8398 Results
This document describes WLAN tests which rely on communication (signaling) between R&S CMW and device under test (DUT) and on transmission of packet data over WLAN. On the R&S CMW side the WLAN Signaling application is required, for some tests also the Data Application Unit (DAU). The test principles and the necessary settings are explained and background infor-mation is given. Step-by-step procedures are provided for the main configuration tasks.
08-Feb-2016 | AN-No. 1C107
Testing radar warning equipment in realistic scenarios is crucial to reliable field performance. Commercial vector signal generators (VSG) such as the R&S®SMW200A from Rohde & Schwarz have become a very attractive alternative thanks to their increased available bandwidth and processing power.
13-Aug-2020
Increase the IP connection security of your IoT device
04-Apr-2017
Combining a low-noise oscilloscope with a power rail probe, developed uniquely for measuring power rails, provides a measurement system that delivers measurements that are more accurate.
09-Jul-2020
The application note guides developers and manufactures of Sigfox Devices to perform the required and recommended measurements with test solutions from Rohde & Schwarz.
15-Nov-2017 | AN-No. 1MA294
Generating the Noise Field for Ambient Noise Rejection Tests
12-Oct-2010 | AN-No. 1GA51
This application note describes a measurement-based development methodology by which the Doherty Amplifier may be enhanced.
26-Sep-2016 | AN-No. 1MA279
Primer
selection of appropriate RF power sensor
26-May-2021
Verifying RF ports is crucial for minimizing lost power and maximizing battery life. The R&S®FPC1500 is an easy-to-use and costeffective tool for this type of verification.
05-Mar-2020
Usage of VISA for instrument control with USB and ethernet
28-Oct-2021 | AN-No. 1SL374
Rohde & Schwarz makes the simulation of complex coexistence scenarios simpler than ever before, thanks to a quick and easy setup of complex interference scenarios.
18-Mar-2019
With the R&S®Pulse Sequencer radar simulation software, users can easily and intuitively create scenarios for simulation of angle of arrival (AoA).
02-Apr-2020
This application note shows how to use Rohde & Schwarz signal generators and analyzers for testing early 5G New Radio components, chipsets and devices. Methods for easy creation and analysis of custom OFDM are explained.
23-Oct-2017 | AN-No. 1MA308
conducted conformance testing according to TS 38.141-1, Rel. 15
This application note describes how all mandatory RF receiver tests can be performed quickly and conveniently with signal generators from Rohde & Schwarz.
02-Dec-2020 | AN-No. GFM314
Obtain fast data reading for realtime filter tuning with the R&S®ZNB vector network analyzer from Rohde & Schwarz.
27-Nov-2019
The R&S®RTH-K38 user scripting software option makes the R&S®ScopeRider RTH handheld oscilloscope a powerful tool for maintenance and service applications.
06-May-2020
With high precision, an intuitive user interface and uncertainty bands provided directly on the screen, the R&S®ZNA takes accuracy to a new level.
19-Jul-2021
R&S CompactTSVP Industrial Test and Measurement Chassis - Product Brochure
Rohde & Schwarz presents the R&S®ATS1000 antenna test system, a highly accurate solution for testing 5G antennas up to mmWave frequencies in a mobile shielded chamber.
17-Oct-2017
This application note describes the technology behind NG eCall and presents conformance tests for NG eCall using the R&S®CMW500 RF tester.
06-Jun-2019 | AN-No. GFM312
The IP connection security analysis solution for the R&S ® CMW500 platform identifies IP connection vulnerabilities in telematics units at an early stage of development.
18-Jul-2017
This document provides some technical background and guidance on how to optimize the measurement of one of the key performance parameters of WLAN transmitters - the Error Vector Magnitude (EVM).
This application note provides some technical background on how to optimize the measurement of one of the key performance parametersof 802.11be WLAN transmitters.
06-Sep-2022 | AN-No. 1EF114
The measurements are straightforward and easily accomplished with off-the-shelf Rohde & Schwarz signal generators and signal and spectrum analyzers.
15-Nov-2018
This application note shows developers and manufacturers of devices with LoRa wireless technology how transmitter measurements are conducted in line with FCC Part 15.247.
29-Nov-2017 | AN-No. 1MA295
Measurement of phase-, timing- and gain offset between 2 signals using multiple spectrum analyzers
28-Sep-2010 | AN-No. 1EF70
This application note describes Battery Life Measurements with the R&S®RT-ZVC02/04 Multi-Channel Probe. The measurements are described with the use of an oscilloscope.
17-Jan-2019 | AN-No. 1TD07
This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.
26-Apr-2013 | AN-No. 1GP94