Rohde & Schwarz webinars

Rohde & Schwarz webinars

Date
Date

March 19, 2025

Register now
Country
Location

Online

Info
Info

Language: EN
Trainers:
Alexander Küllmer, Application Engineer Oscilloscopes, R&S
Andreas Nadler, Field Application Engineer, Würth Elektronik

Webinar Validating Efficiency and EMC on WBG devices

Electronic Design

Webinar Validating Efficiency and EMC on WBG devices

Are you developing switched mode power supplies? Do you want to switch from traditional silicon to wideband gap devices made of SiC or GaN and wonder how this will improve your efficiency and how EMC is affected? Then join us in this webinar to see which losses are affected by the used material and what to keep in mind when performing measurements on such devices.

This Webinar will handle following topics:

  • Why use GaN instead of Silicon? Here the material characteristics will be discussed and a loss analysis of a buck converter will be performed.
  • What to know when designing your SMPS with a GaN device and how to provide measurements points and select the right passives.
  • How to select the right oscilloscope and probing solutions for your application.
  • How and why to isolate your oscilloscope from your DUT to measure signals like high-side gate or a current. Is really always an optical isolated probe needed?

Don’t miss this chance to learn more on how to best handle the trending materials like SiC and GaN in your daily work.