Key facts
R&S®ZNH is a full two-port handheld vector network analyzer that offers one-port cable and antenna measurement and full two-port S-parameter measurements. The touch based interface is simple to operate and a configuration overview menu makes measurement preparation more efficient. The R&S®ZNH may have a small form factor but it is complete in every detail and delivers high performance and all the key functionalities.
Sophisticated RF architecture provides access to latest calibration types
The four-receiver architecture consists of dedicated reference receivers and test receivers at both port 1 and port 2, allowing the R&S®ZNH to support more advanced calibration types such as unknown through, open, short and match (UOSM) calibration. This calibration is useful for DUTs with different input or output connector types at the test ports.
Four-receiver architecture
Minimal switching between the two ports and sophisticated calibration such as UOSM
Outstanding RF performance in a small form factor
The portability and small footprint of the R&S®ZNH make it ideal for field measurements.
The R&S®ZNH also delivers high performance with the following features:
Receiver step attenuator
Increases the linearity of the port input power range, which protects the analyzer against overloading.
Multi-touchscreen, remote control and measurement wizard for a top user experience
The touchscreen has the standard pinch-to-zoom function available on smartphones. The R&S®ZNH supports typical phone control gestures, helping users feel at home. Even if operators cannot access the instrument directly, free PC, Android and iOS remote control apps are available for seamless operation. Furthermore, the measurement wizard helps simplify measurements with automated test sequences, speeding up the test process and reducing the potential for human error.
Multi-touch function
Capacitive touchscreen; intuitive operation and no display calibration required.
Simple and fast setup with configuration overview menu
The R&S®ZNH has both keys and a rotary knob as well as touchscreen controls. The keys are large and well spaced out, allowing easy operation when wearing gloves.
The capacitive touchscreen offers a new kind of user experience:
Flexible calibration
User defined calibration sequences provide a flexible approach.
Comprehensive standard features and simple option ordering
The R&S®ZNH base unit includes:
Quick setup of S-parameter display in desired format.
Four S-parameter measurements provided as standard.
Power sensor support
DC bias variable voltage source
Pulse measurements with power sensor
Vector voltmeter
Mixed mode S-parameters
Wave ratios wave quantities
Time domain analysis
Power sensor measurement vs frequency
Calibration Kit, 0 Hz to 3 GHz, N, 50 Ω
Calibration Kit, 0 Hz to 3 GHz, N, 75 Ω
Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement
DC to 8 GHz for R&S®FSH
Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement
DC to 3.6 GHz forR&S®FSH4/R&S®FSH8
Calibration unit, 1 port, N (f), 2 MHz to 4 GHz
Calibration unit, 1 port, N (f), 1 MHz to 6 GHz
Calibration kit, 50 Ohm, N (male), 0 Hz to 18 GHz
Calibration kit, 50 Ohm, N (female), 0 Hz to 18 GHz
Calibration kit, 50 Ohm, 3.5mm (male), 0 Hz to 26.5 GHz
Calibration kit, 50 Ohm, 3.5mm (male), 0 Hz to 26.5 GHz
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 635 mm (25 in)
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 965 mm (38 in)
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 635 mm (25 in)
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 965 mm (38 in)
Test port cable, 0 Hz to 18 GHz, N (m) - N (m), length 610 mm (24 in)
Test port cable, 0 Hz to 18 GHz, N (m) - N (m), length 914 mm (36 in)
Test port cable, 0 Hz to 18 GHz, N (m) - 3.5 mm (m), length 610 mm (24 in)
Test port cable, 0 Hz to 18 GHz, N (m) - 3.5 mm (m), length 914 mm (36 in)
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 610 mm (24 in)
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 914 mm (36 in)
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 1524 mm (60 in)
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 610 mm (24 in)
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) - 2.92 mm (m), length 914 mm (36 in)
RF cable (length: 1 m), DC to 8 GHz, armored, N male/N female connectors
for R&S®FSH-K41 option
RF cable (length: 3 m), DC to 8 GHz, armored, N male/N female connectors
for R&S®FSH-K41 option
High-Power Attenuator, 50W
0 Hz to 6 GHz, 20 dB
High-Power Attenuator, 100 W
0 Hz to 2 GHz
High-Power Attenuator, 100 W
0 Hz to 2 GHz
GPS Receiver for R&S®Spectrum Rider
Matching pad, 75 Ω, L section
bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section
Matching pad, 75 Ω, series resistor 25 Ω
0 Hz to 2.7 GHz
Matching pad 50/75 Ω, L section, N to BNC
bidirectional, 0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W
N - BNC Adapter (N male - BNC female)
N - Adapter (N male - N male)
N- Adapter (N male - SMA female)
N - Adapter (N male - 7/16 female)
N - Adapter (N male - 7/16 male)
N - Adapter (N male - FME female)
N - BNC Adapter (BNC male - banana female)
External battery charger
Charges batteries outside of the instrument
Battery pack
Lithium-ion battery with discharge indicator, 6.4 Ah
Spare power supply, incl. mains plug for EU, UK, US, AUS, CH
Power supply for vehicles
Powers the instrument and the R&S®HA-Z303 external battery charger
Carrying holster
Rainproof carrying holster
Carrying bag
Hard Case for R&S®Spectrum Rider
Hard shell protective carrying case
Dimensions: 455 mm x 368 mm x 166 mm. Weight: 2.5 kg.
Spare USB cable
Spare LAN cable
Directional power sensor
25 MHz to 1 GHz
Directional power sensor
200 MHz to 4 GHz
Two-Path diode power sensors
Universal power sensor, 10 MHz to 8 GHz, 100 mW, two-path
Two-Path diode power sensors
Universal power sensor, 10 MHz to 18 GHz, 100 mW, two-path
Three-path diode power sensor
For USB operation; Measurement range: 100 pW to 200mW; Frequency range: 10 MHz to 8 GHz; N (m) connector
Three-path diode power sensor
For USB operation
Three-path diode power sensor
For USB operation
Three-path diode power sensor
For USB operation
Three-path diode power sensor
For USB operation
Thermal power sensor
300 nW to 100 mW, DC to 18 GHz
Thermal power sensor
300 nW to 100 mW, DC to 33 GHz
Thermal power sensor
300 nW to 100 mW, DC to 40 GHz
Thermal power sensor
Thermal power sensor
Thermal Power Sensor
Thermal power sensor
Average Power Sensor
100 pW to 200 mW, 8 kHz to 6 GHz
Average Power Sensor
100 pW to 200 mW, 8 kHz to 18 GHz
Wideband Power Sensor
50 MHz to 18 GHz, 100 mW
Wideband Power Sensor
Time domain analysis and automatic pulse analysis for radar applications and universal use
Wideband Power Sensor
Time domain analysis and automatic pulse analysis for radar applications and universal use
Wideband Power Sensor
Time domain analysis and automatic pulse analysis for radar applications and universal use
USB adapter cable
for R&S®FSH-Z14/R&S®FSH-Z44 power sensors
USB adapter cable (passive), length: 2 m
USB-A interface cable, length: 1.5 m
OEM USB Optical Power Meter (Germanium)
OEM USB Optical Power Meter (filtered InGaAs)
SC Adapter for Optical Power Meter
LC Adapter for Optical Power Meter
2.5 mm Universal Adapter for Optical Power Meter
1.25 mm Universal Adapter for Optical Power Meter
Patch Cord SC-LC SM, SX, length: 1 m
Patch Cord SC-SC SM, SX, length: 1 m
