616 Results
Double frequency range for R&S Signal Generators
20-Apr-1998 | AN-No. 1GPAN03
Measurement of the phase difference between the MIMO layers is a challenging task in the design of 5G base stations. However, this measurement and its analysis can be easily accomplished using the R&S®NRQ6 frequency selective power sensor and R&S®VSE signal explorer software.
14-Jan-2022
This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to take Rel-6 measurements on transmitter characteristics and execute performance tests according to TS 34.121 V9.7.0, clauses 5 and 10.
27-Nov-2013 | AN-No. 1CM97
Generation of Test Signals for IS-136 (NADC) with Signal Generator SME
01-Jul-1999 | AN-No. 1GPAN35
R&S IMS Hardware Setup according IEC / EN 61000-4-6 (conducted immunity)
29-Mar-2007 | AN-No. 1SP31
EMI Debugging with the R&S RTO and R&S RTE Oscilloscopes
25-Jun-2014 | AN-No. 1TD05
This application note describes how transmitter (Tx) tests (TS25.141 Chapter 6) can be performed quickly and easily by using signal and spectrum analyzers from Rohde & Schwarz.
21-Oct-2014 | AN-No. 1MA67
Using R&S®ELEKTRA Migration Tool
The R&S®ELEKTRA EMC test software is the successor of the R&S®EMC32 EMC measurement software. Like the R&S®EMC32 EMC measurement software, the R&S®ELEKTRA offers a solution that controls complete EMC systems and automates measurements on equipment under test (EUT) that is being tested for emissions (EMI) and immunity (EMS) compliance. It has more features and test types compared to R&S®EMC32.As both software platforms use different file formats, R&S®EMC32 users who upgrade their existing software to the R&S®ELEKTRA platform need to perform a file conversion before migrating their data to the R&S®ELEKTRA platform. This is done by using the R&S®ELEKTRA Migration Tool, which is installed automatically with each R&S®ELEKTRA installation.This Application Note describes how to use the R&S®ELEKTRA Migration Tool (version 4.4 onwards) for converting the backup data into the XML format that can be interpreted by the R&S®ELEKTRA software. It also provides recommended conversion steps (Chapter 5) and troubleshooting tips (Chapter 6). For instructions on migrating the data using R&S®ELEKTRA Migration Tool below version 4.4, refer to the R&S®ELEKTRA user manual. For better user experience, we recommend using the latest software version for migration.This Application Note does not describe the steps to backup data using the R&S®EMC32 or R&S®ES-SCAN software. For procedures on how to do so, refer to their respective manuals.
04-May-2023 | AN-No. 1SL396
.Fast beamforming verification helps to speed up R&D for beamforming antennas and improve performance of your product.
07-Jul-2020
On-wafer characterization at sub-THz frequencies
12-Dec-2023
Measurements on RFID Components According to ISO/IEC 14443 Standard
25-Jan-2010 | AN-No. 1MA113
Vulnerabilities of LTE and LTEAdvanced Communication White Paper
16-Sep-2014 | AN-No. 1MA245
Models: R&S®TSME6, R&S®TSMA6B, R&S®TSMS53DC, R&S®TSMS-OMN70, R&S®TSME44DC
Models: R&S®FSC3, R&S®FSC3, R&S®FSC6, R&S®FSC6
Models: R&S®ESL3, R&S®ESL3, R&S®ESL6, R&S®ESL6
High Speed Uplink Packet Access (HSUPA) White Paper
09-Feb-2006 | AN-No. 1MA94
Operation Guide for HSDPA Test Setup according to 3GPP TS 34.121
13-Oct-2009 | AN-No. 1CM72
Automated Solution with High Efficiency
This application note, introduces an example of automated testing of 5G UE PA with R&S signal generator, signal and spectrum analyzer, vector signal explorer software, power meter along with power supply.
09-Aug-2021 | AN-No. 1SL365
Using the Frequency Conversion Mode of the ZVR Vector Network Analyzer
19-Jan-1999 | AN-No. 1EZ47
This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to perform HSDPA Tests (from Rel.5 up to Rel.8 / DC-HSDPA+) measurements on transmitter characteristics and receiver characteristics in line with TS 34.121 V9.5.0.
17-Aug-2012 | AN-No. 1CM96
Rohde & Schwarz offers RF solid-state amplifiers for various frequencies ranging from 9 kHz to 6 GHz and delivering CW power up to 80 kW.
27-Apr-2016
This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators and CW sources from Rohde & Schwarz.
21-Oct-2014 | AN-No. 1MA114
Operation Guide for HSUPA Test Setup according to 3GPP TS 34.121
07-Oct-2009 | AN-No. 1CM73
The R&S FSW signal and spectrum analyzer measures and analyzes time sidelobes to optimize compressed radar signals as well as radar hardware components and systems.
22-Oct-2020
Operating Guide for WCDMA Test Setup according to 3GPP TS34.121
15-Apr-2009 | AN-No. 1CM71
Models: R&S®THR9 - 1 amplifier, R&S®THR9 - 2 amplifier, R&S®THR9 - 3 amplifier, R&S®THR9 - 4 amplifier, R&S®THR9 - 6 amplifier, R&S®THR9 - 8 amplifier
Models: R&S®ZNL3, R&S®ZNL4, R&S®ZNL6, R&S®ZNL14, R&S®ZNL20
Models: R&S®FSC3, R&S®FSC3, R&S®FSC6, R&S®FSC6
Certificate - MTN Eswatini Q4-2022 Benchmarking Campaign - Best Network Performance Score