228 Results
R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications.
26-May-2020 | AN-No. 1DC02
This application Note is based on CMW500, SMBV100B and Vector CANoe.Car2x Software and guides to how to simulate the specific Cellular Vehicle-to-Everything (C-V2X) wireless environment in respect to road transport scenarios and transmitted messages around the Device Under Test (DUT) like a Telematics Control Unit (TCU). It shows how to verify and validate the C-V2X application of the DUT in laboratory environment. The virtual simulation scenario is not limited to the requirements of CSAE53-2017 specification, and it could be modified by user according to this operating guide with CANoe.Vehicle-to-everything (V2X) is a new generation of information and communications technologies that connect vehicles to everything. The objective of V2X is to increase road safety and manage traffic efficiently.C-V2X is designed to offer low-latency vehicle-to-vehicle (V2V), vehicle-to-roadside infrastructure (V2I) and vehicle-to-pedestrian (V2P) communications services to add a new dimension to future advanced driver assistance systems (ADAS). C-V2X as one communications standard defined by 3GPP in Release 14 uses LTE technology as the physical interface for communications. The standard describes two types of communications. The vehicle-to-network (V2N) communications type, exploits the cellular Uu interface, uses traditional cellular link to enable cloud services to be integrated into end-to-end solutions, e.g. to allow road and traffic information for a given area to be distributed to the vehicles.The second type is referred to as direct or PC5/Sidelink (V2V, V2I, V2P) communications, where data transmission takes place over the PC5 interface. In that type, C-V2X does not necessarily require a cellular network infrastructure. It can operate without a SIM and without network assistance and uses GNSS as its primary source for time synchronization.Verifying system functionality and performance exclusively by field testing in a real-world environment can be time-consuming, costly and very challenging. Requirements regarding functionality, and consequently the required assistance functions, are constantly changing. Due to this fact, test solutions are needed during the development and introduction phase to verify compliance with the standards. The PC5 direct communications type allows exchange of time sensitive and safety relevant information. Using a mobile communication tester like the R&S® CMW500 together with a C-V2X scenario simulation tool delivers reproducible test scenarios. This is essential for the standardization of verification processes for C-V2X in order to obtain reliable and comparable results, and it helps to demonstrate that end-to-end functionality between two C-V2X devices from different vendors works properly.
02-Jun-2021 | AN-No. GFM341
This application note explains how to generate phase coherent signals with a compact easy-to-use solution.
07-Sep-2016 | AN-No. 1GP108
The application note guides developers and manufactures of Sigfox Devices to perform the required and recommended measurements with test solutions from Rohde & Schwarz.
15-Nov-2017 | AN-No. 1MA294
The first part of this educational note presents the applications for and the most important types of signal generators. This is followed by a description of the construction and functioning of analog and vector signal generators.
03-May-2016 | AN-No. 1MA225
This application note explains how to set up a vector signal generator for LTE FDD repeater conformance testing accordingg to various test cases defined in the 3GPP Technical Specification 36.143.
26-Apr-2013 | AN-No. 1GP85
This application note explains how to play back multiple test signals fast and flexibly using an ARB generator from Rohde & Schwarz. Waveform sequencing enables high-speed operation for production testing.
29-Feb-2012 | AN-No. 1GP53
This application note explains how to test your remote radio head with Rohde & Schwarz test and measurement equipment.
05-Aug-2013 | AN-No. 1GP78
This application note describes the technology behind NG eCall and presents conformance tests for NG eCall using the R&S®CMW500 RF tester.
06-Jun-2019 | AN-No. GFM312
1MA210 - Testing LTE Release 9 Features. This Application Note describes the T&M methods for LTE Release 9 features using Rohde & Schwarz instruments.
26-Apr-2013 | AN-No. 1MA210
This application note summarizes the Rohde &Schwarz test solutions for LTE-Advanced (Release 10) using Vector Signal Generators, Signal and Spectrum Analyzers and the Wideband Radio Communication Tester.
03-Sep-2014 | AN-No. 1MA166
The R&S®Pulse Sequencer software offers a powerful mechanism to model sequences that are often required for meaningful radar receiver test cases. The sequences can consist of many individual elements, such as pulses defined by the software or imported waveform segments.
03-Oct-2017
Connectivity of R&S<sup>®</sup> Test Solutions with AWR<sup>®</sup> Visual System Simulator™ (VSS)
20-May-2010 | AN-No. 1MA174
Converting Existing Waveform Files from R&S AMIQ or Binary into R&S SMU200A or R&S AFQ100A Format
18-Jun-2009 | AN-No. 1GP64
This application note describes how all required transmitter (Tx) tests can be performed quickly and easily by using signal and spectrum analyzers.
11-May-2016 | AN-No. 1MA154
Importing Data in ARB, Custom Digital Modulation and RF List Mode
22-Dec-2010 | AN-No. 1GP62
Amplifier measurements with Rohde & Schwarz spectrum analyzers Flyer
The R&S MATLAB® Toolkit for Signal Generators provides scripts and routines for remote controlling Rohde & Schwarz signal generators. For example, it includes a MATLAB® script that turns I/Q vectors into the R&S waveform file format for use with an ARB generator.
26-Apr-2013 | AN-No. 1GP60
TETRA, the TErrestrial Trunked RAdio, is the professional mobile radio standard (PMR) used world wide by governmental safety and security authorities and organizations, as well as by private utilities from energy suppliers through to transport.
26-Apr-2013 | AN-No. 1MA189
This application note provides a brief summary of the transmission modes (TM) in LTE and describes the beamforming measurements for base stations (BS) and user equipment (UE). The T&M options using various Rohde & Schwarz instruments are also presented.
26-Apr-2013 | AN-No. 1MA187
This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.
12-Nov-2014 | AN-No. 1MA208
Rohde & Schwarz Instrument Security Procedures for the R&S®SMBV100A vector signal generator.
Rohde & Schwarz instrument security procedures for the R&S®SMBV100B vector signal generator.
Rohde & Schwarz user manual for the LoRa application of the R&S®SMBV100B, option R&S®SMBVB-K131.
Rohde & Schwarz user manual for the NFC application of the R&S®SMBV100B, option R&S®SMBVB-K89.
Rohde & Schwarz user manual for the Crest Factor Reductions application of the R&S®SMBV100B; option R&S®SMBVB-K548.
Rohde & Schwarz user manual for the CDMA2000 application of the R&S®SMBV100B; option R&S®SMBVB-K46.