1804 Results
How to create a Hardcopy using R&S<sup>®</sup>Instrument Drivers
11-Dec-2009 | AN-No. 1MA160
VSWR Measurement in 75 Ω Systems - using the R&S<sup>®</sup>FSH3-TV TV Analyzer
01-Mar-2008 | AN-No. 7BM72
This application note explains how to setup R&S®AdVISE to monitor the temperature of an EUT by using an infrared camera.
14-Sep-2020 | AN-No. 1S008
With R&S instruments like the R&S®SMW200A and the R&S®FSW realistic NPR measurements can be performed by using modulated signals. Noise Power Ratio Measurements | Rohde & Schwarz With the R&S®SMW200A and the R&S®FSW realistic NPR measurements can be performed by using modulated signals. Increase the performance of your amplifier.
The video shows a test using a moving vehicle and how the data is evaluated using an oscilloscope. application, distance and speed measurement, radar, velocity tests, theory, basics and formulas, moving, oscilloscope. Video 1/2: Radial velocity measurements
Measurements on Tuners using the Audio Analyzers UPL or UPD and Signal Generator SMT
16-Feb-1998 | AN-No. 1GA24
This paper provides an important insight into the design and measurement challenges around the key topic of 5G New Radio in collaboration of a number of industry partners.
26-Nov-2018
Precise pulse measurements Video ZVH, FSH, Precise pulse measurements Precise pulse measurements using the R&S®FSH/ZVH handheld spectrum analyzer
Introduction of report templates whoch can be used to make a final report. Introduction of report templates whoch can be used to make a final report. Introduction of report templates whoch can be used to make a final report.
Rohde & Schwarz offers a compliance test solution using the R&S®RTE or the R&S®RTO oscilloscope.
27-Jan-2016
The R&S®EVSG1000 and R&S®EVSF1000 are signal level and modulation analyzers that reliably analyze GBAS systems during ground and flight inspection when used together with the R&S®EVSG-K4 option.
27-Jun-2019
A simple concept with Azure IoT
This document describes an approach how to establish a remote connection between the instrument and the cloud using an IoT broker.
15-Dec-2020 | AN-No. GFM319
Read this educational note and dive into the discussion about the six most important transformer measurements: turns ratio, mutual inductance, phase angle, primary and secondary inductance, leakage inductance, and interwinding capacitance.
28-Feb-2024
Five tips and tricks to maximize the effectiveness of using R&S®ELEKTRA. Five tips and tricks to maximize the effectiveness of using R&S®ELEKTRA. Five tips and tricks to maximize the effectiveness of using R&S®ELEKTRA.
Discover how to easily decode Flexray using an R&S®RTO. Discover how to easily decode Flexray using an R&S®RTO. RTO2000, decoding, flexray, automotive Discover how to easily decode Flexray using an R&S®RTO.
Using MATLAB for Remote Control and Data Capture with R&S Spectrum and Network Analyzers
24-Sep-2007 | AN-No. 1EF46
This application note addresses the diverse possibilities of interoperability between Rohde & Schwarz power sensors and Rohde & Schwarz signal generators. All current and many legacy Rohde & Schwarz signal generators offer the capability of directly connecting power sensors. This enables power measurements without the need of a base unit or separate PC to display the readings. Furthermore, sensors can be used for special tasks like filling a user correction table or continuously controlling levels at crucial points in the measurement configuration.
31-Aug-2023 | AN-No. 1GP141
This R&S®FSW-K70 application sheet describes the challenge of determining typical signal parameters of an unknown signal from the results of a basic measurement using the R&S FSW VSA application.
It can be used for testing complex multiport devices or multiple devices under test in parallel.
Transient Measurements on GSM/PCN Synthesizers
03-Jun-1998 | AN-No. 1EF08
This paper describes the characterization of aluminum electrolytic capacitors specifically used in AC-DC power converter applications. It will be discussed why this capacitor technology is critical regarding lifetime and why it cannot be substituted simply by any another capacitor technology. Different aging effects of the capacitor will be discussed. Usage of the capacitor in different AC-DC converter topologies will be presented. Simulation circuits will be used to analyze the capacitor in more detail before suitable measurements will be performed to demonstrate a real example of a switching-mode power supply (SMPS).After the introduction into the aluminum electrolytic capacitor basics and theory, this paper will also present all important and possible measurements of capacitor parameters, like capacitance, equivalent series resistance (ESR) and ripple current. This includes in-circuit measurement which can be performed with an oscilloscope. An LCR-bridge is used to obtain high accuracy measurements in addition. A comparison between the two measurement methods will be presented. Furthermore, the required measurement hardware for the in-circuit measurements and the bridge measurement will be discussed and presented.Lastly, two different lifetime calculation methods are presented and a real example is used to compare the advantages and disadvantages of the different methods.Thanks to Mr. Frank Puhane from Würth eiSos GmbH & Co. KG who provided me with all aluminum electrolytic capacitor samples including the prepared capacitor with build-in temperature sensors to perform all measurements. Furthermore, his great expertise was very beneficial and helpful to create this premium application note.
07-Feb-2023 | AN-No. 1SL388
ACP Measurement according to IS 54 (NADC) using the FSE Spectrum Analyzers
17-Jan-2002 | AN-No. 1EF32
This paper will provide an overview of the current status of the ITS worldwide with a focus on the IEEE 802.11p PHY. Additionally, the paper provides information on test and measurement solutions for devices and components used in ITS.
23-Jan-2014 | AN-No. 1MA152
Discover how to easily deocde SENT using an R&S®RTH handheld oscilloscope. Discover how to easily deocde SENT using an R&S®RTH handheld oscilloscope. RTH, handheld oscilloscope, SENT Bus, decoding, automotive Discover how to easily deocde SENT using an R&S®RTH handheld oscilloscope.
R&S®Time Code Inserter: Time Code-Based A/V Distortion Analysis
16-Apr-2013 | AN-No. 7BM84
High-speed serial interfaces often transmit data with differential signaling and differential probes can be used to access signal traces. In addition to differential inputs, these probes have a ground connection.
02-Nov-2022
Load transient response – enhancing loop stability testing
09-May-2023
This application note provides a brief summary of the transmission modes (TM) in LTE and describes the beamforming measurements for base stations (BS) and user equipment (UE). The T&M options using various Rohde & Schwarz instruments are also presented.
26-Apr-2013 | AN-No. 1MA187
30 dBm + 30 dBm = 60 dBm? It is well known that it is not as easy as that.
This application note supplies a free of charge software tool that can e.g. be used to add or subtract an arbitrary number of power, to convert power and voltage units from the linear to the logarithmic scale.
10-Dec-2018 | AN-No. 1GP77