Videos

MultiGBASE-T1 testing according to the OA TC9 draft release on a MDI test head

MultiGBASE-T1 testing according to the OA TC9 draft release on a MDI test head MultiGBASE-T1 testing according to the OA TC9 draft release on a MDI test head MultiGBASE-T1, OA TC9, MDI test head MultiGBASE-T1 testing according to the OA TC9 draft release on a MDI test head

Tailored OTA BTS test solution for FR2

Infrastructure testing Rohde & Schwarz introduces the R&S FE50DTR (dual transmit / receive) frontend modules. The frontends enable the up and down conversion of signals up to 50 GHz, while providing low-loss transmission at the lower IF frequency. The result is higher sensitivity on the receiver path and more power on the transmitter path. The modules can be mounted close to the OTA test chamber and

Accurate 5G antenna characterization up to mmWave presented at GSMA MWC 2017

Rohde & Schwarz demonstrated 5G antenna testing up to mmWave frequencies in a portable shielded chamber at the GSMA Mobile World Congress 2017 in Barcelona. Rohde & Schwarz demonstrated 5G antenna testing up to mmWave frequencies in a portable shielded chamber at the GSMA Mobile World Congress 2017 in Barcelona. The scalable R&S®ATS1000 antenna test system supports 3D antenna characterization, beamforming

Learn more about our new R&S®EPL1000:

Explainer Video EPL1000 Lean more about our new R&S®EPL1000:

Upstream signal analysis with the R&S®SFD

Convenient upstream measurements for testing network segments with the R&S®SFD DOCSIS signal generator. Convenient upstream measurements for testing network segments with the R&S®SFD DOCSIS signal generator. R&S®DSA | Upstream signal analysis with R&S®SFD | Rohde & Schwarz Optimize your DOCSIS HFC network with the R&S®DSA. Upstream signal analysis with the R&S®SFD. Findout more.

R&S®RTA4000 - 10 s boot up and ready to measure

The R&S®RTA4000 boots in just 10 seconds and is ready to measure. The R&S®RTA4000 boots in just 10 seconds and is ready to measure. Video, RTA4000, Oscilloscope, Boot time The R&S®RTA4000 boots in just 10 seconds and is ready to measure.

R&S®RTC1000 - 7 s boot up and ready to measure

The R&S®RTC1000 boots in just 7 seconds and is ready to measure. The R&S®RTC1000 boots in just 7 seconds and is ready to measure. R&S®RTC1000 video, oscillsocope, test and measurement, Rohde und Schwarz The R&S®RTC1000 boots in just 7 seconds and is ready to measure.

3GPP cellular V2X testing in production presented at GSMA MWC 2019

Rohde & Schwarz demonstrates cellular V2X non-signaling testing at GSMA Mobile World Congress 2019 in Barcelona. Rohde & Schwarz demonstrates cellular V2X non-signaling testing at GSMA Mobile World Congress 2019 in Barcelona. 3GPP cellular vehicle-to-everything (C-V2X) is one of the technologies considered for connected cars. Robust RF testing is fundamental for successful deployment of V2X communications

Add Logic Channels For MSO Operation

R&S®MXO 5 - Evolved for more challenges Add Logic Channels For MSO Operation R&S®MXO 5 SERIES OSCILLOSCOPE R&S®MXO 5

Signal integrity – measuring rise time using a true differential signal (part 2 of 4)

This video series demonstrates the calibration of a four-port network analyzer and the measurement of rise time, impedance vs. distance and skew on a board with differential lines. Learn more about time domain reflectometry (TDR) and time domain transmission (TDT) for signal integrity applications using the R&S®ZVA vector network analyzer from Rohde & Schwarz. This video series demonstrates the calibration

Troubleshooting WLAN with the R&S®FSW-B160R real-time spectrum analyzer

How to use the R&S®FSW-B160R real-time spectrum analyzer from Rohde & Schwarz to troubleshoot a local WLAN signal and discover the source of interference. How to use the R&S ® FSW-B160R real-time spectrum analyzer from Rohde & Schwarz to troubleshoot a local WLAN signal and discover the source of interference. FSW, Test & Measurement, Signal and Spectrum Analyzer, video, oscilloscopes This Video shows

How to set up and perform spectrum analyzer measurements with the R&S®ZNL

This video shows how to quickly set up a basic spectrum analysis measurement on the R&S®ZNL vector network analyzer. This video shows how to quickly set up a basic spectrum analysis measurement on the R&S®ZNL vector network analyzer. The R&S®ZNL combines network analysis, spectrum analysis and power measurement in one instrument. R&S®ZNL, ZNL, vector network analyzer, This video shows how to quickly

Radio based applications in the third decade of the nano-satellite revolution

Nano-satellites have proliferated and contributed to the development of novel space applications – particularly in the radio domain. Nano-satellites have proliferated and contributed to the development of novel space applications – particularly in the radio domain. This talk highlights current innovations in orbit and discusses ongoing application developments that leverage software defined technologies

Demystifying 5G – Where 5G waveform candidates lose their advantage

5G waveform candidates, such as FBMC, UFMC and GFDM, are designed to overcome limitations of LTE. For example, FBMC, UFMC and GFDM outperform LTE in spectral regrowth. Their much sharper power spectrum is a clear advantage over LTE. But what happens, if a non-linear device such as a power amplifier is used to amplify the signal? This video explores this behavior and provides interesting results. 5G

Boost your efficiency with quadcore power

With four independent outputs, each supplying up to 64 V or 20A, the new NGP800 power supplies will boost the efficiency in any lab. With four independent outputs, each supplying up to 64 V or 20A, the new NGP800 power supplies will boost the efficiency in any lab. Video, NGP800 promo Boost your efficiency with our new product