8448 Results
CDMA2000® 1xRTT/1xEV-DO Hybrid Mode Testing
01-Oct-2007 | AN-No. 1CM65
his application note briefly describes the technology behind ERA-GLONASS and presents conformance tests for ERAGLONASS using the R&S®CMW500 RF tester and the R&S®SMBV100A vector signal generator.
24-Jan-2018 | AN-No. 1MA251
Automotive field-to-lab testing with R&S®CMWcards
19-Feb-2019
This application note describes the functionality of the equalizer filter and how to set the filter parameter manually in an accurate and fast way.
06-Feb-2009 | AN-No. 1EF61
Comprehensive PCR Analysis - Using the R&S DVM Family from Rohde & Schwarz R&S DVM50/DVM100/DVM120/DVM400
01-Jun-2006 | AN-No. 7BM55
CMUCopy - Transferring CMU Hardcopy to PC using the IEEE Bus or the serial interface
28-Aug-2009 | AN-No. 1MA45
The validated UWB PHY test suite for the R&S®CMP200 radio communication tester simplifies FiRa™ Consortium PHY conformance testing.
21-Jun-2022
R&S CMWrun - RF preconformance testing solution
20-Feb-2015
This application note explains how to connect and interface with the SGMA instruments and gives some recommendations and hints about their use.
15-Oct-2015 | AN-No. 1GP103
DVB-T signal quality is determined by measuring the modulation error ratio (MER). However, a poor MER does not indicate its causes since different interference factors overlap at the transmitter when a signal is generated and transmitted. The R&S®ETL TV test receiver now has a unique new measurement capability that makes it possible to demonstrate to what extent the modulator's phase noise affects the MER.
13-Jul-2012
Combinational tests for telephone terminal equipment
26-Apr-2006
NTP and ACP Measurements to ETS 300 175-2 for DECT using Spectrum Analyzer FSE
28-Apr-1998 | AN-No. 1EF42
The LTE C-V2X Scanner provides customers an opportunity to verify, test, and optimize ITS traffic systems (RF KPIs and decoded ITS message content).
21-Oct-2022 | AN-No. 8NT07
Characterize radar warning receivers with advanced triggerbased multichannel pulse analysis, using the R&S®VSE-K6A and a Rohde & Schwarz oscilloscope.
02-Mar-2021
This application note provides basic information about frequency and phase settling time measurements and how the measurement is implemented inside modern phase noise analyzers.
28-Jun-2018 | AN-No. 1EF102
Inside the lab and on the production line – this Rohde & Schwarz solution offers speed, accuracy and convenience for testing TX beamforming passive array antennas.
04-May-2018
Using MATLAB for Remote Control and Data Capture with R&S Spectrum and Network Analyzers
24-Sep-2007 | AN-No. 1EF46
Connecting simulation and measurements on physical devices
This application note is based on collaborative work between MathWorks® and Rohde & Schwarz. The focus is on linearization of a non-linear device, in our case the RF power amplifier.
05-Aug-2021 | AN-No. 1SL371
Measurements on 3GPP WCDMA User Equipment According to Standard TS 34.121
10-Dec-2008 | AN-No. 1MA68
Verify the energy efficiency of your O-RAN radio units
19-Mar-2024
Rohde & Schwarz Realtime deembedding with the R&S®RTP
25-Sep-2018
Calibrating the CMD Output Level for BER
10-Mar-2000 | AN-No. 1MA24
Two R&S ETL TV analyzers or two R&S ETC compact TV analyzers are used to measure the receive level of a car antenna against that of a reference antenna. The R&S BCDRIVE broadcast drive test software exports measured data for display in Google Earth.
19-Feb-2015
Remote Emulation with the R&S<sup>®</sup>NRP2 Power Meter
28-Feb-2012 | AN-No. 1GP83
Signal generators and signal analyzers help open up the Wi-Fi 7 signal world and allow initial component and module testing for this new standard.
30-May-2022
This application note describes how all required performance tests can be performed quickly and easily by using vector signal generators.
11-May-2016 | AN-No. 1MA162
The R&S®Pulse Sequencer software offers an easy way to simulate moving radar emitters and a moving receiver for EW receiver tests.The software together with the R&S®SMW200A vector signal generator is a powerful radar simulator
18-Sep-2018
For A/V devices such as smartphones, tablet PCs, Blu-ray players, set-top boxes and TV sets, the perceived video quality must satisfy very high standards. A/V devices need to hold their own in three main areas: ı Stability (environmental influences, response to source signal disturbances, etc.) ı Performance (switching times, delays) ı Compliance with standards (input and output formats) Any deviations from the expected video and audio output can be automatically and precisely detected with R&S A/V distortion analysis on all common analog and digital interfaces such as HDMI™ and MHL™. This document examines the relevant setups and configurations.
15-Oct-2014 | AN-No. 7BM87
Define the exact current profile to minimize your electronics device´s power consumption with the R&S®NGM200 power supply series.
10-Dec-2020
The R&S®SMW200A GNSS simulator offers an easy and convenient way to test your receiver design against a wide variety of potential interferers and jammers.
28-Jan-2019