8448 Results
PESQ<sup>®</sup> Measurement for WCDMA with R&S<sup>®</sup>CMUgo
05-Jan-2012 | AN-No. 1MA137
This application note describes Battery Life Measurements with the R&S®RT-ZVC02/04 Multi-Channel Probe. The measurements are described with the use of an oscilloscope.
17-Jan-2019 | AN-No. 1TD07
Generating and Analyzing CDMA2000 Signals
27-Mar-2001 | AN-No. 1MA34
In addition to the generic edge trigger, modern oscilloscopes offer triggers that are specialized to address specific problems.
04-Jan-2016
In this application note we explain how to test FPGA-based hardware emulators using Rohde & Schwarz vector signal generators for creating suitable real-time test signals at reduced sample rates. We further explain how to correctly adapt AWGN signal generation and fading simulation for “slow I/Q”.
10-Dec-2012 | AN-No. 1GP95
LTE user equipment (UE) receiver performance has significant impact to cellular radio network coverage and capacity. It determines the maximum data throughput across the air interface between the LTE base station (eNB, evolved node B) and the mobile network subscriber UE, thus it determines the total capacity across the air interface. Therefore, it is one of the most important measurements to verify the actual receiver performance of individual devices, and a key metric to compare different devices, in particular.This paper shall give an introduction to receiver performance measurements and discusses the measurement metrics as well as the challenges of over the air (OTA) measurements.
31-Aug-2017 | AN-No. 1ST001
he option R&S EMC32-K84 extends the internal report generator to support the generation of a summary test report over all selected test cases done for a DUT.
23-Apr-2015 | AN-No. 1SP09
Generating 3GPP Multi Carrier Signals for Amplifier Tests with R&S SMIQ03HD and WinIQSIM™
02-Sep-2002 | AN-No. 1GP52
Rohde & Schwarz offers a flexible test solution for the high demands of R&D and highthroughput production environments.
21-Mar-2017
Verifying RF ports is crucial for minimizing lost power and maximizing battery life. The R&S®FPC1500 is an easy-to-use and costeffective tool for this type of verification.
05-Mar-2020
CERTIUM VCS is a purely IP based communications infrastructure that can be used to address shelter scenario challenges.
14-Jun-2023
Guidelines for MIMO Test Setups – Part 2
14-Oct-2009 | AN-No. 1GP51
This application note describes how to measure the antenna pattern of a mm-Wave device in the R&S®ATS1000 shielded chamber. This includes the required calibration of the measurement setup and a possible near field to far field transformation when measuring larger devices.
28-May-2018 | AN-No. 1MA304
conducted conformance testing according to TS 38.141-1, Rel. 16
This application note describes how all mandatory RF performance tests (TS 38.141-1), according to Release 16, can be performed quickly and conveniently with signal generators from Rohde & Schwarz
24-Oct-2019 | AN-No. GFM315
Transmitter and Receiver Measurements on Bluetooth Modules with CMU200
06-Aug-2001 | AN-No. 1MA46
Load pull is a powerful method to characterize RF power amplifiers and enablse model extraction and validation and performance, ruggedness and efficiency testing.
02-Sep-2020
This application note provides a brief summary of the transmission modes (TM) in LTE and describes the beamforming measurements for base stations (BS) and user equipment (UE). The T&M options using various Rohde & Schwarz instruments are also presented.
26-Apr-2013 | AN-No. 1MA187
Measurement of Transient Responses in AGC Circuits using the Audio Analyzers UPL and UPD
04-Jun-1998 | AN-No. 1GA32
This application note highlights various aeronautical radio navigation signals such as VHF omnidirectional radio range (VOR), instrument landing system (ILS) for glide slope (GS) and localizer (LLZ), as well as marker beacon (MB).
01-Feb-2012 | AN-No. 1MA193
This application note examines both the theory and practice of state-of-the-art spectrum analysis by discussing specific measurements taken on an integrated RF amplifier.
05-Mar-2013 | AN-No. 1MA201
EMI debugging using fast FFT with MXO oscilloscopes
07-Feb-2024
This application note explains step by step all necessary settings for transmitting parameters of the disturbance signal from an EMS test to a dAV Camera System via serial port or LAN interface
10-Dec-2019
High throughput is the key production metric for efficient operation. Improving test speed helps reduce the cost per device. The R&S®PVT360A performance vector tester is optimized for high speed production tests.
12-Apr-2023
This document provides information on the techniques used to calibrate the FSMR3000 signal source. It also describes the process used to remove measurement uncertainties.
31-Dec-2021 | AN-No. 1SL377
This application note illustrates the operation of the OFDM measurement software R&S FSQ-K96. It describes applications, setup, features, settings and results.
17-Oct-2008 | AN-No. 1EF65
Combining a low-noise oscilloscope with a power rail probe, developed uniquely for measuring power rails, provides a measurement system that delivers measurements that are more accurate.
09-Jul-2020
This application note describes how to use the LTE Frequency Division Duplex (FDD) and Time Division Duplex (TDD) measurement functionality.
09-Apr-2015 | AN-No. 1CM103
Remote Emulation with the R&S<sup>®</sup>SGT100A SGMA Vector RF source
11-Oct-2016 | AN-No. 1GP109
Generating Bluetooth RF Test Signals with SMIQ Signal Generator
30-Jan-2001 | AN-No. 1MA31
Ensure a high level of performance and reduce performance degradation of automotive radar sensors caused by radomes and bumpers with the R&S®QAR50.
21-Apr-2022