Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
101 Results
This document presents a simple procedure for network analysis that is more cost-effective than the use of scalar network analyzers. It allows the accurate measurement of the transmission characteristics of filters, amplifiers and frequency converters over a large frequency and dynamic range. In order to reach very high measurement speeds, Rohde & Schwarz signal generators are operated in 'List Mode', and Rohde & Schwarz power meters are operated in 'Buffered Mode.' The required programming for the signal generator and the power meter is illustrated by excerpts from a Visual Basic program which is available, free of charge, upon request.
14-Jul-2006 | AN-No. 1MA101
Volker Fischer 1EF86 LTE, MIMO, LTE-MIMO, RTO1044, SMU200A, K102, K103, K102PC, K103PC This application note describes the possibilities to measure LTE MIMO with the LTE-Software R&S®FS-K102/K103PC in combination with an R&S®RTO1044 oscilloscope.
24-Apr-2013 | AN-No. 1EF86
When measuring the performance of 802.11 wireless LAN compatible receivers, Packet Error Rate (PER) tests are the method of choice today. This application note describes a simple way to conduct PER tests using signal generators on any 802.11 device, independent of their physical layer design (11b, 11a or 11g). The application software works with standard Windows™ drivers on any card independent of manufacturer. No additional hardware specific software is needed. Easy setup of the source signal is included with direct upload to an SMIQ or AMIQ.
09-Jan-2012 | AN-No. 1GP56
Nearly all tests in accordance with the Bluetooth low energy test specification V4.0 [1] can be performed using the R&S®CBT alone. Some tests additionally call for signal generators to provide interference signals. This application note describes the tests performed with additional equipment and presents straightforward solutions based on the R&S®CBTgo software.
18-Jul-2013 | AN-No. 1MA200
With AMPTUNE amplifier nonlinearity can be measured with signals that are typical for the signals encountered by the amplifier in day-to-day use. The measurement can be checked by pre-distorting the control signal. Also, the results can be automatically stored for further processing with external programs.
26-Oct-2005 | AN-No. 1MA27
The new WiMAX radio technology - worldwide interoperability for microwave access - is based on wireless transmission methods defined by the IEEE 802.16 standard. WiMAX has been developed to replace broadband cable networks such as DSL and to enable mobile broadband wireless access. Rohde & Schwarz offers a complete test solution for WiMAX applications by combining its Signal Generator R&S SMU200A and Signal Analyzer R&S FSQ plus the appropriate options.RuS_WiMAX_OFDM is a 10 minutes video on WiMAX OFDM measurements.Please see also 1MA96 for General information about the WiMAX standard and 1MA97 for Generating and analyzing 802.16-2004 and 802.16e-2005 signals.
11-Jul-2006 | AN-No. 1EF57
This application note describes how to measure the coherence (phase-, timing and gain-differences) between two RFSignals using Rohde&Schwarz spectrum analyzers, a Rohde&Schwarz signal generator and the R&S FS-Z10 Coherence Unit.
28-Sep-2010 | AN-No. 1EF70
Multiple antenna systems, known as MIMO systems, form an essential part of today’s wireless communications standards. This multi-antenna technology efficiently boosts the data throughput without requiring additional bandwidth, and has thus become a key technology. Rohde & Schwarz offers high-performance MIMO test solutions which provide static conditions without fading as well as simulation of complex fading scenarios.This application note explains how to set up 4x4 and 8x8 MIMO systems using the R&S®SMBV100A signal generator for measurements under static conditions without fading.For simulation of complex fading scenarios please refer to application note 1GP97.
10-Mar-2010 | AN-No. 1GP50
This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Android™ tablet as if working on it locally. Step-by-step procedures are provided for setting up and configuring the T&M instrument and the tablet. On the tablet, a special App implements the Windows® 'Remote Desktop' functionality. T&M instrument and tablet are connected via WLAN (also called Wi-Fi network).
22-Aug-2013 | AN-No. 1MA236
3GPP Release 9 Technical Specification (TS) 37.141 covers multistandard radio base station conformance testing. Multistandard radio includes four standards of mobile communications: GSM, WCDMA, TD-SCDMA, and LTE. This application note introduces the concept of multistandard radio base stations as well as solutions for transmitter and receiver tests based on Rohde & Schwarz signal generators and Rohde & Schwarz signal and spectrum analyzers.
06-Jul-2012 | AN-No. 1MA198
Most of the tests specified in standard TS 34.121 [1] for 3GPP Rel-6 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-6 measurements on transmitter characteristics and performance tests according to TS 34.121 V8.7.0 clauses 5 and 10 with stand-alone R&S®CMU200. Test cases that require additional instruments, e.g. fading generator (R&S®SMU200A or R&S®AMU200A) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&S®CMU200 firmware V5.03 for UE supporting operating band I and power class 3 in RMC 12.2 kbps + HSPA is attached to this application note.
07-Oct-2009 | AN-No. 1CM73
GPRS (General Packet Radio Service) and EDGE (Enhanced Data Rates for GSM Evolution) provide data capabilities in widely deployed 2G networks reaching peak and average data rates of 384kpbs and 200kbps, respectively. Within 3GPP Release 7, further improvements to GPRS/EDGE have been specified in the context of EDGE evolution. This application note introduces key features of EDGE evolution and outlines the changes to the radio interface.
02-Apr-2008 | AN-No. 1MA129
Femtocells or Home base stations are an important development for cellular networks. This application note describes the tests commonly used during the production of Femtocells, focusing on WCDMA, HSPA, and HSPA+ technology. Tests, test plans and hardware setups for Femtocells with and without receiver diversity are detailed. Find hints about the instrument settings and have a look at typical measurement results. An introduction to simulating GPS / A-GPS signals for testing the GPS receiver of a Femtocell completes the paper.
02-Feb-2012 | AN-No. 1MA139
Most of the tests specified in standard TS 34.121 for 3GPP Rel-99 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-99 measurements on transmitter/receiver characteristics, and performance tests according to TS 34.121 V8.4.0 clauses 5, 6 and 7 with standalone R&S®CMU200. Test cases that require additional instuments e.g. fading simulator (R&S®SMU200A or R&S®AMU200A) or spectrum analyzer (R&S®FSQ) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&SCMU200 firmware V5.02 for UE supporting band I with power class 3 in RMC 12.2 kbps downlink/uplink is attached to this application note.
15-Apr-2009 | AN-No. 1CM71
Nearly all tests in accordance with the test specification* can be performed with the R&S® CMU200/CBT alone. Some tests additionally call for signal generators to provide interference signals and also require spectrum analyzers. This application note describes the tests performed with additional equipment and presents straightforward solutions based on the CBTgo software.
06-Mar-2013 | AN-No. 1MA106
Most of the tests specified in standard TS 34.121 [1] for 3GPP Rel-5 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-5 measurements on transmitter characteristics, receiver characteristics and performance tests according to TS 34.121 V8.7.0 clauses 5, 6 and 9 with standalone R&S®CMU200. Test cases that require additional instruments, e.g. fading generator (R&S®SMU200A or R&S®AMU200A) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&S®CMU200 firmware V5.03 for UE supporting operating band I with power class 3 in RMC 12.2 kbps + HSDPA is attached to this application note.
13-Oct-2009 | AN-No. 1CM72
This application note provides a guide through the measurements for IEEE 802.11ac WLAN transmitter signals using the general purpose OFDM analysis software R&S FS-K96. Step-by-step instructions for performing the measurements are provided and the different result types available with the FSK96 Software are discussed.
22-Sep-2011 | AN-No. 1EF82
The scope of the subject “radar” has expanded in the recent years in terms of its technical evolution and spreading of applications. This application note along with its corresponding white paper 1MA207 show how to use the R&S radar product portfolio to tackle test and measurement tasks in modern radar technology. Target groups are students who want to become familiar with radar issues as well as radar professionals who want to solve certain test and measurement tasks.
10-Aug-2012 | AN-No. 1MA127
Spectrum that was previously reserved for TV broadcasting is being freed up in many countries for use under the new Long Term Evolution (LTE) mobile radio standard (keyword: 'digital dividend'). As a result, numerous coexistence scenarios are possible. So network operators and manufacturers from both the mobile radio and the broadcast sector have a vital interest in avoiding any interference and performing in-depth testing of their products. Rohde & Schwarz offers a wideranging product portfolio for such applications. This Application Note presents Test & Measurement equipment for the broadcast and mobile radio sector and discusses some possible test setups.
08-Dec-2011 | AN-No. 1MA176
Multiple antenna systems, known as MIMO systems, form an essential part of today’s wireless communications standards. The multi-antenna technology efficiently boosts the data throughput without requiring additional bandwidth or transmit power and has thus become a key technology. Rohde & Schwarz offers compact and versatile MIMO test solutions with realtime fading including simulation of channel correlations.This application note explains how to set up Rohde & Schwarz signal generators for 2x2, 4x2 and 2x4 MIMO tests with a focus on signal routing, synchronization of the generators, and leveling. Please note that there is a successor application note available: 1GP97. It explains how to use the R&S®SMW200A vector signal generator for testing higher order MIMO systems such as 3x3 and 4x4.
14-Oct-2009 | AN-No. 1GP51
This application note discusses WLAN standard IEEE 802.11n. It first describes the most important amendments to previous releases and the ambitious new measurement tasks. Then, it describes how to deal with these tasks using Rohde & Schwarz instruments. The main focus here is on transmission over several TX and RX antennas (MIMO). Building multistandard signals using Rohde & Schwarz generators is also described. Screenshots from the analyzer taken on 802.11n signals complete the document.
26-Apr-2013 | AN-No. 1MA179
Even with the introduction of HSDPA and HSUPA, evolution of UMTS has not reached its end. To ensure the competitiveness of UMTS for the next 10 years and beyond, UMTS Long Term Evolution (LTE) is being specified in 3GPP release 8. LTE, which is also known as Evolved UTRA and Evolved UTRAN, provides new physical layer concepts and protocol architecture for UMTS. This application note introduces LTE technology and testing aspects.
14-Sep-2009 | AN-No. 1MA111
The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.
20-Dec-2012 | AN-No. 1MA035
The R&S EX-IQ-Box serves as a digital baseband interface between a device under test (DUT) and Rohde & Schwarz generators, analyzers and radio communication testers. The DigIConf software supplied with the device controls up to four R&S EX-IQ-Boxes in a test setup and can thus output IQ data for feeding into a DUT while simultaneously receiving IQ output from a DUT.To work together smoothly, the DUT, the R&S EX-IQ-Box and the R&S test instruments have to be configured properly. The purpose of Application Note 1MA168 is to introduce the right 'initial steps' required to get started successfully.
23-May-2012 | AN-No. 1MA168
This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.
15-Sep-2012 | AN-No. 1MA206
Receiver diversity improves reception quality by using multiple antennas with a preferably low correlation factor between each other. This results in a more robust handling of multipath signals, since a deep fade will then not affect all received signals at the same time. However, the compact dimensions of handheld devices can introduce unwanted correlation due to their dense antenna spacing. In this case, the popular diversity test setup consisting of several independent transmitters will no longer serve the needs of a realistic simulation, since correlation effects have to be taken into account here. A clever solution is to operate the R&S®SFU in split-fading mode in combination with a second transmitter. This can be another R&S®SFU, the R&S®SFE, the R&S®SFE100 or the R&S®SMU200A. In this way, two diversity signals of adjustable correlation for any common broadcast standard are coded in realtime, while their individual multipath profile is precisely specified by the extensive features of the R&S®SFU fader module.
19-Oct-2012 | AN-No. 7BM76
This appication note introduces a program suitable for generating and analyzing WiMAX IEEE 802.16 signals for power amplifier testing. The program allows the user to change the generator settings, to select specific pre-defined test parameters and to analyze the test results. The application note describes the test parameters and the features and capabilities of the program.
03-Aug-2007 | AN-No. RAC-0611-0025
Sequencing of waveforms is a technique used to play back multiple test signals fast and flexibly using an arbitrary waveform generator (ARB). Multiple ARB waveforms can be combined to generate all kinds of test signals sequences. Switching from one waveform to the subsequent waveform in the sequence is instantaneous, which enables high-speed operation for production testing. This application note explains how to generate such signal sequences using vector signal generators from Rohde & Schwarz. The examples provided show the required instrument settings and possible fields of application for waveform sequencing.
29-Feb-2012 | AN-No. 1GP53
R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications. R&S®VISA also includes a trace tool that simultaneously monitors communications between multiple applications and T&M instruments, and permits targeted analysis with the aid of efficient filters.
26-May-2020 | AN-No. 1DC02
3GPP TS25.141 defines conformance tests for W-CDMA base stations (including HSPA+ features). This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators and CW sources from Rohde & Schwarz. One test additionally requires a spectrum analyzer from Rohde & Schwarz.Example illustrates manual operation. A free software program enables and demonstrates remote operation. The W-CDMA base station transmitter (Tx) tests (TS25.141 Chapter 6) are described in Application Note 1MA67.
21-Oct-2014 | AN-No. 1MA114