8448 Results
Measurement of Clicks on Audio Lines using the Audio Analyzers UPL or UPD
04-Jun-1998 | AN-No. 1GA31
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
Learn more about the R&S®SFC and how it supports all conventional digital and analog TV and audio broadcast standards.
19-Feb-2015
Test, calibrate and verify automotive radar sensors with the R&S®ATS1500C antenna test system and the R&S®AREG100A radar echo generator.
13-Jan-2020
This Application Note gives a short overview how signals with two different modulation schemes can be analyzed using the R&S®FSW.
18-Apr-2016 | AN-No. 1EF93
The R&S ® EDST300 efficiently and precisely analyzes TACAN and DME ground stations, making it ideal for commissioning and regular maintenance.
16-Feb-2017
Automatic monitoring of radio signals interfering with sensitive devices in hospitals
04-Sep-2006
GSM Measurements with the R&S CMU200 and CMUgo
24-May-2005 | AN-No. 1CM57
This application note addresses the diverse possibilities of interoperability between Rohde & Schwarz power sensors and Rohde & Schwarz signal generators. All current and many legacy Rohde & Schwarz signal generators offer the capability of directly connecting power sensors. This enables power measurements without the need of a base unit or separate PC to display the readings. Furthermore, sensors can be used for special tasks like filling a user correction table or continuously controlling levels at crucial points in the measurement configuration.
31-Aug-2023 | AN-No. 1GP141
To generate a full channel load, as necessary for DVB-C2 receiver tests for example, only two Rohde & Schwarz instruments, the R&S BTC and R&S CLG, are necessary.
30-Jul-2013 | AN-No. 7BM88
The R&S®QAR50 is the ideal tool to characterize the material properties of polymers and their influence on the quality of the radar signal at an early design stage and in quality control of material development.
24-Jun-2022
Heinz Mellein, Manuel Mielkech 8NT01 MIMO Channel,Field Measurements,MIMO Evaluation,R&STSMx,R&SROMES Assessing a MIMO Channel Heinz Mellein, Manuel Mielkech 8NT01 MIMO Channel,Field Measurements,MIMO Evaluation,R&STSMx,R&SROMES Related products
31-Aug-2017 | AN-No. 8NT01
IQWizard - IQ Signal Measurement and Conversion
26-Apr-2013 | AN-No. 1MA028
Next generation technologies in radar and satellite communication with high data rates call for innovative testing solutions to develop and manufacture RF components like voltage controlled oscillators (VCO). The R&S®FSPN phase noise analyzer increases efficiency and reproducibility of VCO characterization and phase noise measurements from lab to production.Voltage controlled oscillators are oscillators whose output frequency is controlled by means of an external tuning voltage, and they are used in a wide variety of electronic and RF applications like function generators, phase-locked loops including frequency synthesizers used in communication equipment. Different VCO design approaches yield different parameters and performance, and therefore it is important to measure or characterize VCOs under different conditions. This application note provides a short technical introduction to voltage controlled oscillators and explains the most common and the most important measurements made during the VCO characterization process.
17-May-2023 | AN-No. 1SL386
The R&S®FSW signal and spectrum analyzer facilitates swept spectrum analysis of next generation SARs with true preselection, finer range resolution and image rejection.
16-Apr-2021
Importing Data in ARB, Custom Digital Modulation and RF List Mode
22-Dec-2010 | AN-No. 1GP62
With their included component tester, the R&S®RTC1000 oscilloscopes are universally deployable in development and educational environments.
20-Dec-2017
Battery simulation tool for R&S®NGM200/NGU201 power supplies
02-May-2023
The R&S®NGU401 source measurement unit (SMU) is ideal to perform reverse polarity tests which are specified as part of ISO 16750‑2, plus it provides automated testing capability.
23-May-2022
Automatic monitoring of radio signals at airports interfering with radio services
04-Sep-2006
Lip-Sync Measurement (AV Delay) for TV Displays
21-Apr-2010 | AN-No. 7BM77
3-Port Measurements with Vector Network Analyzer ZVR
04-Aug-1998 | AN-No. 1EZ26
This application note gives a short introduction to NB-IoT (Internet of things) and shows the easy measurements with Rohde & Schwarz instruments like transmitters and test receivers.
30-Jun-2017 | AN-No. 1MA296
Its dual-path concept and high-power signal generation up to 20 GHz make the R&S SMW200A vector signal generator ideal for efficient testing of blocking characteristics.
30-May-2014
Analog and digital audio measurements with the R&S CMW.
20-Jun-2013
Correlated time-frequency measurements help optimize gate driving and minimize electromagnetic emissions early on during development.
22-Nov-2018
The R&S®RTO oscilloscope is the perfect solution for measurement applications that require further remote processing.
15-Feb-2018
For system verification and debugging, eye diagram measurements are the most important tools for efficiently analyzing the signal integrity in any digital design
19-Feb-2019
Tests of Audio Amplifiers in Accordance with Standard IEC 60268-3
13-Feb-2008 | AN-No. RCS0704-0032
This application note describes a method using the R&S®ZNA analyzer family to measure group delay of mixers and frequency converters with an embedded local oscillator very accurately.
11-Jul-2019 | AN-No. 1EZ81