770 Results
The R&S®RT-ZISO isolated probing system sets new standards for isolated probe technology. The innovative solution delivers unparalleled accuracy, sensitivity, dynamic range and bandwidth, while enabling next-generation wide bandgap (WBG) SiC and GaN power designs. The remarkable performance at the core of the solution provides precise differential measurements up to ±3000 V on reference voltage levels of ±60 kV with rise time of < 450 ps. Most importantly, the solution can suppress fast common mode signals that distort and disturb accurate measurements.
R&S®Time Code Inserter: Time Code-Based A/V Distortion Analysis
16-Apr-2013 | AN-No. 7BM84
I use my HMC8015 to log the measurement over a longer time. Can you please specify the logging time accuracy for the HMC8015 Power Analyzer? How stable is the time base?
Rohde & Schwarz User Manual for R&S®FSW Real-Time Measurements; provides all the information specific to the Real-Time application.
To measure the time between the pulses I need a slow time base of 200 ms/div. Is there a way to get them visible with new scopes?
When I export the time domain trace the stimulus values are in Hz, but not in seconds as shown on the screen. How can I get the export in time or distance?
HM8123 - measurement of pause time / reverse pulses
Rohde & Schwarz User Manual for R&S®ESW-K55 Real-Time Measurements; provides all the information specific to the Real-Time application.
The R&S®CMP200 radio communication tester together with the R&S®CM-Z300A time of flight kit provides an accurate setup for time of flight measurements – in validation, calibration and certification.
27-Jul-2022
Rohde & Schwarz User Manual for R&S®ESW-K55E Real-Time Spectrogram Application; provides all the information specific to the R&S®ESW-K55E Real-Time Spectrogram application.
HMC8012 - Display current and voltage measurement at the same time
The analog demodulation measurement application R&S®FSxx-K7 performs frequency and phase settling time measurements using a modern wideband concept..
18-Jun-2022 | AN-No. 1EF112
I am using the ultra segmentation mode to minimize the blind time. But this is not indicated. Is there a way to calculate it?
We are using the HMC8012 for automatized tests. I have tried using both the fetch as well as the read commands, but the response time from the device is still about 1 second before any value is returned. Is it possible to have a faster response time than this?
I would like to measure the voltage at a certain time of a captured waveform. Do I need to use the cursor function? May I ask for the SCPI commands?
Time Domain Scan without Autoranging
White Paper: Implementation of Real-Time Spectrum Analysis with R&S FSW and R&S FSVR
20-Mar-2015 | AN-No. 1EF77
The paper compares the measurement speed and level measurement accuracy of a conventional stepped frequency scan versus an advanced FFT-based time domain scan.
29-Jan-2014 | AN-No. 1EE24
This application note explains the background of blind time and points out why a high acquisition rate is important. It furthermore explains the R&S RTO oscilloscope capabilities and how they help for faster debugging, measurement and analysis.
17-May-2011 | AN-No. 1ER02
Delta Time Accuracy Calculation for my Oscilloscope
Compensate signal losses from test fixtures or cables in real-time. Compensate signal losses from test fixtures or cables in real-time. The RTP oscilloscope extends traditional de-embedding capabilities with flexible filter structures directly in the acquisition path. This allows waveform correction in real time.
CMA180 lower down measurement time for AF Signal using SCPI commands
These are the steps to perform the desired measurement.
How to configure a external trigger at CMW500, CMW290, CMW270 to synchronize with LTE signal time frames
Export complex data of a trace with mathematics and time gating.
Cannot use internal display and external monitor together at the same time.
Which settings should I use for the Transform Time Domain mode?
Time Domain Measurements using Vector Network Analyzer ZVR
04-Aug-1998 | AN-No. 1EZ44
Measurement of Frequency Settling Time of Synthesizers and Transmitters
12-Feb-1999 | AN-No. 1MA15