8432 Results
Initialize RF Generator, change start level for immunity testing using EMC32
Interruptions in the RF level when the signal changes
RTB, RTM, RTA: Acquire Mode "High Resolution" looses details?
DTMF analysis on CMW500 and CMW290
Easy remote control of latest Rohde&Schwarz signal generators
I/Q mode data transfer
Which sampling rates are available for the mesurements?
What is the default RAW socket port?
Where to find the latest version of CMW software tools like MARS, MARS Viewer, MCT Message Recorder UICC Tool.
FSQx: How to Measure the Bandwidth of a Transmission Channel
We are using the HMC8012 for automatized tests. I have tried using both the fetch as well as the read commands, but the response time from the device is still about 1 second before any value is returned. Is it possible to have a faster response time than this?
With version 1.7.20 we made changes to some parameters which lead to incompatibility with elder savesets.
In the manual of your oscilloscopes you state: If AC coupling is set, the attenuation of passive probes has no effect, and voltage is applied to the instrument with factor 1:1
I do RMS measurement on a signal after switching the channels. Even with *OPC? or *WAI the result is implausible: 9.91e+37 . How can I get a correct result?
My HMExplorer script is not running while all commands are OK, why?
EMC32 with Angle Offset for the second Antenna Mast
Connecting power sensors
On the screen of my HMO30XX appears “Avg. #2”. What is the meaning of that?
Convert the trace data in a dataset file (*.SET) to a CSV file
How to export Touchstone s2p files?
How to use the 'MODE' , 'Logger' with the scope function in the RTH scope rider
I would like to be sure about the high impedance state of a dedicated channel for my power supply unit. Do you have a process to test and to ensure that? Can you also please explain, how the high impedance mode works?
I want to do a calibration with 75 Ohms at the ZNB/ZND/ZVA. Do these VNAs accept the auto cal unit ZV-Z53 with 75 Ohms impedance?
In the datasheet of the HMP series i could not find any information concerning the MTBF time of the relay switching the output power. Do you have any further information available?
Bluetooth Reciver Intermodulaton- and Blocking Performance tests fail with every DUT when using an external signal generator to generate the interferer signals.
Using my Turntable the Final Adjustment works on full range (from -180 to +180°) , also if I have defined a "predefined range" of 60°-
To measure the time between the pulses I need a slow time base of 200 ms/div. Is there a way to get them visible with new scopes?
When yout set the carrier frequency and the filter bandwidth, you get the warning "CF + BW/2 > DevBW".
What kind of FFT filter is used within the FSV?
The EZ-17 has a 12 pin connector