6537 Results
Rohde & Schwarz user manual for the IEEE 802.11 WLAN application of the R&S®SMBV100B, including IEEE 802.11 a/b/g/n, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11be; options R&S®SMBVB-K54/-K86/-K142/-K147.
The compact solution consists of a portable direction finder, a direction finding antenna and the R&S®MobileLocator location software that reliably guides to the source of RF interference. fastest, car-based, interference hunting solution, multipath environments, portable direction finder, direction finding antenna, MobileLocator, location software, RF interference.
For the first time, users can trigger on corrected waveforms and focus on debugging the true device characteristics. 9 12 RTP, oscilloscope, scope, MSO, user interface, tool bar, toolbar RTP- see the difference. Compensate signal losses from test fixtures or cables in real-time.
This video shows how the AREG800A radar echo generator can characterize the performance of the world’s first 28 nm RFCMOS radar SoC from NXP, including unique minimum distance down to the airgap for FMCW radars and measuring performance in the presence of interference. automotive, radar object simulation, automotive radar This video shows how the AREG800A radar echo generator can characterize the performance
Change history in CISPR 11:2024 CMV (Commented version): Amendment 2 to the 6th edition was published on January 18th, 2019. In Europe, it was published as EN 55011:2016/A2:2021 and became mandatory on April 9th, 2024. 7th Edition, developed by CISPR sub-committee B was published on February 13, 2024. In Europe to be published as EN 55011:2024 (date of withdrawal not defined yet).
Power and sensitivity measurements in a shielded environment allow for detecting antenna failures in production. compact solution, mobile device production testing, TS7124 RF, shielded box, multiport, CMW100, communication, manufacturing, test set Rohde & Schwarz presented the most compact solution for mobile device production testing at the GSMA Mobile World Congress 2016 in Barcelona.
Reliable voice communications between air traffic controllers and pilots are vital to passenger safety. A lack of communications can jeopardize the safety of a hundred people or more. Critical situations in air traffic are often caused by undetected simultaneous radio transmissions.
For complex measurement tasks where several screen displays are helpful, you can drag and drop your signals anywhere on the screen.
Rohde & Schwarz user manual for the Satellite Navigation GPS/Galileo/GNSS/GLONASS, NavIC, BeiDou,SBAS/QZSS application of the R&S®SMBV100B; options R&S®SMBVB-K44/-K66/-K94/-K97/-K98/-K106/-K107/-K108/-K109/-K122/-K123/-K132/-K133/-K134/-K135/-K136/-K137.
White PaperThis white paper summarizes significant additional technology components based on LTE, which are included in 3GPP Release 12 specifications.
04-Aug-2015 | AN-No. 1MA252
Rohde & Schwarz User Manual for the Fading Simulator application of the signal generator R&S®SMW200A, including Dynamic Fading, Enhanced Fading Models, MIMO-Fading/Routing, High Order MIMO, Customized Dynamic Fading: options R&S®SMW-B14/-B15/-K71/-K72/-K73/-K74/-K75/-K820/-K823.
Learn more about wireless IoT technologies, associated test challenges and practical test solutions. Rohde Schwarz, R&S, IoT, eCall, NGeCall, IoT testing, SMBV100, CMW500 Next generation eCall (NGeCall) is based on a full IP architecture operating via 4G networks.
Rohde & Schwarz solutions characterize radar signals and components to improve the reliability of autonomous driving vehicles. Automotive radar signal analysis in the E-band with up to 8.3 GHz analysis bandwidth with just a single instrument. The video demonstrate the analysis of a 4 GHz wide FMCW radar signal from a real device under test.
Based on a novel two-tone technique, the R&S®ZVA vector network analyzer with the R&S®ZVA-K9 embedded LO mixer delay measurements option enables absolute group delay measurements on mixers and frequency converters without the need for a calibration mixer. In addition, the much easier calibration requiring only a through connection significantly simplifies the setup for this measurement.
The R&S ® CMW-KM052 option for the established R&S ® CMW500 wideband radio communication tester helps to detect vulnerabilities in the IP connection security of IoT devices, mobile devices and car telematics units under controlled network conditions.
The R&S®ZNL vector network analyzer offers a wide frequency range from 5 kHz to 3 or 6 GHz, an output power from –40 dBm all the way up to 0 dBm, and a wide dynamic range of typically up to 130 dB. If you don’t need such a high dynamic range, simply increase the IF bandwidth to speed up your measurements instead.
This eliminates human inattention, ensures reproducible results and simplifies the test documentation. A typical application is EMS testing with R&S®EMC32 or R&S®ELEKTRA test software. This video shows how R&S®AdVISE can detect artefacts on a dynamic turn indicatore.
R&S®MXO 4 SERIES OSCILLOSCOPE, oscilloscope, scope, R&S®MXO 4, independent spectrum analysis R&S®MXO 4 provides the fastest and most accurate spectrum analysis in its class with superior RF measurement capability.
The whole signal setup including the correct LTE settings, leveling, interferer simulation, fading and trigger configuration are done by push of a button. For easy test signal generation the R&S®SMW200A vector signal generator features an LTE test case wizard, which is demonstrated in this video.
Equipped with the R&S®RTO-K11 I/Q software interface option, the R&S®RTO provides the I/Q data of the acquired signals to the external R&S®FS-K10xPC LTE analysis software for demodulation and detailed analysis. video, LTE, MIMO, FS-K10xPC, RTO, RTO-K11 Rohde & Schwarz at EuMW 2012: Up to 4 LTE MIMO antenna signal analysis with one oscilloscope
The R&S®ZVA110 enables millimeter-wave measurements from 10 MHz to 110 GHz in a continuous sweep with high stability and ease of configuration. Combined with other R&S®ZVA-Zxx millimeter-wave converters, all common waveguide bands up to 500 GHz are covered.
The R&S CMW500 mobile radio tester, the unrivaled network simulator for all IoT technologies, supports latest 3GPP Release 17 NB-NTN technology for R&D and type approval testing. cmw500, 5GNR 3GPP Release 17 NB-NTN (non-terrestrial networks) device testing
This eliminates human inattention, ensures reproducible results and simplifies the test documentation. A typical application is EMS testing with R&S®EMC32 or R&S®ELEKTRA test software. This video introduces the tracking feature of R&S®AdVISE.
Learn more about wireless IoT technologies, associated test challenges and practical test solutions. Let’s talk IoT, Rohde Schwarz, R&S, IoT, eSIM, test profile Follow the Rohde & Schwarz ‘Let’s talk IoT’ video series which discusses hot topics from the Internet of Things.
Emulating real world conditions in the lab for testing the behavior of IoT devices, such as for NB-IoT and LTE-M devices, can be very complex. The video demonstrates the easy-to-use Field-to-Lab test solution from Rohde & Schwarz that brings real network conditions to the lab.
This eliminates human inattention, ensures reproducible results and simplifies the test documentation. A typical application is EMS testing with R&S®EMC32 or R&S®ELEKTRA test software. This video shows how to use R&S®AdVISE to monitor the number of revolutions of rotating objects.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates. Video, 5G, Wireless communication, Verizon Wireless 5G waveform This video demonstrates how to test a power amplifier that operates at 28 GHz.
CRPA systems are based on the basic principles of nulling and beamforming that are both explained in this video.
Next Generation eCall uses LTE and IMS for an emergency call. The R&S®CMW500 radio communication tester emulates an LTE network with integrated IMS server. Equipped with the R&S®CMW-KA096 test software enables to test NG eCall-capable in-vehicle systems.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, frequency bands and waveforms. 5G, mobile network testing, NSA, non-standalone mode, network scanner, drive test, SMW200A, TSMA6, TSME6, ROMES4 The video demonstrates how to measure all synchronization signal blocks (SSBs) in different frequencies with all SSB indices.