8398 Results
This application note describes a method using the R&S®ZNA analyzer family to measure group delay of mixers and frequency converters with an embedded local oscillator very accurately.
11-Jul-2019 | AN-No. 1EZ81
The R&S®ZNB measures the signal integrity on the PCB, taking the needed test fixtures and probes into consideration – a complete solution in a compact format.
25-Mar-2020
R&S®Server-Based Testing helps reduce test times for 5G New Radio multicarrier signals - each component carrier can be analyzed independently and in parallel.
13-Sep-2021
This application note shows how to measure the phase accurately between several signals using vector network analyzers of the R&S®ZNA, R&S®ZNB and R&S®ZNBT families.
11-Jul-2019 | AN-No. 1EZ82
Bluetooth® Low Energy channel sounding validation
06-Sep-2023
It is extremely important to test the application level functional performance of home automation products in the presence of interference.
11-May-2020
Interference hunting in TDD networks
03-Feb-2020
Load pull is a powerful method to characterize RF power amplifiers and enablse model extraction and validation and performance, ruggedness and efficiency testing.
02-Sep-2020
Calibration Tool for PESQ Speech Quality Tests
30-Jun-2011 | AN-No. 1GA50
conducted conformance testing according to TS 38.141-1, Rel. 16
This application note describes how all mandatory RF transmitter tests according to Release 16, can be performed with signal or spectrum analyzers from Rohde & Schwarz.
27-Jan-2021 | AN-No. GFM313
Measure and analyze signals with the R&S®FSW Signal and Spectrum Analyzer platform in collaboration with an R&S®RTO Digital Oscilloscope.
16-Jun-2015 | AN-No. 1EF92
Comprehensive test solutions guide for production and R&D
Small cell is a compact base station with smaller form factor and lower transmission power in comparison to the conventional macro base station. It covers relatively small area and serves less users. Usually, small cell can be integrated into the existing mobile network. By the evolution of radio access technology, the role of small cell has been changing through the evolution path. In the 2G/3G time, its role was to provide coverage in corner cases. Later during LTE, networks are not just providing coverage but capacity too. Small cells were then used to provide the addition capacity where required without adding additional spectrum. Now in 5G era, network operators use densification as an important strategy to provide seamless 5G services which demand coverage, capacity and performance too. With use cases requiring the 5G millimeter wave (mmW) rollouts, it makes sense to use small cells for densification due to the propagation characteristics of mmW.In this application note, we will shed light on the testing aspects of a small cell throughout the product life cycle with particular focus on the production test solution for the small cell device under test (DUT) in FR2 (frequency range 2, mmW frequency band) in Over the Air (OTA) environment for option 6 split based on radio communication tester R&S®CMP200 and OTA chamber R&S®CMQ200. The document is complemented with more insights into test solutions used in typical R&D test applications towards the second half of the application note.
19-Jun-2023 | AN-No. 1SL395
Fast Scalar Network Analysis Using a Signal Generator and a Power Meter
14-Jul-2006 | AN-No. 1MA101
radiated conformance testing according to TS 38.141-2, Rel. 16
3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141.
30-Jun-2020 | AN-No. GFM325
Measurement of WLAN 802.11 ac signals
22-Sep-2011 | AN-No. 1EF82
Cell search and cell selection in UMTS LTE
17-Sep-2009 | AN-No. 1MA150
This application note contains theoretical background on OTA power and pattern measurements in the context of 5G and beam steering.
29-Aug-2017 | AN-No. 1GP118
How to work with acquired waveform data in Python using the R&S®RTP, R&S®RTO or R&S®RTE.
12-Jan-2022
This application note gives a short introduction to NB-IoT (Internet of things) and shows the easy measurements with Rohde & Schwarz instruments like transmitters and test receivers.
30-Jun-2017 | AN-No. 1MA296
This application note and associated application software may be used to conduct psychoacoustic speech quality evaluation for Voice over LTE (VoLTE) connections. The measurements are based on recommendations ITU-T P.862 and ITU-T P.863. The included software sequence performs decoder/encoder calibration, connection setup for the UE under test and subsequent speech quality analysis.
21-Feb-2014 | AN-No. 1MA204
It is recommended to use jitter measurement instruments for both the time and frequency domain in order to differentiate between fast and slow moving artifacts.
22-Aug-2017
Probes and accessories for Rohde & Schwarz oscilloscopes - Product Brochure
The R&S®ZNH handheld vector network analyzer with a built-in source allows fast, convenient on-site measurements on the ILS antenna system.
09-Aug-2021
This application note explains how to test your remote radio head with Rohde & Schwarz test and measurement equipment.
05-Aug-2013 | AN-No. 1GP78
Time-of-arrival (ToA) and Time-Alignment-Error (TAE) are important network synchronization measurements to achieve high network quality and performance.This educational note describes how 5G NR is affected by these synchronization requirements.
17-Aug-2021 | AN-No. 8NT05
Rohde & Schwarz mobile network testing provides a unique combined test solution that accurately measures the DL coverage using network scanners.
20-Feb-2018
This application note summarizes the Rohde &Schwarz test solutions for LTE-Advanced (Release 10) using Vector Signal Generators, Signal and Spectrum Analyzers and the Wideband Radio Communication Tester.
03-Sep-2014 | AN-No. 1MA166
Machine learning use cases like network utilization rating and call stability score extract insights from network data analytics enabling network optimization
28-Feb-2024 | AN-No. 8NT10
This application note provides a brief summary of the transmission modes (TM) in LTE and describes the beamforming measurements for base stations (BS) and user equipment (UE). The T&M options using various Rohde & Schwarz instruments are also presented.
26-Apr-2013 | AN-No. 1MA187