6. Required for R&S®RT-ZVC02 and R&S®RT-ZVC04 Hardware. Included in R&S®RTO-B1.
Order number 1801.6758.02
Arbitrary waveform generator: 2-channel 500 MSample/s waveform generator and 8-channel pattern generator
Order number 1801.6764.02
Differential 16 GHz pulse source for R&S®RTO6 Oscilloscope
Order number 1801.6770.02
GPIB Interface
Order number 1801.6787.02
Replacement SSD, pre-installed with OS and oscilloscope firmware
Order number 1801.6793.02
Memory upgrade to 400 Mpoints on 4 channels, 800 Mpoints on 2 channels
Order number 1801.6806.04
Memory upgrade to 1 Gpoints on 4 channels, 2 Gpoints on 2 channels
Order number 1801.7277.02
Upgrade of the R&S®RTO6-B90 option to 1 GHz bandwidth
Order number 1801.7283.02
Upgrade of the R&S®RTO6-B90 option to 2 GHz bandwidth
Order number 1801.7290.02
Upgrade of the R&S®RTO6-B90 option to 3 GHz bandwidth
Order number 1801.7302.02
Upgrade of the R&S®RTO6-B90 option to 4 GHz bandwidth
Order number 1801.7319.02
Upgrade of the R&S®RTO6-B90 option to 6 GHz bandwidth
Order number 1801.7325.02
Upgrade of the R&S®RTO6-B91 option to 2 GHz bandwidth
Order number 1801.7331.02
Upgrade of the R&S®RTO6-B91 option to 3 GHz bandwidth
Order number 1801.7348.02
Upgrade of the R&S®RTO6-B91 option to 4 GHz bandwidth
Order number 1801.7354.02
Upgrade of the R&S®RTO6-B91 option to 6 GHz bandwidth
Order number 1801.7360.02
Upgrade of the R&S®RTO6-B92 option to 3 GHz bandwidth
Order number 1801.7377.02
Upgrade of the R&S®RTO6-B92 option to 4 GHz bandwidth
Order number 1801.7383.02
Upgrade of the R&S®RTO6-B92 option to 6 GHz bandwidth
Order number 1801.7390.02
Upgrade of the R&S®RTO6-B93 option to 4 GHz bandwidth
Order number 1801.7402.02
Upgrade of the R&S®RTO6-B93 option to 6 GHz bandwidth
Order number 1801.7419.02
Upgrade of the R&S®RTO6-B94 option to 6 GHz bandwidth
Order number 1801.6829.02
Jitter analysis
Order number 1801.6835.02
Clock data recovery
Order number 1801.6858.02
Power analysis
Order number 1801.6870.02
Spectrum analysis
Order number 1803.6778.02
Python interface for user defined math
Order number 1801.6887.02
Deembedding for compensation of channel effects
Order number 1801.8109.02
Embedding & Equalization
Embedding user-configurable components, predistortion at TX and equalization at RX via CTLE, FFE or DFE
Order number 1801.6893.02
TDR/TDT analysis
Order number 1801.6906.02
Jitter decomposition: Decomposition of jitter components, display of step response, histograms, synthetic eye diagrams, spectrum and BER-bathtub curve
Order number 1801.7677.02
Jitter and noise decomposition
Order number 1801.8050.02
PAM-N Analysis
Enabled for advanced jitter & noise, advanced eye and selected automated time/amplitude and eye measurements.
Order number 1801.8080.02
Advanced Eye Analysis
Including SW-CDR and comprehensive Mask test library.
Order number 1801.6864.02
Bus analysis: Bus measurements and analysis functions
Order number 1801.7019.02
Trigger & decode package "Low speed serial buses": I2C, SPI, RS-232, UART, I2S, LJ, RJ, TDM, Manchester, NRZ
Order number 1801.7025.02
Trigger & decode package "Automotive protocols": CAN incl. CAN-dbc file import, CAN-FD, LIN, FlexRay™ incl.
Fibex file import, SENT, CXPI
Order number 1801.7031.02
Trigger & decode package "Aerospace protocols": MIL-STD-1553, ARINC 429, SpaceWire
Order number 1801.7048.02
Ethernet protocols trigger and decode package: 10BASE-T, 100BASE-TX, MDIO
Order number 1801.7054.02
Trigger & decode MIPI RFFE
Order number 1801.7060.02
Trigger & decode package "Automotive Ethernet": IEEE 100BASE-T1, IEEE 1000BASE-T1
Order number 1801.7077.02
Trigger & decode package "USB protocols": USB 1.0/1.1, USB 2.0/HSIC, USB 3.1 Gen 1, USB Power Delivery (USB-PD), USB SSIC
Order number 1801.7083.02
Trigger & decode package "MIPI M-PHY, D-PHY": MIPI D-PHY, MIPI M-PHY, UniPro, decoding for DSI und CSI-2
Order number 1801.7090.02
"PCI Express" trigger and decode package : 8b10b (up to 6.25 Gbit/s), PCI Express revision 1.x/2.x
Order number 1801.7725.02
Trigger and decode bundle: Unlocks trigger and decode functionality for all protocols included in R&S®RTO6-K500/-K510/-K520/-K530/-K540/-K550/-K560/-K570/-K580/-K590
Order number 1801.6912.02
USB 2.0 compliance test
Order number 1801.6929.02
10M/100M/1G-BASE-T/EE Ethernet compliance test
Order number 1801.6935.02
Ethernet compliance test (2.5/5/10GBASE-T)
Order number 1801.6941.02
IEEE 100BASE-T1 compliance test
Order number 1803.6578.02
R&S®MIPI D-PHY compliance test software, V2.5
Order number 1801.6964.02
PCI Express 1.1/2.0 compliance test
Order number 1801.6970.02
IEEE 1000BASE-T1 compliance test
Order number 1801.6987.02
IEEE 10BASE-T1 compliance test
Order number 1801.7890.02
MGBASE-T1 compliance test
Order number 1801.6993.02
DDR3/DDR3L/LPDDR3 signal integrity debug and compliance test
Order number 1801.7160.02
eMMC compliance test
Order number 1801.7690.02
R&S®ScopeSuite automation
Order number 1801.6812.02
I/Q software interface: Converts modulated signals to I/Q data for further processing
Order number 1345.1011.06
Software
Brings the experience and power of Rohde & Schwarz signal analysis to PC and cloud
Order number 1310.0002K02
License dongle
Order number 1320.7516.06
Pulse measurements application
Order number 1345.1286.06
Multi-channel pulse measurements
Order number 1320.7539.06
Analog modulation analysis (AM/FM/φM)
Modulation analysis for AM/FM/φM modulated single carriers
Order number 1345.1970.06
Bluetooth® BR/EDR/LE measurements
Order number 1320.7574.06
GSM measurements
GSM/EDGE/ EDGE Evolution
Order number 1320.7868.06
Transient measurements
Transient analysis
Order number 1320.7880.06
Transient hop measurements
Transient analysis, requires R&S®VSE-K60
Order number 1320.7874.06
Transient chirp measurements
Transient analysis, requires R&S®VSE-K60
Order number 1345.2230.06
Transient phase noise measurements
Order number 1320.7522.06
Vector signal analysis
Order number 1345.1211.06
Multi-modulation analysis
R&S®VSE-K70 option required
Order number 1345.1228.06
BER PRBS measurements
R&S®VSE-K70 option required
Order number 1320.7580.06
3GPP FDD measurements
WCDMA signal analysis
Order number 1320.7597.06
IEEE 802.11a/b/g measurements
WLAN signal analysis
Order number 1320.7680.02
IEEE 802.11p measurements
WLAN signal analysis
Order number 1320.7600.06
IEEE 802.11n measurements
WLAN signal analysis
Order number 1320.7616.06
IEEE 802.11ac measurements
WLAN signal analysis
Order number 1345.1411.06
IEEE 802.11ax measurements
WLAN signal analysis
Order number 1320.7922.06
OFDM signal analysis
Order number 1320.7545.06
EUTRA/LTE FDD uplink and downlink measurement application
LTE signal analysis
Order number 1320.7551.06
EUTRA/LTE advanced and MIMO (downlink)
LTE signal analysis
Order number 1320.7568.06
EUTRA/LTE TDD uplink and downlink measurement application
LTE signal analysis
Order number 1320.7900.06
EUTRA/LTE
Narrowband IoT analysis
Order number 1309.9574.06
5G NR uplink and downlink measurement application
Order number 1345.1305.06
5G MIMO measurements
Order number 1345.1392.06
5G NR R16 measurements
Order number 1345.1463.06
HRP UWB measurements
Order number 1345.1663.02
5G NR R17 measurements
Order number 1350.7020.06
O-RAN measurements
Order number 1345.2001.06
OneWeb reverse link measurement application for R&S®VSE software. This application can be used to analyze OneWeb SC-FDMA signals.
Order number 1309.9580.06
User-defined Frequency Correction by SnP File
Order number 1320.7622.81
Software maintenance
Order number 1801.6641.02
Front Cover: Protects the front of the R&S®RTO6 oscilloscope
Order number 1801.6658.02
Soft Case: Stores the R&S®RTO6 oscilloscope and accessories
Order number 1801.6712.02
Transit case: Protects the R&S®RTO6 oscilloscope and accessories during transport
Order number 1801.6729.02
19" rackmount kit
Order number 1317.3420.02
Test fixture set for USB2.0 compliance
Test fixture for USB 1.0/1.1/2.0 compliance tests. Supported by R&S®RTO-K21 USB compliance test option.
Order number 1317.5522.02
Test fixture for 10/100/1000BASE-T, 10G-BaseT and BroadR-Reach Ethernet
Supported by R&S®RTO-K22, R&S®RTO-K23 and R&S®RTO-K24 Ethernet compliance test options.
Order number 5025.0670.02
Frequency converter
for 100BASE-T1/BroadR-Reach compliance test
Order number 1333.0880.02
10BASE-TE Energy Efficient Ethernet Test Fixture
Order number 1333.0896.02
Ethernet Probing Fixture
(directional, link partner, load)
Order number 1337.8579.02
Frequency converter board
for 1000BASE-T1 compliance test
Order number 1801.3688.02
Automotive T&D Fixture
Automotive Ethernet probing fixture including 2 SMA adapters RT-ZF7A
Order number 1801.4126.02
SMA Adapter
High precision adapter board from automotive connector to SMA
Order number 1802.9680.02
SMA adapter for PoDL
High precision adapter board from Industrial Ethernet connectors to SMA
Order number 1801.3694.02
Automotive Ethernet Compliance Fixture
Test fixture for 100BASE-T1 and 1000BASE-T1 compliance testing according to IEEE and OPEN TC8
Order number 1317.5639.02
1000BASE-T Jitter Test Cable
1000Base-T jitter test cable for the R&S®RTO-K22 Ethernet compliance test solution.
Order number 1800.0004.02
Power deskew fixture
Deskew fixture for voltage and current probes for power measurements; includes USB 2.0 cable for power supply
Order number 1409.7550.00
Passive probe, 500 MHz, 10:1
Order number 1409.7608.02
Transmission line probe, 8 GHz, passive
Order number 1418.7007.02
Active single-ended probe, 1 GHz, Rohde & Schwarz probe interface
Order number 1410.4080.02
Active single-ended probe, 1 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Order number 1410.3502.02
Active single-ended probe, 1.5 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Order number 1410.4309.02
Active single-ended probe, 3 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Order number 1418.7307.02
Active single-ended probe, 6 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Order number 1410.4715.02
Active differential probe, 1 GHz, Rohde & Schwarz probe interface
Order number 1410.4409.02
Active differential probe, 1.5 GHz, Rohde & Schwarz probe interface
Order number 1410.4609.02
Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface
Order number 1410.5205.02
Active differential probe, 4.5 GHz, Rohde & Schwarz probe interface
Order number 1800.4700.02
Modular probe amplifier module, 1.5 GHz
Order number 1419.3005.02
Modular probe amplifier module, 3 GHz
Order number 1419.3105.02
Modular probe amplifier module, 6 GHz
Order number 1419.3205.02
Modular probe amplifier module, 9 GHz
Order number 1800.5006.02
Power rail probe, 2 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
2.0 GHz, 1:1, 50 kΩ, R&S probe interface
Order number 1800.5406.02
Power rail probe, 4 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Order number 1326.0259.02
Multi-channel power probe
1 MHz, 5 MSa/s, 18 Bit, 2 current inputs, 2 voltage inputs
Order number 1326.0259.04
Multi-channel power probe
1 MHz, 5 MSa/s, 18 Bit, 4 current inputs, 4 voltage inputs
Order number 1333.0873.02
250 MHz passive high voltage probe
Order number 1409.7720.02
400 MHz passive high voltage probe
Order number 1409.7737.02
400 MHz passive high voltage probe
Order number 1800.2107.02
100 MHz High voltage differential probe
Order number 1800.2207.02
200 MHz High voltage differential probe
Order number 1800.2007.02
100 MHz High voltage differential probe
Order number 1333.0850.02
AC/DC 20 kHz current probe
Order number 1333.0844.02
100 kHz current probe
Order number 1409.7750K02
10 MHZ current probe
Order number 1409.8210.02
10 MHZ Current probe
Order number 1409.8227.02
50 MHZ Current probe
Order number 1409.7766K02
100 MHZ current probe
Order number 1409.8233.02
100 MHZ current probe
Order number 1409.7772K02
120 MHz current probe
Order number 1801.4932.02
120 MHz current probe
Order number 1147.2736.02
E and H near-field probe set
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes
1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).
2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.
3. Participation is free of charge and not dependent on the purchase of goods or services.
4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.
5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:
Prize: 1x R&S®RTB2000 Digital Oscilloscope
6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.
7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.
8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.
9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.
10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.
11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.
12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.
13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.