Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1118 Results
Antennas have become an integral part of consumer electronics, even in small portable devices that rely on an energy source with limited capacity. Consequently, antennas need to be physically small and power efficient.
05-Mar-2020
Remote control of test and measurement equipment with a serial interface is limited to PC’s located in close proximity determined by the length of a typical serial cable connection (several feet). Usage of terminal server allows connecting through LAN or WAN networks thus controlling the instrument from further away even around the globe. The terminal server interfaces between TCP/IP protocol and the RS232 line. This application describes set-up of a popular terminal server from Black Box® Corporation to remotely and conveniently control the instruments EFA with EFA Scan software and DVRM or DVMD with Realtime Monitor / Stream Explorer software through a LAN or WAN network.
07-Jul-2003 | AN-No. 7BM41
5G networks will need to offer more capacity and flexibility while lowering the operational expenses of the system. Two new technologies can simultaneously address both the increase in capacity and the increase in energy efficiency: Virtualization & Massive MIMO. This white paper provides an overview of test solutions addressing current and future requirements for antenna verification including both conducted and over-the-air (OTA) test methods, which result from applying Massive MIMO antenna technology.This white papers complements the white paper (1MA276) from Rohde & Schwarz, which introduces fundamental theory behind beamforming antennas and provides calculation methods for radiation patterns, a number of simulation results as well as some real world measurement results for small linear arrays.
11-Nov-2016 | AN-No. 1MA286
The R&S®ZNB vector network analyzer together with the R&S®HF907 double-ridged waveguide horn antenna provides fast and accurate TD SVSWR measurements in line with ANSI C63.25.
06-Aug-2018
Analog-to-digital converters (ADCs) have taken giant steps in speed and accuracy over the past years: Such devices allow high-speed video processing and even software defined radio (SDR) applications, where digitization is being performed at ever-higher intermediate frequencies (IF). This has clearly raised the bar for ADC test equipment, especially regarding the noise performance of the analog input signal and sample clock sources used in the test setup. The R&S®SMA100B offers outputs for the analog input signal of the ADC as well as the clock input signal in one single instrument - both with outstanding signal purity.
11-Jan-2021 | AN-No. 1GP66
Measuring cable characteristics is important when it comes to installing and servicing cable TV systems. Cable pinches or poor connections considerably influence the characteristics of cable TV systems. This document shows how the measurement is carried out in a 75 Ohm system. The basics of distance-to-fault measurements, the test setup, calibration and measurement are discussed.
21-Sep-2006 | AN-No. 7BM60
This application note describes how to verify and validate a LTE (FDD) RF chipset using R&S® SMU200A vector signal generator, R&S® FSQ signal analyzer and R&S® EX-IQ Box. The related signal generation as well as signal analysis is described
19-Dec-2008 | AN-No. 1MA138
Despite the advent of advanced digital transmission methods, analog broadcasting remains highly important. Until now, measurements on FM transmitters in connection with acceptance testing, commissioning and maintenance required using a variety of T&M instruments.The R&S ETL TV analyzer combines these instruments' capabilities in a single unit and can completely replace them. Now, for the first time, acceptance test measurements can be conducted on FM transmitters quickly and easily using just one compact test instrument. The R&S ETL provides the functionalities of a power meter, spectrum analyzer, audio generator, FM measurement demodulator, stereo decoder, audio analyzer and more in just one box.
10-Sep-2013 | AN-No. 7BM105
The battery life measurement solution for the R&S®CMW500 platform identifies which ECUs and which applications running on telematics units impact battery life.
23-Aug-2017
Voice over IP for air traffic control
15-Oct-2012
Gated mode measurements in private 5G networks
11-Apr-2024
The effective number of bits (ENOB) is a way of quantifying the quality of an analog to digital conversion. A higher ENOB means that voltage levels recorded in an analog to digital conversion are more accurate. In an oscilloscope the ENOB is not just determined by the quality of the analog to digital converter but by the instrument as a whole. This application note explains how to measure the oscilloscope ENOB and shows results for the R&S®RTO for different settings.
13-May-2011 | AN-No. 1ER03
The Application Note summarises all measurements for WLAN test, according to the IEEE Standards 802.11a, b and g. For each measurement, an instrument list, test setups, test method, comments, typical results and implementation hints are included. The enclosed free of charge software provides all IEEE 488 bus sequences ready to run or copy into your own test environment.
28-Jul-2004 | AN-No. 1MA69
Multiple Input Multiple Output (MIMO) is an integral part of LTE. Vector signal generators and signal & spectrum analyzers from Rohde & Schwarz support LTE measurements with up to 4 antennas. This Application Note covers 2x2 MIMO in the LTE downlink. Remote control programming is demonstrated by examples for a free-of-charge program.
09-Oct-2014 | AN-No. 1MA143
Many measurements in audio applications have to be monitored for compliance with specified limit values. Therefore, sometimes a whole series of measurements have to be compared with a fixed limit value, in other case it might be necessary to define different tolerances for example for different frequency ranges. Both can be done using Audio Analyzer UPD or UPL. This application note covers the different possibilities of limit checking, it demonstrates how to edit limit files and presents a program to easily generate files for checking the limits of frequency response measurements. Furthermore the display modes for different kinds of references are explained.
04-Jun-1998 | AN-No. 1GA33
This is a very special application note for all those who have seen the ZVatch (ZVR watch) and not really believed the nice red curve on its face. This curve can actually be generated with a Vector Network Analyzer ZVR.
25-Jan-2002 | AN-No. 1EZ28
This application note provides information about the ACLR measurement with noise correction. The basic requirements and the limiting factors of a spectrum analyzer are explained. Dynamic range improvements by means of a noise correction is presented. Measurement examples show the practical realisation ACLR measurements.
16-May-2002 | AN-No. 1EF49
NGE100B, HMC804x, HMP2000, HMP4000, HM8143, NGL200, NGM200, M3SR IN4000A, Power supplies, DC Power supplies, The arbitrary waveform feature o Rohde & Schwarz solutions allow you to simulate device behaviors and replaces basic standalone arbitrary waveform generators. Emulate real-world scenarios with Rohde & Schwarz power supplies NGE100B, HMC804x, HMP2000, HMP4000, HM8143, NGL200, NGM200, M3SR IN4000A
04-Nov-2019
The R&S®FSW signal and spectrum analyzer is a high-performance instrument capable of measuring many key system and component parameters. Using the bit error rate (BER) functionality of the R&S®FSW-K70P option, the raw data error performance of a component or system can be accurately determined.
26-Sep-2018
This application note is based on collaborative work between Cadence and Rohde & Schwarz.The focus is on understanding as early as possible in the design process performance enhancements through linearization of non-linear devices, in our case the RF power amplifier (PA). In other words, what performance benefits can be reached with linearization techniques such as digital predistortion (DPD). Typically, this is investigated when the device is available and physical RF measurements are conducted. In this application note, it is looked at earlier in the design process while using electronic design automation (EDA) such as Cadence® AWR® Visual System Simulator™ (VSS) software. The goal is to allow an RF designer to evaluate the linearizability of his design without in-depth knowledge of DPD algorithms. In the end, the designer can get closer to the optimal efficiency with earlier access to DPD, while at the same time improving time-to-market.The application note brings code examples and an exemplary setup for VSS software to provide an easy start to replicate and use the described procedure.
20-Apr-2022 | AN-No. 1SL383
The R&S®Pulse Sequencer software offers an interface to import lists of pulse descriptor words (PDW). Users can define their specific PDW format in the software before importing the PDW list. The R&S®Pulse Sequencer software automatically uploads the interpreted PDW lists on the R&S®SMW200A to generate the most agile radar signals.
20-Feb-2018
Best practices for national regulatory authorities
Key points:Importance of field measurements: Traditional network planning tools and models only offer an estimated view of mobile coverage. Field measurements are conducted under real geographical and load conditions, and therefore provide a more accurate picture and can discover interferences more effectively. Coverage investigations: When deploying a mobile network, operators must adhere to regulatory standards and licensing conditions. As a result, regulatory authorities carry out field measurements on a regular or ad hoc basis to validate compliance or investigate customer complaints. This process identifies coverage gaps and areas of poor network quality, enabling regulatory authorities to take actions to enhance service quality for consumers and guide network expansion.Foster competition: If the field measurements of the coverage and performance are performed on a scale representative of a given country, the transparency of these results can promote healthy competition between operators and better service for consumers, which is essential for economic growth and social development.Measurement Techniques: The harmonized methodology for measuring and evaluating data throughput and QoE based on popular services is described in ETSI TR 103 559.
15-Apr-2024 | AN-No. 8NT14
Today virtually every electronic device has a standby mode. Power consumption is regulated in most countries by increasingly stringent limits. This makes standardized power measurement essential.
12-Sep-2018
This application note describes how to use the generic interface in R&S®AdVISE for remote operation.
19-Jun-2020 | AN-No. 1S002
Using a Vector Network Analyzer from the ZVR family, not only magnitude and phase can be measured, but also group delay and even phase delay. Whereas phase delay measurements produce the highest accuracy for the electrical length of non-dispersive devices under test, such as coaxial cables, group delay measurements also give a detailed insight into the frequency dependent delay characteristics of dispersive devices, such as filters. In addition to the traditional step aperture technique, Vector Network Analyzers from the ZVR family offer a frequency aperture technique, which allows a well defined and constant aperture for group delay measurements also for a nonlinear frequency sweep.
28-Jul-1998 | AN-No. 1EZ35
This document describes the adaptive frequency hopping mechanism for improved signaling performance in Bluetooth Basic Rate and Enhanced Data Rate devices.The R&S CMW provides this feature for remote operation in TX, Loopback and Connection test mode. Thereby the R&S CMW acts as a master, while the Equipment under Test (EUT) represents the slave(s) of the piconet.
14-Dec-2016 | AN-No. 1C108
Embedding and De-Embedding of virtual transformation networks for measuring scattering parameters with a ZVR or ZVC vector network analyzer.
25-Sep-1998 | AN-No. 1EZ45
The R&S®CMX500 radio communication tester is ideal for analyzing VoNR and VoLTE voice quality and performance in mobile devices.
21-Feb-2023
R&S®CMWcards, an intuitive and user-friendly software application, makes mobility verification easier than ever.
09-Apr-2019