1828 Results
Even if AI audio assistants have been listening and responding for many years, using AI and ML for signal processing tasks in wireless communication is in its infancy. This video introduces the background theory and terminology of AI and ML. Think Six, video series This video introduces the background theory and terminology of AI and ML.
This means that it needs bandwidths that are much wider than what is being used today for 4G LTE or 5G. THz communication (100+ GHz) is being researched to meet this requirement. Measurements for wireless communication systems is very complex, especially for frequencies above 100 GHz. These higher frequencies represent a new territory for communication and requires new measurement equipment.
For this video, we will be using a 2 GHz R&S®RTO oscilloscope, an 8 GHz R&S®ZND two-port VNA as well as the R&S®ScopeSuite automated test software. Webinar, Automotive, Ethernet This webinar will focus on 1000BASE-T1 automotive Ethernet compliance testing based on the Open Alliance (OA) TC8 specification for the physical layer.
These results can also be used in math functions. oscilloscope, rto oscilloscope, rto6, 6 ghz oscilloscope, oscilloscope automotive, oscilloscope emi The R&S®RTO6 helps you to tackle novel, complex measurement issues.
Learn more about time domain reflectometry (TDR) and time domain transmission (TDT) for signal integrity applications using the R&S®ZVA vector network analyzer from Rohde & Schwarz. This video series demonstrates the calibration of a four-port network analyzer and the measurement of rise time, impedance vs. distance and skew on a board with differential lines.
Digital workflows at Cineteca Nacional with Rohde & Schwarz products - Flyer
This gave the ICARUS project partners the idea of using the ISS as a remote station for the animals to be observed. The hub of the ICARUS system is the International Space Station (ISS). It travels in a virtually circular orbit.
EMI measurements, conducted, K54, EMI pre-compliance, FPL This video gives a short introduction into conducted EMI pre-compliance measurements using the EMI Measurement Application K54.
Predefined patterns for e.g. I²C, SPI, UART and CAN/LIN can be used. R&S®RTC1000 video, oscillsocope, test and measurement, Rohde und Schwarz R&S®RTC1000 - Waveform and pattern generator
This video shows how to perform such coexistence tests using R&S’s high-end GNSS simulator R&S®SMW200A. video,SMW200A, GNSS simulation The performance of GNSS receivers must be validated and characterized not only under ideal conditions, but also in the presence of other communication signals like GSM, UTMS or LTE.
To demonstrate the NG-eCall functionality the CMX OBT and SMBV together with the KA09x Software is used for testing the whole functionality for an In-Vehicle-System.
23-Mar-2022
Rohde & Schwarz raises the bar on delivery of fully integrated communications to RANDelivery of first Enhanced Cape Class Patrol Boat (ECCPB) to the Royal Australian Navy by Austal marks important achievement for communication systems integrator Rohde & Schwarz Australia. NAVICS
24-Feb-2023
Rohde & Schwarz targets a sustainable and connected future with 5G Broadcast at MWC23Rohde & Schwarz targets a sustainable and connected future with 5G Broadcast at MWC23
23-Mar-2023
Rohde & Schwarz HF beyond line of sight communications make vast Norwegian landscape accessibleRohde & Schwarz to supply liquid-cooled HF high-power transmitters to Norway for reliable and secure beyond line of sight (BLOS) communications in difficult terrain.
It demonstrates how to test a discrete transceiver for 5G NR based on the latest data converters from Texas Instruments, the DAC38RF82 and the ADC12DJ3200, using the R&S®SMA100B RF and microwave analog signal generator, the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz.
Learn more about time domain reflectometry (TDR) and time domain transmission (TDT) for signal integrity applications using the R&S®ZVA vector network analyzer from Rohde & Schwarz. This video series demonstrates the calibration of a four-port network analyzer and the measurement of rise time, impedance vs. distance and skew on a board with differential lines.
Measurement accuracy and resolution depend on the radar sensor and the used waveform. Automotive radars often apply continuous wave signals of high bandwidth in combination with digital beamforming techniques to measure range, radial velocity and azimuth angle unambiguously and in multitarget situations.
It is also demonstrated how CRPAs can be tested using R&S’s high-end GNSS simulator R&S®SMW200A. video,SMW200A, GNSS simulation This video shows how to perform advanced interferer simulations for testing multi-antenna GNSS receivers with anti-jam capabilities, also known as Controlled Reception Pattern Antennas (CRPAs).
In this video, we demonstrate the multi-baseband capability of the R&S SMW200A vector signal generator to generate the wanted and the interfering signals for FR2 in one instrument. 5G NR Inband Selectivity Measurement | Rohde & Schwarz Generate wanted and interfering signals in one instrument using R&S SMW200A vector signal generator to test adjacent channel selectivity of a BS receiver
Instrument automation and result evaluation are based on R&S®Quickstep sequencing software and R&S®VSE signal analysis software, which has been speed optimized for cloud operation using so-called micro-services.
R&S VSE-K10x / FSx-K10x, FS-K10xPC EUTRA/LTE Measurement Application - Specifications
Testing Direction Finding Devices Using R&S®Pulse Sequencer and R&S®SMW-K545 This video shows how to define a Direction Finding scenario in the R&S®Pulse Sequencer software and how to replay the scenario on a 4 channel R&S®SMW200A setup that has been aligned in terms of amplitude, delay and phase.
We show how the SMW200A can be used to easily configure 5G NR signals to test DUTs and to achieve excellent EVM measurements without the need for any extensive calibration procedures. EVM, Optimize EVM, 5G NR, signal generator, signal analyzer, 5G, Component Testing, FR2, SMW, FSW Easy and optimized EVM measurement of 5G NR signals
Learn more about time domain reflectometry (TDR) and time domain transmission (TDT) for signal integrity applications using the R&S®ZVA vector network analyzer from Rohde & Schwarz. This video series demonstrates the calibration of a four-port network analyzer and the measurement of rise time, impedance vs. distance and skew on a board with differential lines.
QualiPoc Android supports the latest technologies and services such as video over LTE (VoLTE) and voice calls using EVS codec.
The radio unit activity versus power consumption is monitored using the R&S RTO oscilloscope to detect short power pulses or spikes. The results make it easy to evaluate energy efficiency measures such as advanced sleep modes and provide ratings for radio units based on their power consumption.
30-Aug-2022
Rohde & Schwarz and Qualcomm spearhead live 5G Broadcast streaming to smartphones at IBC 2022Rohde & Schwarz and Qualcomm spearhead live 5G Broadcast streaming to smartphones at IBC 2022 . A clear demonstration of the potential of 5G Broadcast/Multicast to redefine content delivery and create new revenue streams.
05-Nov-2020
Eurofins partners with Rohde & Schwarz to bring Advanced Testing Kit to High Speed Interface Compliance Test ProgramsEurofins Digital Testing, a global leader in end-to-end quality assurance and testing services, and Rohde & Schwarz, a leading test and measurement expert, are working closely together to give customers access to the latest High-Speed Signal Analysis and Compliance Testing tools using the R&S RTP164 high performance oscilloscope. These will give Eurofins a competitive edge in testing high-speed interoperability. They will further provide certification services for high-speed communications technologies including USB.
16-Mar-2020
Rohde & Schwarz enables sub-THz ultra wideband signal analysisRohde & Schwarz is paving the way for research in the terahertz frequency range by demonstrating multi gigabit data transmission in the D-Band at 140 GHz. The setup features the R&S FSW high-end signal and spectrum analyzer equipped with an R&S FSW-B8001 option, supporting an unparalleled 8.3 GHz internal analysis bandwidth. This new hardware option will be available soon from Rohde & Schwarz.